1 / 2
Dewalt DW735 to 4" 90° dust collection adapter — image 1
1 / 2

Dewalt DW735 to 4" 90° dust collection adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 90° degree transition from the Dewalt DW735 dust collection port to 4".

Rating
5 / 5
Likes
93
Downloads
985
Makes
3
Views
6,592
Reviews
3

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

A 90° degree transition from the Dewalt DW735 dust collection port to 4". Here I'm using a Rockler quick connect but it'll also work fine with a 4" flex hose and it may work with various other fittings but I haven't verified this. The Fusion file is included so you can modify it to fit your configuration.

Print instructions

Category: Tools Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: No

Supports: Yes

Resolution: 0.2

Infill: 15%

Notes:

Printed in PETG with a 0.6 nozzle and four perimeters for strength. Recommend printing in the orientation provided with build plate supports as needed.

I needed to use 0.2 layer heights with the 0.6 nozzle to get all the inner and outer perimeters to adhere properly (and not be complete overhangs). There's a lot of bridging so if your printer is suspect in this area slice the top portion into a separate model and run some test prints of it.

Tags