Bosch L-Boxx Mount for Transport Dolly
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Mount for mounting the Bosch L-Boxx System to a genuine transport dolly
- Rating
- 5 / 5
- Likes
- 88
- Downloads
- 764
- Makes
- 6
- Views
- 2,838
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The Bosch L-Boxx Mount is used for installing on a transport dolly and securing the Bosch L-Boxx Storage System on top of it.
Print Settings:
Perimeter: 4 layers (0.4mm Nozzle)
Infill: 40% Gyroid
Layer Height: 0.2mm
Support: Support on build plate
Material: PETG or PLA
Printing Orientation: See attached screenshot in PrusaSlicer
Installation:
1. Use an L-Boxx to hook up the two mounts and put it onto a plate.
2. Use a fine marker to mark the screw holes of the mount.
3. Drive a self-tapping screw (M3 self tapping screws) into the hole with the mount in place.
Others:
A fusion360 archive file and a step file are available for any remix or adjustment required.
Feel free to ask if there is any problem or question.