Bosch FSN / Mafell rail guide adapter for Wolfcraft mini clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to mount the Wolfcraft mini clamps (part nr 3455100) to Bosch FSN or Mefell rail guides.
- Ocena
- 4,75 / 5
- Polubienia
- 101
- Pobrania
- 614
- Wydruki
- 5
- Wyświetlenia
- 3409
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bosch FSN / Mafell rail guide adapter for Wolfcraft mini clamp
Adapter to mount the Wolfcraft mini clamps (part nr 3455100) to Bosch FSN or Mefell rail guides.
Cause not all 3D-Printers are perfectly calibrate I've attached the FreeCAD project-file where you can adjust some measurements.
Printing
I've used PETG with 55% Infill and at least 5 perimeters **and** an Range-Modifier from 0 to 6mm which adds enough bottom solid layers to fill up the critical range which would likely break first.
Modifying
The FreeCAD file includes a Spreadsheet where you can adjust the params to your needs. Just alter it, export a new STL, print the first 6mm and try if it fits in your rail.
I recommend opening the project in FreeCAD-Linkstage3 which should not break on param-changes.
Credits
This design is inspired from the version teslapunk. Thx for your work!