Bosch L-Boxx Mount for Transport Dolly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Mount for mounting the Bosch L-Boxx System to a genuine transport dolly
- Ocena
- 5 / 5
- Polubienia
- 88
- Pobrania
- 765
- Wydruki
- 6
- Wyświetlenia
- 2843
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
The Bosch L-Boxx Mount is used for installing on a transport dolly and securing the Bosch L-Boxx Storage System on top of it.
Print Settings:
Perimeter: 4 layers (0.4mm Nozzle)
Infill: 40% Gyroid
Layer Height: 0.2mm
Support: Support on build plate
Material: PETG or PLA
Printing Orientation: See attached screenshot in PrusaSlicer
Installation:
1. Use an L-Boxx to hook up the two mounts and put it onto a plate.
2. Use a fine marker to mark the screw holes of the mount.
3. Drive a self-tapping screw (M3 self tapping screws) into the hole with the mount in place.
Others:
A fusion360 archive file and a step file are available for any remix or adjustment required.
Feel free to ask if there is any problem or question.