1 / 16
Sanding Wedge (Schleifklotz) 20-25-30-40-50mm Width (breit) — zdjęcie 1
1 / 16

Sanding Wedge (Schleifklotz) 20-25-30-40-50mm Width (breit)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix from Thingiverse Thing #4693620 by Ralph Hoerhager. Thanks Ralph for this great idea. Simple but very…

Ocena
5 / 5
Polubienia
86
Pobrania
654
Wydruki
4
Wyświetlenia
3299
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remix from Thingiverse Thing #4693620 by Ralph Hoerhager. Thanks Ralph for this great idea. Simple but very effective!

Main differences and reason for my remix:

  1. This wedge fits 280mm Sandpaper sheets (typical in Europe 280x230mm). Org. Thing had total length of 150mm, I did not have sandpaper that fits this size. So I redesigned it to 130mm and made the ribs a bit slimmer.

Advantage of this is, you just cut off the width, and the sandpapaer will fit.

  1. The knurled knobs in the files can be printed optional with M6-nut inserted (means you need to break the print after the height is achieved, insert the nut, pay attention that the nut is flush (not jeopardize your nozzel and printerhead!).

You'll need a M6 nut and a M6 screw with hexagon head.

2021-03-04-Edit: (Re-) Designed in widths of 20/25/30/40/50mm.

Print Settings

Printer Brand:

Prusa

Printer: 

i3 MK3

Rafts:

No

Supports: 

Doesn't Matter

Resolution:

0.2mm (or your choice)

Infill: 

20%, your choice

Filament: Doesn't matter PLA (others are your choice) Definitely your choice!


 

Notes:

 

I printed the wedge with ribs showing to top, no or almost no support necessary.

 

 

 

Category: DIY

Tagi