Bosch Professional 18V Battery Adaptor Adapter Module
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.30 – €5.26 net (excluding VAT)
For file: Bosch Battery Mount - BoschMount v3_0.2mm_PLA_MK3S_4h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.78 excluding VAT (range midpoint).
- Weight reported by the author
- 61 g
- Print time reported by the author
- 4.72 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Bosch Professional 18V Battery Adaptor Adapter Module
- Rating
- 4.6 / 5
- Likes
- 237
- Downloads
- 1,976
- Makes
- 9
- Views
- 13,577
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This battery adapter is used in multiple of my other designs.
For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/
For Milwaukee M18 Batteries, see my design here: https://www.printables.com/model/1391256/
Some people have made the metal contacts with sheet metal tabs or some random connector pins, I have taken a different route here. I use two thin shim washers as contacts in this design.
The washer must not be thicker than 0.8mm, because the original contact is also only 0.8mm and I do not want to stretch the spring contacts in the battery more. In this design I used 0.5mm thick shim washers, but changing the dimension in CAD should not be a big problem.
The wires can be soldered to the contact shim washers first.
Required Material
- Designed to fit two thin DIN 988 shim washers 12x18x0.5mm (German: Passscheibe)
- The two contact modules can be secured with M3x10 screws (thread directly in PLA)
1x Power Switch:
Switch size 21 x 15mm
Front panels cutout 19.4 x 13 mm
4x Countersunk Screw:
M4 x 16mm
Designed in Onshape