P
PrintablesRareTomo
Dewalt Router Dust Extractor
Remix, to have the hose attach horizontally
- Pobrania
- 110
- Polubienia
- 15
- Ocena
- 0
Wyniki wyszukiwania: dewalt
Liczymy pasujące modele…
P
Printables21QualityLemons
Modified Gridfinity Holder for Small DeWalt Drill Bits
I have been having a field day organizing my tool chest drawers with gridfinity, and I had been deliberating over how to organize my drill bits for quite a while. The tool chest I have only has about 50 mm vertical clearance in the…
- Pobrania
- 33
- Polubienia
- 9
- Ocena
- 0
P
Printables
DCB112 Battery Charger (Third Party DeWalt 20v) Wall Mount
I had a side project needing a 20v source at a time when name brand chargers were unavailable except at scalper prices. The Elefly DCB112 solved the charging need very well for $20. But annoyingly and surprisingly it doesn't have a built…
P
Printables
20V Dewalt Battery Connector with Over-Discharge Protection
This 20V Dewalt battery connector includes an integrated over-discharge protection module that prevents the battery voltage from dropping too low. This protection circuit is rated up to 20amps and the cutoff voltage when the battery…
P
Printables
Dewalt 18V Battery to Dewalt 12V (NiMH) Skin
Dewalt 18V Battery to Dewalt 12V (NiMH) Skin ** you will be over volting your tool ** Extra requirements 2 x 6mm male spade connectors 2 x 6mm long male spade connectors 4 x M3 nuts 4 x M3 10mm socket head bolts 2 x wires 40mm long, 5mm…
P
Printables
Kreg Accu-Cut tracksaw adapter for DeWalt DCS571 Compact Circular Saw
This is a niche use case, but maybe someone will find it useful like me for combining two excellent tools to easily and accurately cut shapes from 6 and 12mm MDF. Guide is a two part clamped adapter that fits around the DCS571 base to…
P
Printables
Dewalt Radio Battery Compartment Latch
A friend had a Dewalt job site radio that was missing the latch for the battery cover panel on the back. This one functions the same as the original. It was printed in PLA+ (which is supposed to be more durable than regular PLA, time will…
P
Printables
Ryobi Orbital sander to DeWalt Shop Vac adapter
An Adapter (44.5 mm inside to 35 mm inside) to connect a Ryobi Orbital sander to a Dewalt Shop Vac. Hopefully, it will work with other setups as well. Print in TPU.
P
Printables
DeWALT Large ToughCase+ divider
Clone of the original divider for large ToughCase (DT70804, DT70839)
P
Printables
DeWALT Battery Caddy / Holder 6-Pack
This DeWalt battery holder is designed for convenient carrying of all batteries to the work site. It is versatile and prints easily, no support is needed, only two M4 screws with nuts from 12mm to 15mm in length are required. Print…
P
Printables
Dewalt Planner Exhaust Adapter for Dust Right
This 3D-printed adapter sleeve is custom-designed for the DeWalt planer exhaust port, providing a perfect fit for seamless integration with the Dust Right dust collection system. Its precise dimensions ensure a secure and airtight…
P
Printables
Dewalt Toughcase Pittsburg Quarter inch Deep Metric Socket Organizer
I frequently use my metric set of ¼" deep sockets and very much dislike the socket rail that Harbor Freight provides, so I made this after being gifted a small set of DeWalt ToughCases filled with driver bits and struck with inspiration.…
P
Printables
OSVAC Adapter für Dewalt Panelsäge
Diesen OSVAC-Adapter für meine Kappsäge Dewalt DWS773 habe ich mir gebaut. Er sollte auch an die DWS774 passen. Gedruckt mit PLA der Fa Geeetech. Den OSVAC Anschluß habe ich von einem anderen Adapter freigestellt, den Rohrbogen aus…
P
Printables
Dewalt DW600 Circle Jig
Dewalt DW600 Circle Jig Circle jig for Dewalt DW600 20 volt router. Block has 3 holes for center nail (or screw) to maximize range. Makes holes from about 10" to 32" in diameter. Varies depending on bit diameter. You will need: 2 - M3 x…
P
Printables
Dewalt DWP 611 router circle buddy
This is a simple model that can be mounted onto the DeWalt router. I have included holes for 6 to 18" holes. The name should not be changed. I am offering this model for personal use only. The orange jig pictured here is the first one I…
P
Printables
Dewalt 20V MAX Cordless Battery Powered Pruner Minimal Wall Mount
This minimalist wall mount holds a Dewalt cordless battery powered pruner. The screws go through the mount point so the tool is secure, can print with petg / pla doesnt matter as long as your screw is into something sturdy.
P
Printables
1/4" hex bit holder for DeWalt drills/drivers w Tool Connect
Remix of @LowellAlleman's excellent bit holder but modified to fit the newer tool bases. Many new Dewalt Tools include a bump out in the base to allow for inserting their Tool Connect tracker which interfered with the original model in…
P
Printables
dewalt battery holder for modumount cart system
this is meant to be mounted on the side of the rail system to save space note unlike most modumount parts this requires a non flanged m5 button head build of materials: M5 x 8mm Button Heads https://amzn.to/4iYzl2C M5 T Nuts…
P
Printables
Dewalt Drill Holders, Wall or Table Mounted
This Dewalt drill mount for wall or under counter has proven to be an easy to mount and super convenient to use. Fits models DCD785 DCD796 DC720 Print in PLA at 50% infill for best durability Print in PETG at 25% infill to get it near…
P
Printables
Dewalt/Craftsman TSTAK FatMax Versastack - organiser "side bins"
Update April-26: Thanks to @WK_0bjkt_4142451 for highlighting that some of the newer boxes have additional tabs that prevent these holders from working. Please see his comments for details. v2 update : Improvements to have a tighter fit…
P
Printables
DeWalt Magnetic Bit and Fastener Holder (ToolConnect versions)
Liked the idea of a magnetic holder for screws, nuts, bolts, and bits, but the initial models I printed were both too small and did not fit well with the contours on the side of my DeWalt DCF845 driver (ToolConnect model). So remixed this…
P
Printables
Dewalt Miter Stand Brackets - Slatwall Mount
UPDATE: 4 June 2026 - Decided to revisit the design and created a slim version while still ensuring strength. This provides a way to secure the Miter Saw, using the (DW7231) Miter Saw Stand Tool Mounting Brackets, to the slatwall. Secure…
P
Printables
Drill, baby battery latch, for DeWALT
Somebody dropped off some DeWALT cordless drills. While remanufacturing the batteries, it was apparent some of the latches were broken. Rather than buy new battery packs, it was a simple matter to replace the cells and print these…
P
Printables
Slatwall DeWALT 18GA Brad Nailer Hanger
Like the rest of the Slatwall models I am releasing with the ‘ hookhybridslatwall ’ tag, this hanger for a DeWALT 18GA Brad Nailer clicks together with a couple cheap 4-inch metal hooks to avoid having a printed plastic part in the key…
P
Printables
Dewalt battery holder
Dewalt battery holder: All of these 3d models was tested and checked, works and fitted very well, tested and remodeled couple of time to be perfect flat with 3mm hole flat with 6mm cone hole angular 3mm hole angular 6mm cone hole 3mm hole…
P
Printables
Dewalt DW735 Planer rear table latch V4
Beefed up a little bit, added a bit of length for machines that have a custom outlet and added a recess for screw head
P
Printables
DeWalt DW735 planer: cable and outfeed table holder
A combined wire manager and outfeed table holder for the DeWalt DW725 planer. Hardware: (4) M5x12 bolts (2) M5x20 bolts
P
Printables
DDD Dewalt Grabo lifters DCE592B vacuum clamping system
This project provides the models for a printable vacuum clamping system utilizing the Dewalt Grabo DCE592B lifters. All fittings are ¼" push connect lines and ¼" NPT thread. BOM Dewalt Grabo DCE592B lifter Minwax Polycrylic sealant 1/16"…
P
Printables
Dewalt Battery Holder French Cleat
Integrated french cleat mount for the battery holder to be used with ¾" french cleat organization systems. Model is the same height as the original so should fit with any normal spacing french cleats. Printed in the vertical orientation…
P
Printables
Dewalt table saw dust collector
Dewalt overhead dust collector to attach to the riving knife. It works more efficiently than the supplied collector because it sucks from the front of the blade which is the direction the sawdust is thrown. Used in conjunction with 65 to…
P
Printables
Dewalt ToughSystem Drawers leg retention
I made myself a sliding shelves, but Dewalt box slides on top of it. That's why I made this leg holder which holds ToughSystem box on it. There are two variants, hidden and with the lip. Lip version helps you to make box flush with the…
P
Printables
base for DeWalt DCW600 D26200
Alternative base for DeWalt DCW600 and D26200 milling machines. I made this base so that I wouldn't have to screw the original base onto the milling table every time I wanted to use the milling machine on the table. Cutting depth…
P
Printables
Dewalt DCBL777 & DCBL772 Stubby Nozzle for 60v Leaf Blowers
A stubby nozzle for the Dewalt DCBL777 & DCBL772 Flexvolt 60v leaf blower. Great for drying a car or cleaning out tight spaces. Print as oriented with at least 3 walls for strength. No supports needed. Also available with a wider slotted…
P
Printables
Dewalt DCBL777 & DCBL772 Stubby Wide / Slotted Nozzle for 60v Leaf Blowers
A stubby nozzle for the Dewalt DCBL777 & DCBL772 Flexvolt 60v leaf blower. Great for drying a car or cleaning out tight spaces. Print as oriented with at least 3 walls for strength. No supports needed. Also available with a round opening…
P
Printables
Dewalt DC115 Charger Wall Control mounting bracket
I've married DC115 plate with pins that fit the DC charger with Wall Control back plate.
P
Printables
Ikea Skadis Dewalt Medium Tough Case Mount
This is a device to attach a Dewalt Medium Tough Case on an Ikea Skadis. It is recommended to glue the Skadis hooks to the main body with some glue. Support material is not required. An infill of 20% is recommended. This object's main web…
P
Printables
Dewalt Orbital Sander - Convert to Disk Sander
Convert DeWalt orbital sander to disk sander. DeWalt Models D26450, D26451, and D26453. Secure to work table with screws through base. Used a nylon strap from a reusable bag or pipe hanger strap to secure the sander with screw holes…
P
Printables
Dewalt DW734 Thickness Planer Dust Port to Festool CT Series Hose Adapter/Reducer
I needed an adapter for my Dewalt DW734 Thickness Planer to work with my Festool CT26 with the CT CYCLONE large particle debris separator. I couldn't find one so I made one, in two parts. Body and an o-ring. Main Body Printed in PETG 15%…
P
Printables
Craftsman VERSASTACK / DeWalt TSTAK Toolbox Tool Inserts
Background: This is a Gridfinity baseplate that fits into the standard depth and deep toolboxes made by Craftsman (Versastack Model No. CMST17830 & Model No. CMST17825) and DeWalt (TSTAK Model No. DWST17807 & Model No. DWST17806). The…
P
Printables
DeWalt XR Battery Transport Case – 4 Slot Organizer
Material: PLA or PETG Layer height: 0.2 mm Infill: 50% Wall/perimeter count: 3–4 walls Top/Bottom layers: 4–5 layers No supports required Brim: optional (recommended for better bed adhesion)
P
Printables
Dewalt DCW600 4" baseplate and rebate fence
Recently I needed to fit a large number of door hinges so designed an adjustable jig (link at end of text) that needed a depth controlled router fence/baseplate. None of the baseplates I could find suited my needs hence this model design.…
P
Printables
Dewalt DW682 Biscuit Joiner Handle- shorter
Shorter handle with improved fillets and attachment
P
Printables
Dewalt 20V Charger DCB1104 openGrid Mount
Included are versions for vertical or horizontal printing. The horizontal model has built-in mouse ears and should be a bit stronger. No slicer supports should be necessary for either version
P
Printables
Supeior DeWalt 6x Battery Caddy
A battery caddy for the DeWalt 20V & Flexvolt battery platform. Easily carry up to 30 pounds of batteries onto the jobsite. Load and unload with ease. Optional accessory trays lets you include up to 54 full size 1/4" driver bits & other…
P
Printables
Dewalt 600 or 611 Palm Router - Makita Track - Robust Model
This robust jig attaches the corded (DWP611) or cordless (DCW600) Dewalt 1.25hp palm router to Makita track rail. Features: A. The router attaches to the jig using the original plate screws. B. I drew the Makita track profile and then…
P
Printables
DeWalt Drill/Driver Mount
Added 15degree tilt, fillets and thickened base for mounting in van
P
Printables
Dewalt/Milwaukee 18-20v Battery Nickel Strip Tab Shaper
Made this to get some clearance from the cell ends and nickel tabs on cordless tool battery packs. Adds some expansion/contraction give also. Made it so it will take 8-10mm wide copper or nickel strip and no longer than 27mm's long. Will…
P
Printables
bits storage for dewalt impact driver DCF892NT tstak
This model is a divider that fits inside the tstak box of dewalts DCF982NT impact driver. Each of the circular divisions is 75mm deep and has a diameter of 30mm, it can hold the inbus bits for this impact driver and could potentially fit…
P
Printables
DeWalt Air Lock Vacuum Drill Shroud
Designed to contain dust from Irwin Speedbor Tri-flute bits and attach to a DeWalt dust extractor. Bits will go through 1-1/2 in material. Should work fine with spade bits or twist drills 3/8 and under.…
P
Printables
DeWalt Toughsystem 2.0 Divider
You can print them laying down or standing up, though laying down are stronger due to layer adhesion. Printed in ASA, 0.3 layer height, 3 perimeters for standing or top/bottom layer for laying down. No need for infill as they will be 100%…
P
Printables
Dewalt TSTAK DWST1-70706 - Drawer Inserts
These are some Inserts for the Dewalt TSTAK Drawers, they sit inside the drawer sections allowing you to put smaller items in, they have lids as well to stop spillage when you carry the drawers on their side. There are options: - Single…
P
Printables
Festool Domino - DeWALT Vac Airlock adapter
Doporučení k tisku: PETG/PLA, 3 perimetry, 15-20% výplň. Při tisku užším koncem na podložce stačí podpěry pouze pro vnitřní malé konektory. Printing recommendations: PETG/PLA, 3 perimeters, 15-20% infill. When printing with the narrow end…
P
Printables
Dewalt Toughsystem 2.0 Nesting Boxes
nesting boxes for the dewalt toughsystem 2.0 organisers. These fit the full width and half width organisers and both sizes of box and allow you to store more things in one organiser.
P
Printables
DeWALT Battery Caddy / Carrier / Holder 6-Pack - Expanded
Remix of XYZ.Thought's nice caddy to make it slightly wider, add a base with some drainage, and stretched the handle designed for convenient carrying of batteries and accessories to the work site. This model is not perfect but functional.…
P
Printables
Strap attachment for DeWalt DCMST561 Trimmer
This Dewalt trimmer is a great tool, but the balance is off. It is very nose heavy, making it awkward and tiring to use... This small design clamp itself tightly on the main shaft with two M4 screws. Insert a small carabiner into the…
P
Printables
Nilfisk aero 26 to dewalt DCW210 Sander
Ideal for the Nilfisk Aero 26 and the Dewalt dcw210 Sander it has gotten me out of a pinch a couple of times I have other versions in the making which I will post when complete please bare with me I am extremely new to cad and self taught…
P
Printables
DeWalt DCW200 Sander Wall Mount for Sy's Peglock system
This is a wall mount for the DeWalt SCW200 20v Sander that uses Sy's Peglock system
P
Printables
Battery Holder – Parkside 20V & DeWalt 18V
Battery Holder – Parkside 20V & DeWalt 18V Practical and compact holder for two batteries, compatible with Parkside 20V and DeWalt 18V batteries. Perfect for workshops, garages, or on-the-go use, keeping your batteries organized and…
P
Printables
DEWALT 20V MAX 2AH Gridfinity Holder + Additional Storage
I got a 2AH battery and needed to make something to hold it in my toolbox. It is already 2 rows wide, so I added in some additional storage for you to forget where you put your bits, too. Looking for the 4AH version? Check here for…
P
Printables
Dewalt table saw dust extractor adapter - 32mm hose
Connect the Dewalt DWE 74xx series table saw dust outlet to standard 32mm ID hose, readily available to buy online. The Dewalt saw comes with an adapter which connects to a much larger hose, this is fine if you buy into the Dewalt…
P
Printables
DeWalt 20V to 12V Multi Power Outlet with Light, USB, Magnetic Base, Tripod Mount
This started out as just a battery powered 12V car accessory outlet that evolved into this finished model. The main printed parts are the main case, handle, and base. Not knowing if extended use pulling several amps would heat up the…
P
Printables
Dewalt Shop Vac Latch
Replacement Latch for a Dewalt 10 Gallon Wet / Dry Shop Vac. Made it because the US affiliate who sells their parts, wanted 45 for the part and 45 for shipping. My Slicer was Saying non manifold edges, but prints great, My inclination is…
P
Printables
Bubble Level Accessory for Dewalt Drills
Please print the main housing out of TPU and the springs in either PETG or ABS. Simply print the housing, remove the support and pop the 4 springs and bubble levels in. Then remove the 2 screws at the back of the drill and install the…
P
Printables
DEWALT 20V MAX 5AH Gridfinity Holder
Well, I needed a different size battery holder yet again. This time, for a DeWalt 5AH 20 Volt battery. It fits with Gridfinity and keeps it in the right space in my drawer. Looking for the 4AH: Creality Link…
P
Printables
DeWalt Stealthsonic vacuum adapter for VEVOR planer.
Simple adapter to connect a DeWalt Stealthsonic vacuum to a VEVOR planer . Thin adhesive foam pad can be added for a tighter fit if needed, but it works properly as it is. A straightforward, practical adapter that gets the job done. ;)
P
Printables
Replacement Latch for Dewalt Wet/Dry Shop Vacuum DXV09P
I've had my vacuum a while now and with the cold, one of the clips finally broke. The factory ones are very sloppy and loose anyway. The one I made is shortened in height slightly to avoid accidental catching on things and reinforced in…
P
Printables
Dewalt Battery Adapter
Just a simple battery adapter for DeWaLT 20v batteries to be used with my Ice Fishing Rig Find assembly instructions HERE Original design by Shop Therapy
P
Printables
DeWALT AKU drill bit holder
Bit holder for various DeWALT AKU drills 6× slots for standard hex bits (6.3 mm) Required: 3× magnets (20 × 6 × 2 mm) Tested with: Prusament PETG Mango Yellow ✅ Print Settings Nozzle: 0.4 mm Layer height: 0.15 mm Infill: 25% Gyroid Pause…
P
Printables
dewalt saw back cuting wear
printed in 100% infill i printed it in petg but i think you can use what fillament you want (needs to handel sun heat in the summer) l allsow made the cuting bord so it throw the woodust harder out in the back of the saw. works perfekt. i…
P
Printables
Drilling Dust Extraction for DeWalt
Since DeWalt doesn't have an affordable drill dust shroud I made one myself. It works with DeWalt vacuums, but an ordinary one would still be fine. The cutout for the drill is 30x30mm. For lower power vacuums you need to make the cutout…
P
Printables
US General / Icon Dewalt Angle Grinder Hutch Mount
DeWalt angle grinder, possible other, hutch mount for a US General / Icon hutch.
P
Printables
DeWalt Sander Grip Bracket
This clip or grip style bracket can be used to turn the DeWalt DCW210 into bench grinder style sander.
P
Printables
DeWalt DW733 planer Dust Port adapter to SHOPVAC (50mm) camlock connector
Using Peter H 's great Camlock design as a basis, I modeled an adapter that nicely fits the DeWalt DW733 dust exhaust port. The adapter is asymmetrical, for optimal flow of the dust / wood chips Wall thicknesses are optimized for a 0,4mm…
P
Printables
Mount for DeWalt DCF510
Printable mount designed to hold the DeWalt DCF510 20v Brushless ratchet when paired with the 2AH battery
P
Printables
DeWalt Battery Holder for Multiboard T-Bolts
This DeWalt Battery Holder is designed to work with Multiboard and Multiboard 20mm T-Bolts . Print using standard Multiboard printing guidance (3 perimeters, 0.2mm layer height, 15% infill, and no supports). Model should print so the…
P
Printables
Absaugung für DEWALT 18V Akku-Kombifräse DCW604NT-XJ / Router DCW604NT-XJ
Das Modell von https://www.printables.com/model/929117-ryobi-router-vacuum-adapter-for-nilfisk-multi-ii-3/files hat mich inspiriert, dieses Konzept auch für die DeWalt DCW604 umzusetzen. Verwendete Hardware 2× Metallstangen Ø 7 mm, ca.…
P
Printables
Dewalt Table Saw to Ridgid Shop Vac Adpater
I made this so that I could collect as much dust as possible from my table saw. I printed it with PLA on my creality years ago and it cracked. Printing with TPU on a more modern Prusa MK4 is a better material to work with. Print with thin…
P
Printables
Wall Mount for DeWalt Vacuum Accessory Bag
These brackets will allow you to mount the accessory bag that comes with your DeWalt Wet/Dry vacuum to your wall. They're not complicated, but I found them useful. The bar fits securely but not tightly within the brackets - it doesn't…
P
Printables
DeWalt D28110 Grinder Top Handle Adapter
My DeWalt D28110 Grinder (discontinued) has only right and left handle positions. This adapter can be attached to the grinder using two existing front screws and allows for a top handle position. See pictures. There are two versions of…
P
Printables
Dewalt multi battery holder (with drill mounts)
I wanted to organize my batteries in an easy way, without measuring the correct distance for each battery. I came up with this idea, so that the batteries are all at an equal distance and easy to mount. If the first holder is horizontal,…
P
Printables
DeWalt Bit Holder - Easy Insert/Remove
This is a simple bit holder for a DeWalt impact driver. I've tested that it fits securely on a DCF885 (the slightly older brushed impact driver) and one of the newer brushless DeWalt impact drivers (I'm not sure of the exact model). If…
P
Printables
DeWalt DCW200 to ShopVac adapter
Adapter to help connect a ShopVac (2.25" OD) to the DeWalt DCW200 and anything else that might use the same connection. It has these little “balls” that should pop in to place, BUT I warn you that these are quite brittle and may snap…
P
Printables
Gridfinity Bin for Dewalt Laser Measure
My Gridfinity 2x1x4 bin for the Dewalt Atomic Laser Measure loaded on it's side.
P
Printables
DeWalt (& 1.25" OD) Vacuum to 1" Conduit adapter
This is a set of 4 simple adapters to connect a DeWalt Handheld Vacuum (or other similar vacuum with a 1.25" outer diameter accessory diameter) to a piece of 1" Schedule 40 PVC Conduit. A simple friction fit will create a (sufficiently)…
P
Printables
DeWalt Tough System Organizer Nested Cups
It's come to my attention that this design is being sold on ebay for way too much money. Please don't buy these for inflated prices. My design is free to use. If you wish to support my work, do so by sharing your makes and your own…
P
Printables
Dewalt Drill DCD996
Designed with precision and purpose in mind, tested for 5 years this adapter allows you to mount your drill to a wall or counter fits in like a hoist and it is tight fit once in place perfect for transport and quick use. For best results…
P
Printables
Dewalt DCF894 Impact wrench mount
This Dewalt DCF894 Impact wrench mount for wall or under counter has proven to be an easy to mount and super convenient to use. Tested and fits Dewalt DCF894 with great precision. - Made to precision, this will hold your drill firmly. -…
P
Printables
DeWalt DWE7491 Table Saw Dust Port Adapter to DXV09P Shop Vac
I couldn’t find an STL to connect my DeWalt DWE7491 table saw to my DeWalt DXV09P shop vac, so I made one. This adapter helps improve dust collection by creating a solid connection between the saw and vacuum hose. Designed while learning…
P
Printables
DeWalt DWS780 Miter Saw Dust Port Adapter to DXV09P Shop Vac
I couldn’t find an STL to connect my DeWalt DWS780 miter saw to my DeWalt DXV09P shop vac, so I made one. This adapter is designed to improve dust collection and provide a snug fit between the saw and vacuum hose. It was one of my first…
P
Printables
Dewalt Brad Nailer Vertical Mount
This is a ceiling/overhead mount for the DeWalt DWFP12233 Brad Nailer. The mount allows you to securely store your nailer off the ground and out of the way. Simply insert the nailer into the mount, and it will settle into a snug, secure…
P
Printables
HSW DeWalt 12v Drill/Tool Holder
I was playing with a friends' 3D scanner and my first terrible scan was my DeWalt 12v Screwdriver. After I made my Honeycomb Storage Wall I held off printing one of the other drill mounts solely because I had a 3D scan and wanted to make…
P
Printables
Dewalt Vacuum Replacement Filter Holder
I lost my filter holder to this vacuum, so instead of buying the OEM part and waiting for it to ship, I designed and printed it myself! Be warned that this has a tight fit and requires a high quality printer (like the core one) to print.…
P
Printables
Grabo Dewalt Convertion clip
Conversion clips to attach Grabo Slender Seal to the New Dewalt Grabo lifter 3 wall PLA tough + Supports needed
P
Printables
Dewalt DC515 guard
Simple wear protection / guard designed for the nozzle of the DeWalt DC515 Handheld Vacuum . This flexible cover helps reduce wear on both the vacuum tip and surfaces during use, especially on delicate materials. It slides over the nozzle…