Liczymy pasujące modele…
A 90° degree transition from the Dewalt DW735 dust collection port to 4". Here I'm using a Rockler quick connect but it'll also work fine with a 4" flex hose and it may work with various other fittings but I haven't verified this. The…
Sorry, but due to the license being completely disregarded and copies being sold, I've removed the STL's. However, I do have it for sale on my official shop (along with 4" versions) https://www.etsy.com/shop/LayneAndSonWW
I Increased the depth of the screw head counterbore by 6mm and the diameter of both the counterbore and the through hole by about 0.5mm. This lets the factory bolt bottom out on the shoulder as it should (i.e. don't have to worry about…
This is a 90-deg elbow that fits onto the exhaust port of a Dewalt DW735 Planer and allows you connect to a standard shop-vac hose. It can easily be printed with no supports and has tapered ends for a snug fit on both ends.
A collection on well fitting vacuum hose adapters for the Dewalt DW735 planer. I have this planer and designed the adapters to provide a snug fit similar to that of the factor adapter. Adapters that have a bend have 4 retaining position…
A dust port compatible with the Dewalt DW735 planer.
This adapter snaps onto the output dust port on the DW 735 planer and connects to a vacuum hose with the output angled up and sideways so that the hose doesn't drape down over the outfeeding workpiece. The OpenSCAD file is parameterized…
Description The Dewalt DW735 generates such a heavy chipload that the manual recommends it NOT be hooked to a ShopVac. This set of models lets you convert a 20 gal. Rubbermaid Roughneck refuse container into a chip and dust holder. Parts…
Simple funnel to connect Dewalt dw735 to 35 mm/ 40 mm shopvac. Outer diameter is 40 mm Inner diameter is 35 mm PETG recomended, or as you wish
Simple handle replacement for the DeWalt DW735 Planer/Thicknesser. Few others around to download but couldn't find one that “felt” right so I designed my own! Uses stock bolt, I do recommend a washer between the handle and the round body,…
Replacement dust port adapter for the Dewalt DW735 thickness planer. This has a sturdier design around the fixed pin, per the original model, vs. the OEM adapter which is prone to breaking. It is made to accept 2.5" dust hoses. The…
A replacement cap for the posts on a Dewalt DW735 thickness planer. There are two versions: One is a close replica of the original part with a domed top. This one will require support in the center section. The other is slightly different…
This is an adapter to connect my DW735 planer to my shop dust collection system. The supplied adapter with the DW735 has the collection system hose in line with wood exiting the planer. This adapter permits use of a right angle hose…
Upgrade your DeWalt planer with this space-saving, ergonomic adjustment knob. Designed for tighter workspaces, it offers a lower profile without sacrificing grip or control. The contoured handle improves comfort and precision, making…
A combined wire manager and outfeed table holder for the DeWalt DW725 planer. Hardware: (4) M5x12 bolts (2) M5x20 bolts
This is a replacement for the stock dust collection adapter for the Dewalt DW735 thickness planer. It is designed to work with Rockler's Dust Right 4" hose system. It features a reinforced locking groove, so it won't crack like the OEM…
Without support the hose falls on the the outfeed table and gets in the way of the wood being fed out of the thicknesser. I have designed mine to fit on the RHS of the machine using existing screw holes. You need to source 2 screws 10mm…
This is a 4" hose adapter for the DeWalt DW735 13" planer. It directs the hose 45 degrees to the left or right of the planer to keep the hose out of the way. I wend with a 45 degree angle to avoid needing supports. There is a left and…
This is a straight adapter to connect a 36mm "large size" Festool extractor hose to a DW735 planer directly, replacing the factory hose adapter by using the same spring-pin attachment as the factory adapter. Output is straight, just like…
This is an angled adapter to connect a 36mm "large size" Festool extractor hose to a DW735 planer directly, replacing the factory hose adapter by using the same spring-pin attachment as the factory adapter. Output is angled down and out,…
Slip-on fit for DW735 planner for dust collection with 3/8 x 1/4 magnets and 2.5-inch anti-static hose
Update: I have given up on this model 👎. See my own alternative solution here . There is too much stress on the slot making it fragile and easy to break when printed in PLA or PETG. I can see the use of these angled designs if you have…
This design, while not without its imperfections, was the result of a rapid, collaborative effort, completed in approximately 30 minutes, and was necessitated by the failure of the existing crank wheel. The components utilized include…
Beefed up a little bit, added a bit of length for machines that have a custom outlet and added a recess for screw head
remixed based on Fuzzino's file https://www.printables.com/model/1279036-dewalt-dw735-bag-adapter-stand-mount/files
Replacement dust port adapter for the Dewalt DW735 thickness planer. This has a sturdier design around the fixed pin. It is made to accept 100mm dust hoses. No threading - use a clamp. My first test using PLA actually fitted (!) so I'm…
Dewalt Planer Exhaust Adapter (DW735) to Dust Extractor / Shop vacuum Designed with crush ribs to create slight interference fit between planer exhaust and adapter. Designed to connect to 90 degree elbow on Home Depot Dustopper.
Beefed up a little bit, added a bit of length for machines that have a custom outlet and added a recess for screw head
A combined wire manager and outfeed table holder for the DeWalt DW725 planer. Hardware: (4) M5x12 bolts (2) M5x20 bolts
Sorry, but due to the license being completely disregarded and copies being sold, I've removed the STL's. However, I do have it for sale on my official shop (along with 4" versions) https://www.etsy.com/shop/LayneAndSonWW
Product Description This download contains the latest updates for our aftermarket upgrade for the DeWALT DW735 planer , designed to modify the machine’s factory dust extraction method to an over-the-top dust collection system . Now…
I needed a way to keep the bag and dust hose in place on my DW735s mobile stand. No one had a 2.5 inch wall mount with an angled 4 inch bag adapter, not without needing several different items anyway. This will take 2.5 inch dust…
Every commercially available DW735 is just a DRO with a customized bracket to fit with DW735. So here is a bracket I designed that should work with this Generic DRO You will also need Assorted Metric Screw and Nuts . Installation Steps:…
This part replaces the stock Dewalt 735 mount with one that includes both a 45-degree elbow and a 100mm magnetic dust collection mount. The upgrade solves two problems. First, the dust port is directly above the outfeed table which can…
I wanted vertical dust collection for my DW735, but didn't want to pay whatever silly money people are asking for their model. It may not be perfect, but its free. I included the fusion file, please feel free to edit and do whatever you…
DW735 height adjustment handle shortened to the minimum length supported by the factory shouldered bolt.
A coupler to connect a DeWalt DW735 planer to a shopvac hose (2 1/2 inch). It is a friction fit so I made it a bit thicker so you can get a grip on it without worrying about cracking it.
You break the handle off the side lugging the thing around? I did.
