1 / 5
Universal cordless Drill Holder/Mount (Makita, DeWalt, Bosch, Festool ...) — zdjęcie 1
1 / 5

Universal cordless Drill Holder/Mount (Makita, DeWalt, Bosch, Festool ...)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A universal Holder or mount for cordless Drills, like Makita, DeWalt, Bosch, Festool, Milwaukee, ...

Ocena
4,88 / 5
Polubienia
7471
Pobrania
22 554
Wydruki
149
Wyświetlenia
100 150
Oceny
142

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course.

The following Makita tools have been tested so far in the 40mm version:

The 35mm version fits good for:

The wide version fits:

Smaller tools will probably better fit in the smaller holder with a 35mm cut-out. If someone needs a different measurement, feel free to leave a comment, I'll see if I can implement this.

Printing

Very easy, no supports needed if printed standing. I used PETG for my prints and three walls with 20% infill. This is very solid. If you want, you can print it with 100% infill and get it even stiffer. But you will need ~220g of filament for this. ;)

Update 04.05.2023

I've added another design for the holder, based on the idea of @mnemic. I has the same sizes as the other, but saves even more filament.

Update 06.10.2023

I've added a wider version of the holder, for Tools like the DWT700 or DWT701. This version is identical to the 40mm default version. Only difference is, that that the inner width is 81mm instead of 70mm.

* = Amazon Affiliate Links
** = Information from users who printed the models.

Tagi