1 / 2
LENOVO LEGION 230W charger power adapter supply hanger holder — zdjęcie 1
1 / 2

LENOVO LEGION 230W charger power adapter supply hanger holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

3,52 € – 4,31 € netto (bez VAT)

Dla pliku: Lenovo 230W_0.3mm_ASA_MK3S_2h19m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 3,91 € netto (środek widełek).

Masa podana przez autora
39 g
Czas druku podany przez autora
2,32 godz.
Materiał u źródła
ASA
Materiał wyceny
ASA
Drukarka wyceny
Bambu Lab X1 Carbon - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

My LENOVO LEGION 5 laptop spends most of time on the desk. So, I had to find the way to hang its charger under the…

Ocena
5 / 5
Polubienia
18
Pobrania
159
Wydruki
1
Wyświetlenia
941
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My LENOVO LEGION 5 laptop spends most of time on the desk. So, I had to find the way to hang its charger under the desk top, that it doesn't take up additional space. That is the result, a simple hanger for LENOVO 230W charger (type: ADL230SDC3A, the one with the rounded ends!).

You may also check my another design of power brick hanger for HP 200W:

https://www.thingiverse.com/thing:4734867

as well as HP 150W:

https://www.thingiverse.com/thing:4713681

Due to the operating temperatures of the power supply, exceeding the durability of PLA, I recommend using ASA, eventually PETG!

Print Settings

Printer Brand: Prusa

Printer:  I3 MK3S

Rafts: No

Supports:  No

Resolution: 0,3

Infill: 20%

Filament: Plast-Spaw ASA, PETG 
 

Notes: It is really simple to print. No supports. Mount it with cone head, 3mm wood screws.

Tagi