Liczymy pasujące modele…
Habe lang daran rum getüfftelt, um meine GCM 12 staubfreier zu bekommen. Persönlich würde ich sagen, dass der Adapter bei 95% liegt, aber das ist meine subjektive Ansicht, aber besser wie die Original :-). Die Gummilippe hab ich mir…
Adapter: Bosch PRO Battery → TS10 Soldering Iron Mount (Press-Fit, No Glue) This adapter allows Bosch PRO batteries to be used with a TS10 soldering iron mount . The design intentionally avoids adhesives and instead relies on a tight…
A friend of my son broke this drill bit. So I created a new one. This one is a bit longer than the original one as the second part was lost and I had to guess the length. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes…
I bought a Bosch Klein toolbox for my son. He is heavily using the bolts and nuts so I decided to print a few more. They are working and looking perfect as the original ones. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
Spare gear for Bosch Multi-Purpose Slicer MAS 4200. Print instructions Unassociated tags: MAS 4200 Category: Replacement Parts Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: Yes Resolution: 0.20 Infill: 30%…
Simple Attachment Adapter for the original Bosch Unlimited Wall / Charging Mount.
Adaptor that fits Nilfisk Buddy II 12 hose and Bosch Professional tablesaw and mitersaw, might fit other tools as well. Recommend printing in PETG or ABS for strengt and durability. Print upright with support for the bridge over the clips…
Tool for easy cleaning holes of Bosch meat grinder drilled disks. Tested on MFW3X17B model. Printed with PETG but other materials can be used as well.
T-Nuts and Knobs for M6 Screws to Fix it on the BOSCH Table Saw - GTS 635-216 Professional
Cap/cover for Bosch Series 4 MUM 5. Seals the bowl holder so the Machine can still be operated without a bowl. The cover is put in with the three dents aligning with the three channels in the bowl-holder and fastened with a…
Mesh model of my Bosch GSR 12V-15 cordless drill for use in modelling
Mesh model of my Bosch GSR 12V-15 FC cordless drill for use in modelling
Mesh model of my Bosch GSR 12V-15 cordless drill for use in modelling. Scanned with a Creality Scan Otter.
Eine kurze Schiene für die Bosch Tischkreissäge GTS 635-216 mit 3 Bohrungen für den Einschlag von M8 Muttern. Beim einschlagen der Muttern vorsichtig vorgehen, damit die Schiene nicht beschädigt wird. Die Schienen gleiten perfekt durch…
This is a remix of https://www.printables.com/model/254729-circle-router-jig-for-bosch-gkf-12v-8 Take a look there for more details. I have a 300x300 format printer and wanted to print the base of the jig in one piece. So i merged the…
I simply modified the holes for the north american wall plug to fit in, and i also made more space inside the gun space.
Not actually a functionally necessary part. You can totally live without one, but it was a nice little 3D design training project. Printed mine in PLA, 0.6mm nozzle 0.2mm layers. Fits snug and secure. Wife loves it, which is important for…
Printing Parameters: Material: TPU Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Surface: fuzzy
A MAkita MBOX inlay for a Bosch Pro electric screwdriver / drill
Drill sharpeners in various sizes for DIY enthusiasts - BOSCH PWS 9-125 CE - FLEX orbital sander The drill sharpener uses high-speed rotation for grinding (FLEX orbital sander), it is set at an angle of 118 degrees in total for both…
This is a guard that you put at the end of this saw
This holder is designed to hold the Bosch 4A Standard battery charger for eBikes. It features a cutout at the bottom to route the power cable as well as little standoff feet so it can be mounted on top of surface-mounted cables.
I recently bought a Bosch Unlimited 10 Vacuum Cleaner and even though it is delivered with 4 extra accessories, there is only one holder , allowing to put only 2 accessories on the rail. There is place for an extra holder on the other…
The adapter enabels a second line for suction with a vacuum cleaner. While one side fits to the table saw, the other two are for a 35 mm line (inner diameter) and a 32 mm (outer diameter) line. In my case, I used this for an additional…
To be able to use the Bosch toy screwdriver with MakeDo screws, I conveniently edited @GuillaumeRico 's FreeCad file for M12 bolts. The motor is barely powerfull enough to actually screw the MakeDo screws in more solid cardboard, but it…
Adapter for the Bosch GCM SJ miter saw. The adapter is rotatable and equipped with a stop, allowing the hose to be fed in from all sides without touching the guide. Cut open the small tabs on the Bosch connector with a utility knife; they…
This is a battery pin protector for e-bikes (Pedelecs) with the Bosch Smart System, which has a new battery connector. It is intended to protect the battery connector when the battery is removed or your bike is equipped with a second…
Bosch GKF 18V-8 baseplate with small center hole. Stops the router from tilting when chamfering small corners.
Die perfekte Parkstation für deine Bosch EasyLamp 12! Mit der EasyDock 12 sitzt deine Lampe immer fest, schnell griffbereit und optimal positioniert – egal ob an der Wand, im Schrank oder unterwegs. Sitzt. Passt. Leuchtet! Diese clevere…
Disclaimer Batteries can be dangerous if mishandled. Use them safely by applying common sense and best practices . You have been warned. Prerequisites Bosch 14.4v battery, refer to photos for the compatibility; 18650 batteries, 8x; Charge…
Original: https://www.printables.com/model/372300-bosch-ebike-charger-holder-bpc3400-4a/remixes
Ein anschraubbarer Wandhalter für BOSCH GO 3 Schrauber.Mit 4mm schrauben anzuschrauben.
As far as I am aware, there are two Sortimo L-Boxxes for inset boxes. One is the i-BOXX 72 and the other is the L-BOXX 102. I was looking for some small boxes, but none of the models I found were suitable. Therefore, I created this model.…
This model is designed to protect your Bosch smart system charger BPC3400 from damage while handling it. With the integrated feet, the charger will hover a little bit above the floor. This keeps rocks and stones from scratching it and…
I often switch my small Kiox screen with my Bosch SmartPhone Grip to use my smart phone as a navigation… but this was not working lately. The heavy phone, my driving style or the bumpy road was often to much for the single mount arm of…
Führung für Kette auf dem Kettenblatt. Die Kette ist mehrmals nach innen abgesprungen und hat sich zwischen Rahmen und Ketteblatt verkeilt. Der Ring lässt die Kette nicht nach innen abspringen. Es gibt eine offene Version zur Montage,…
Print without supports standing. 0.4mm nozzle, 0.2mm layer height; 3 perimeters, 10-15% infill. Printed with PLA without issues. The lid fits a little on the tight end, it helps wiggling it on by tilting towards the blades. Snug and…
Replacement latch for a Bosch box. Print it in ABS for strength. Use a lot of perimeters - it needs to be as solid as possible. No supports needed.
Zero clearance inserts for Bosch PCM 8S sliding mitre saw. Inserts are intended to use only when saw is in vertical position, for other angles please use original inserts. For dimensions please see diagram, printer with table at least…
Update 2026-02-16 The ABS has completely disintegrated. I printed another set in PETG as a bandaid, but don't expect those to last long. Once those fail, I'll try MJF (nylon). And after that, maybe try a mold + silicone? ASA also…
This battery holder was inspired by https://www.printables.com/model/396692-einhell-battery-holder-v2 however I had batteries from Bosch, Einhell and Parkside so a holder for only one system was not good enough. Also I disliked that the…
Insert M5 or M6 screw nut in to use it. M5 nut have a slim version, for special 4545 profiles. To work well, the nut is difficult to push in, a pliers can help.
To install in the rail, simply insert and rotate it quarter turn, and push trough the HUB.
To install in the rail, simply insert and rotate it quarter turn, and push trough the HUB.
To install in the rail, simply insert and rotate it quarter turn. To print it easy, slice it to two pieces, and glue it.
Inlay for a standard Bosch L-Boxx to hold multiple 18V batteries + two GAL 18V-160 charger. The design is modular, so you can adjust it to the batterie sizes. The two vertical batterie places can only hold up to a ProCore 5.5ah, anything…
I think two size is enough for cable management, a smaller and a bigger. To install in the rail, simply insert and rotate it quarter turn. Tight enough so it doesn't slide in the rail. Use a 5-6 perimeter layer thickness to make it strong.
For some reason the excellent model by @m98custom1212 (thanks for sharing it) came out a bit loose so I decided rather than experiment with scaling the print, I made a couple mods to the step file. You can see these on the picture below.…
Wandhalterung für das Bosch E-Bike 4a Ladegerät (Smart System - BPC3400) Wall bracket for the Bosch E-Bike Battery
bosch GAL 18V-40 charger mount adapter for qbrick prime toolbox I use https://www.thingiverse.com/thing:6102493
I was looking for an attachment that could help eliminate voids when filling 3D prints with concrete. I cloned the mechanism of Hitachis implementation of this tool from photos found online. Required hardware 4 x DIN 934 M3 Nut 4 x DIN…
This is a spare part replacement for the direction adjusting lever of my Bosch GSR 18-2. Original Part-No. 2 609 101 009. The part is mounted in many other Bosch tools. Printed with Prusament PETG. Due to the sloping surfaces, I printed…
Bosch GKF 600 Hand milling machine - dust extraction - vacuum adapter
Model przedstawia drukowany klucz serwisowy przeznaczony do odkręcania nakrętki kontrującej zębatki silnika Bosch CX4 stosowanego w rowerach e-MTB . Narzędzie zostało zaprojektowane z myślą o precyzyjnym dopasowaniu do nakrętki oraz…
i dont like the original one bigger air intake, more suction power seamless fit Designed in Germany - Thanks Freecad
English Description This model set includes IKEA SKÅDIS–compatible holders for Bosch Professional GSR 12V Screw driver and its accessories , mounted using the Low Profile T-Clip from @tchoupshop_82950 . The models are designed to: provide…
This mount allows you to store Sortimo Bosch L-Boxxes within an IKEA PAX. You can use the original holes within the PAX to fix the sliders. For a proper mount, you need 4 screws to hold one L-BOXX. I used the following parts: IKEA PAX…
This project is a spare part for BOSCH Rotak Lawn Mower 0,2 layer 30% infill Support needed ("on build plate only" must be enabled). It is necessary to set the pause to 10mm and install the nut. Use standard nut M6 according DIN934.
This is a bit holder for all cordless screwdrivers (such as those from Bosch Professional) that have an M4 thread. The bits hold well and do not fall out even when upside down. However, they are not too tight, so they can be easily…
I made a stand for a BOSCH GO 3 electric screwdriver so it can stay in a vertical position. There are 3 versions available : one only for the GO 3, another for the GO 3 with a standard bit inserted, and a third version for the GO 3 with a…
Attachment for the coffee grounds container, not the coffee grounds container itself. Part Number: 12011727 Used by: Bosch CTES33W, Siemens CT636LES1, Neff N 90
replacement for the dust bag holder for Bosch vacuum cleaner. Please check first, if this is the right on. Bosch part ID 00657994
This 3D model is a filter housing designed specifically for the Prusa Core One+ . It is compatible with the Bosch R2598 activated carbon filter, commonly used as a cabin air filter in Ford and Volvo vehicles. Why the Bosch filter? Because…
I made this holder for the BOSCH GSR12V-32 for the SKADIS T-Nut system. It uses M2.5x12 screw to fix the holder to the pegboard.
Both stoppers at the end of the slide rail on my freezer have broken off. I filed down the lower end of the stopper so that the replacement stopper is long enough to reach the drawer. The new stopper is taller and wider than the original,…
Info: Needed a solution to ensure the holes for installing a floating shelf would end up perpendicular to the Wall Surface and a Tool mounted Spirit Level seemed like a good solution so a 3D Scan and some CAD Modelling later we have…
A mockup LSU 4.9 wideband lambda/o2 sensor. Usufull to find the perfect location of the sensor bung when building custom exhaust on car or bike. Based on a official Bosch LSU 4.9 CAD. Only sensor tip is cut (to avoid clashing into the…
Bosch Glide miter saws come with a dust collection bag. While that works for the most part I wanted to connect to my dust collection system. To use this item take the red plastic ring out of the Bosch dust collection bag and snap it onto…
Male to male and female to female adaptors for bosch GAS18V-02N vacuum
If you need to access the guts of the dishwasher and remove the door panel, just assume you'll need a couple of these. The stock clip design is incredibly weak.
Its an emergency radio with several functions: powered by Bosch 18V professional battery or an external power supply. FM-Tuner with bluetooth function. Remote controller included. DC Output to connect devices to the battery (e.g.…
Simple remix to connect the Bosch UniversalSander directly to the hose of a Kärcher. Don't forget to add support to the lock mechanism when printing (.. 2nd print in the picture).
Honeycomb wall holder for Bosch Go2 screwdriver and eight bits
Wheel for a BOSCH dishwasher basket. Dimensioned and modeled by me not OEM part. Print 2 parts separatly and clip them together when ready. Remember that the part must be printed from a material resistant to temperatures of +80 C degrees…
I designed new endcaps for the drawer rails of several Siemens, Bosch or Neff dishwashers, as mine kept falling out. Fits on both left and right rails. Simply plug it in and lock it in place with the small part. You may have to hammer it…
It usually takes me two or three tries to get the sandpaper properly aligned with the sanding pad 🙄 A simple alignment jig makes this a bit easier. I designed it for my Bosch delta sander and multitool sanding plate AVZ 93 G. I didn't…
If you have a Bosch Aquastar tankless hot water heater that stops powering the igniter circuit, this part may save the day and a few hundred bucks in replacement parts. To test if this fix will work for you, simply hold a neodymium magnet…
Probably also compatible with Unlimited 6 and 8
Didn't find any model already made for this digital detector so I head up to FreeCad to make my own. Used the Gridfinity plugin and ended up with this 2x4x4. Some considerations: The tolerances are too large, but otherwise it would be not…
A 3D printed replacement ring for the wheel on your Bosch PBD 40 drill press. This new ring includes 3 easily accessible knobs that in my mind is missing on the original design. There are for sure several add-on designs for knobs, but…
Please refer to the original model for overall notes! All credit to the original maker for the design - I just tweaked it for the hardware I have available on hand. The jigs included in the original model file, with the exception of the…
The Bosch PBD40 is a modified version of the handle design for the drill, adapted to the M8 rod with some changes. Print Settings PLA 4 walls 5 bottom and top layers 0.2mm layer height 40% infill density Material list 180mm x 3 M8 Rod 3x…
For me the starter kit charger is all I need, but I wanted to have a fixed place for it. Works good enough for me. Feel free to modify it as needed. The source is on Onshape I don't know what the model is called, it is sometimes…
I found the Bosch 18V Grinder Wall-Mount here, and wanted to see, if this would also be an option for my Kuepper PEG Board. Therefore I merged the Mounting-Points from the GSR12V Drill Holder to this model.
NOTE: This is intended as a TEMPLATE ONLY for using on a mill to produce the adapter plate using a metal plate. I used an 8" X 8" X 1/4" 6061 aluminum plate. The fixed router base that comes with the Bosch 1617 router is identical to the…
Hello i made this model for my bosch GSR 120 Li. The first layer is meant for the without battery and its charger. There is also space for knife. In my case i have fastback there. The second layer (from the bottom) its meant for drills…
This is an adaptation of the French-Cleat Mount I found on thingiverse for my Peg-Board.
(My first remix! Tell me how I did!) Print with supports. Tested and works great.
Düsenhalter für einen Bosch unlimited Staubsauger an einem Skadis Board.
Bosch FlexiClick quad mount Remix from @herbert I chose the spacing so that it can also be attached to a Skadis board.
