Sanding Blocks 125mm and 150mm Sanding Disks
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.41 – €7.84 net (excluding VAT)
For file: Cale a poncer Diam 125mm v2_0.2mm_3P_PLA_YELLOW_BLACK_215_MINI_6h48m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.13 excluding VAT (range midpoint).
- Weight reported by the author
- 96 g
- Print time reported by the author
- 6.8 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Design and 3D print of sanding blocks for 125mm and 150mm diameter sanding disks
- Rating
- 5 / 5
- Likes
- 130
- Downloads
- 672
- Makes
- 3
- Views
- 3,251
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To complete my Mirka DEROS sander and don't have to take it out for small and quick jobs, I designed and 3D printed sanding blocks for the 125mm and 150mm sanding disks I use
Design
Design from Fusion 360 is quite simple. I started from the profile of the blocks and use “Revolution” feature

For the handle I reproduce more or less the one from my Mirka sander
The diameter of the base is a little smaller than the pad one (-1mm). So when sanding corners there is no risk to damage the part with the block more the sanding pad will be easier to center
Both 125mm and 150mm blocks use same profile. Just diameter of the bottom surface changes

Printing instructions
Printed in PLA Prusament Pineapple Yellow and Jet Black to look like Mirka colors (Yellow and Black)
I used “Fuzzy Skin” feature from PursaSlicer on the black part to have more grip on the handle

It's sliced using PrusaSlicer using
- 0,20mm layer height
- 3 perimeters
- 10% infill / Gyroid
- Color change M600 (from Yellow to Black) at 30mm height
- Fuzzy Skin activated at 30mm height (Synchronized with color change)
- Printing time 6H48 for the 125mm and 8H13 for the 150mm
It can be printed faster with 0,25mm layer height. But the surface will be less smooth, mainly for the top of the handle
You can use “Variable layer height” option from PrusaSlicer, that I didn't used for this model
Material
Best way is to don't stick directly sanding disk to the block. Better to use interface, so sanding disk can be changed easily from the blocks
1st option: Use protective pads like the ones used with the orbital sander. Stick it to the block using double side adhesive. Sanding disk can be easily changed. That's the one I used

2nd option: Use of self adhesive hook and loop tapes you can find easily from internet to attache directly sanding disks. Stick only the Hook on the block

On top of .stl and .3mf files, I uploaded Fusion 360 .f3d file so you can modify the design and adapt it to your needs
As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes
You can also look at other Mirka DEROS accessories I designed and 3D printed
Enjoy
If you like this model, take a look also at my other designs