1 / 2
Bosch Green DIY 18V Battery Mount (Power for all Alliance)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery mount with retainer for the Bosch Green batteries, this is the DIY series from Bosch.
- Ocena
- 4,933 / 5
- Polubienia
- 98
- Pobrania
- 1309
- Wydruki
- 20
- Wyświetlenia
- 3969
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 20) (Komentarze: 22)Remiksy (5)Kolekcje (145)Powiązane
Battery mount with retainer for the Bosch Green batteries, this is the DIY series from Bosch. This mount does also fits other batteries in the Power For All alliance series.
Reupload from Thingiverse.
Printing instructions:
Layer height: 0.2 - 0.3 mm
Perimeters: 3 or more
Infill: 15% or more
Material: PLA
Optional settings:
When the orientation is flat it is necessary to use supports, due to the rounded edges this is in my opinion the best way to print this.