1 / 8
Bosch Electric Drill PSR 18 LI-2 Holder for (Honeycomb Storage Wall)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for Bosch Electric Drill/Screwdriver PSR 18 LI-2 for 'Honeycomb Storage Wall'
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 677
- Wydruki
- 8
- Wyświetlenia
- 2777
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 8) (Komentarze: 9)Remiksy (2)Kolekcje (181)Powiązane
Stylish holder for Bosch electric drill/screwdriver PSR 18 LI-2.
### Update 19.09.23 - Version 2
- Increased thickness for more longevity
- No more screws and nuts are required, only two empty inserts (attached to this model)
- Additional hooks in the front so the drill can't slide down.
Printing recommendations:
- Print it laying flat (see screenshot of Slicer) for increased lateral strength
- Enable supports
----------
Version 1
What is needed?
- 1x print file
- 2x M3 Nuts
- 2x M3 screws (M3x6-M3x12)
- 2x ‘insert-with-M3’ (See original Honeycomp Storage Wall)
How to print?
- Print with the two hooks pointing up (I haven't had any problems with layer separation)
- Make it strong enough (4 Shells+)
- No brim, no supports needed.