DW735 Planer to Festool 36mm Hose - Angled Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an angled adapter to connect a 36mm "large size" Festool extractor hose to a DW735 planer directly.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an angled adapter to connect a 36mm "large size" Festool extractor hose to a DW735 planer directly, replacing the factory hose adapter by using the same spring-pin attachment as the factory adapter. Output is angled down and out, away from the work path.
Includes extra support by re-using an existing screw on the machine - simply remove the Phillips head screw below and to the right of the dust port, rotate the adapter until it locks into place and then replace the screw.
Use this adapter if you want to direct the hose downwards to the side, out of the work path. If you are looking for a version that goes straight out the back like the factory adapter, I published one of those here.
I printed my version in Bambu PLA-CF with 3 walls and 100% Rectilinear infill.