Bosch Professional 18V Battery Adaptor Adapter Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bosch Professional 18V Battery Adaptor Adapter Module
- Ocena
- 4,6 / 5
- Polubienia
- 236
- Pobrania
- 1968
- Wydruki
- 9
- Wyświetlenia
- 13 529
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This battery adapter is used in multiple of my other designs.
For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/
For Milwaukee M18 Batteries, see my design here: https://www.printables.com/model/1391256/
Some people have made the metal contacts with sheet metal tabs or some random connector pins, I have taken a different route here. I use two thin shim washers as contacts in this design.
The washer must not be thicker than 0.8mm, because the original contact is also only 0.8mm and I do not want to stretch the spring contacts in the battery more. In this design I used 0.5mm thick shim washers, but changing the dimension in CAD should not be a big problem.
The wires can be soldered to the contact shim washers first.
Required Material
- Designed to fit two thin DIN 988 shim washers 12x18x0.5mm (German: Passscheibe)
- The two contact modules can be secured with M3x10 screws (thread directly in PLA)
1x Power Switch:
Switch size 21 x 15mm
Front panels cutout 19.4 x 13 mm
4x Countersunk Screw:
M4 x 16mm
Designed in Onshape