Dewalt DW735 to 4" 90° dust collection adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 90° degree transition from the Dewalt DW735 dust collection port to 4".
- Ocena
- 5 / 5
- Polubienia
- 93
- Pobrania
- 985
- Wydruki
- 3
- Wyświetlenia
- 6592
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
A 90° degree transition from the Dewalt DW735 dust collection port to 4". Here I'm using a Rockler quick connect but it'll also work fine with a 4" flex hose and it may work with various other fittings but I haven't verified this. The Fusion file is included so you can modify it to fit your configuration.
Print instructions
Category: Tools Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 15%
Notes:
Printed in PETG with a 0.6 nozzle and four perimeters for strength. Recommend printing in the orientation provided with build plate supports as needed.
I needed to use 0.2 layer heights with the 0.6 nozzle to get all the inner and outer perimeters to adhere properly (and not be complete overhangs). There's a lot of bridging so if your printer is suspect in this area slice the top portion into a separate model and run some test prints of it.