Dewalt DWE7492 vacuum hose connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make a part to connect a spiral vacuum hose to my Dewalt DWE7492 table saw
- Ocena
- 0 / 5
- Polubienia
- 53
- Pobrania
- 260
- Wydruki
- 0
- Wyświetlenia
- 2719
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was needing to connect a vacuum hose to my table saw to extract wood chips and dust
I designed the part in Fusion 360 with a cone to enter the table saw exits and an internal screw thread for the vacuum hose. After several tests I found the right custom thread parameters following Fusion 360 knowledge base article → https://knowledge.autodesk.com/fr/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/FRA/Custom-Threads-in-Fusion-360.html
Printed in Prusament PETG with 0.20mm layer heigh, 3 perimeters and supports for the 28 first layers to support 1st screw pitch (Easy to set-up with PrusaSlicer)
On top of .stl files I uploaded .f3d one so you can modify the design and adapt it to your needs
As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes
You can also look at other Dewalt accessories I designed and 3D printed
Enjoy
If you like this model, take a look also at my other designs
EDIT 13/02/2023
As requested in a comment, I attached as well the xml file I created for Custom Threads. The thread I used for the connector is the 40 x 5.5