1 / 10
Makita to Festool Vacuum Adapter DRT50 RT0700 — zdjęcie 1
1 / 10

Makita to Festool Vacuum Adapter DRT50 RT0700

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

So I got this very handy Makita DRT50, but the Festool vacuum doesn't fit to it without an adapter. Here it is :-)

Ocena
4 / 5
Polubienia
42
Pobrania
635
Wydruki
2
Wyświetlenia
1877
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Update January 2025

Just a minor update after some feedbacks about a loose fit. 
It's easy to swap on purpose, but maybe it really was a little to dependent on the seam the old printer made. 😅

Anyways here's a slightly tighter version with 0,2 mm less gap on the Makita side.
It's the V2, old one is still available as V1. 🖖

_____________

So I got this very handy Makita DRT50 but the Festool vacuum doesn't fit to it without an adapter.

I coudn't find printing files when researching some so as always we just have to make some ourselves.

The adapter slides on the inside an outside over the Makita exhaust. The Festool vacuum goes inside the other end of the adapter. Please make sure your Festool vacuum has an end diameter of 36 mm as it is here in the pictures.

As far as I found out the Makita exhaust for the DRT50 and RT0700 should be the same and so the adapter works for both.

But feel free to ask if you need any help.

Here's the article about it's creation (or straight at heise) and also a linked video on how to do it yourself.

 

 

 

Print Settings

Printer Brand:

Anycubic

Printer: 

i3 Mega

Rafts:

No

Supports: 

Yes

Resolution:

0.2 mm

Infill: 

25%

Filament: das Filament PLA Orange


 

Notes:

 

I chose those settings:
0.2 mm layers (with adaptive layers)

25% infill

3 walls

I recommend supports for the inside elements

 

 

 

 

Category: Parts

Tagi