1 / 9
Sanding Blocks 125mm and 150mm Sanding Disks — zdjęcie 1
1 / 9

Sanding Blocks 125mm and 150mm Sanding Disks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

6,41 € – 7,84 € netto (bez VAT)

Dla pliku: Cale a poncer Diam 125mm v2_0.2mm_3P_PLA_YELLOW_BLACK_215_MINI_6h48m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 7,13 € netto (środek widełek).

Masa podana przez autora
96 g
Czas druku podany przez autora
6,8 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Design and 3D print of sanding blocks for 125mm and 150mm diameter sanding disks

Ocena
5 / 5
Polubienia
130
Pobrania
672
Wydruki
3
Wyświetlenia
3251
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

To complete my Mirka DEROS sander and don't have to take it out for small and quick jobs, I designed and 3D printed sanding blocks for the 125mm and 150mm sanding disks I use

Design

Design from Fusion 360 is quite simple. I started from the profile of the blocks and use “Revolution” feature

For the handle I reproduce more or less the one from my Mirka sander

The diameter of the base is a little smaller than the pad one (-1mm). So when sanding corners there is no risk to damage the part with the block more the sanding pad will be easier to center

Both 125mm and 150mm blocks use same profile. Just diameter of the bottom surface changes

 

Printing instructions

Printed in PLA Prusament Pineapple Yellow and Jet Black to look like Mirka colors (Yellow and Black)

I used “Fuzzy Skin” feature from PursaSlicer on the black part to have more grip on the handle

It's sliced using PrusaSlicer using

  • 0,20mm layer height
  • 3 perimeters
  • 10% infill / Gyroid
  • Color change M600 (from Yellow to Black) at 30mm height
  • Fuzzy Skin activated at 30mm height (Synchronized with color change)
  • Printing time 6H48 for the 125mm and 8H13 for the 150mm

It can be printed faster with 0,25mm layer height. But the surface will be less smooth, mainly for the top of the handle

You can use “Variable layer height” option from PrusaSlicer, that I didn't used for this model

 

Material

Best way is to don't stick directly sanding disk to the block. Better to use interface, so sanding disk can be changed easily from the blocks

1st option: Use protective pads like the ones used with the orbital sander. Stick it to the block using double side adhesive. Sanding disk can be easily changed. That's the one I used 

2nd option: Use of self adhesive hook and loop tapes you can find easily from internet to attache directly sanding disks. Stick only the Hook on the block

 

On top of .stl and .3mf files, I uploaded Fusion 360 .f3d file so you can modify the design and adapt it to your needs

As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes

You can also look at other Mirka DEROS accessories I designed and 3D printed

Enjoy

 

If you like this model, take a look also at my other designs

 

Tagi