1 / 2
DW735 Generic Digital Readout Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do you want one of those fancy digital thickness readouts for your DW735, but don't want to pay the price? I got you.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Every commercially available DW735 is just a DRO with a customized bracket to fit with DW735. So here is a bracket I designed that should work with this Generic DRO
You will also need Assorted Metric Screw and Nuts.
Installation Steps:
- Screw in the top and bottom brackets using M3 Screws
- Use original screws to screw the bottom bracket to the base
- Screw in the carriage bracket to the carriage using M3 screws and a bunch of washers to tighten
- Screw the carriage to the body using M4 screws and the washers
- To calibrate, raise the planer almost all the way up and remove the stopper screw. This will let you lower the planer all the way down and set it as 0
