Liczymy pasujące modele…
UPDATE! GET THE NEW VERSION HERE -Charger Cable Organizer 2nd edition- Due to many not reading the print instructions i've now put the instructions on top of the descriptions. PLEASE READ BEFORE PRINTING!! " Print instructions: Version 1…
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
This is a mockup of the TP4056 USB C Battery Charger Li-ion Module for further case designs sizes and dimensions have been measured carefully If this helped you, please leave a like! That's my reward and payment! 👍 I ll be happy to get…
I had a side project needing a 20v source at a time when name brand chargers were unavailable except at scalper prices. The Elefly DCB112 solved the charging need very well for $20. But annoyingly and surprisingly it doesn't have a built…
The holder is for smartphones with width = 7.3 mm and thickness = 9 mm, such as the Huawei P30 Pro. The bracket can be attached to standard connectors. The variants differ in the position of the connection surfaces. Since the Brodit…
UPDATE: Updated to include a version for Juniper Model Ys and Highland Model 3s. I don't have either of those so I tested this on a rubber mat designed for those vehicles. ORIGINAL The camera bump outs on my iPhone14 were preventing the…
3s 18650 Battery Tray for QX7 Print Settings Resolution: .12 Infill: 100 **Filament:** Overture PLA Notes: I used the metal battery tabs from the stock AA qx7 battery tray to make this 18650 holder. In order to use this tray for both…
Hello everyone! As promised, I've finally designed and tested a new stand for Kiwi E-cigarette with holes for suit the cable for charge it! The model is very simple and minimalist, with compact dimension for tiny spaces. For insert the…
A wall mount for a Panasonic EY0L11 charger that, for some reason, isn't wall mountable as standard. The mount is split into two files for easier printing, a baseplate and the clamping band that goes over the battery charger. No supports…
OnePlus Smart Watch 2. Charger Stand, designed around an after market charger from Amazon, https://amzn.eu/d/i7fQQXG
Based on the 67W adapter, I made a new design to fit the smaller 70W adapter.
Small box used to put batt. charger electronics MRB045 for DIY installation of Lion bateries in old appliances working on 12V from ordinary USB charger . Same box can be used for same electronic board with other voltages-depends on number…
Stand to hold the Apple Original MagSafe Charger. There is a hole to eject the charger from the stand. 8 mm bumper pads can be glued into the four grooves to make the stand slip-resistant.
Wireless Charger Stand. Galaxy PETG, 20% infill. Enjoy.
Wall holder for Jabra Evolve2 75 Wireless Charger
This model was designed in the Fusion360 program! The model itself is made in excellent quality, but since it was printed in a small size, it is not very high quality.
This is Baseus 100w charger holder for IKEA Skadis pegboard. This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook system (I included the hook). Check out the collection of other IKEA Skadis holders I made .
Print with any materials that you want using the parameter suggested from filament producer. I suggest to use a 0.4mm nozzle and support needed
a magsafe charging dock, i printed it in pla and the charger is the common round wireless charger found on ali express link for the charger I used: https://a.aliexpress.com/_onyjXzM Recommend tree support I've included several versions…
Paw print magsafe dock. The Paw is held onto the stand like a peg hook. I printed the paw with 5% infill, and the stand was printed on default settings
Thats a Standcharger for the Xiaomi Redmi watch aktive 5 that i bought recently. If you remix pls tag me.
Inspired by the original model from Scott Yu-Jan in Maker World.
I have a Samsung galaxy watch 5 and I was bored of having the charger next to my bed and almost always lying on the floor. I have seen that there were several models that could fit what I needed, but I thought about designing my own and…
upd: untested for Galaxy S25, but come on, it's the same format as Galaxy S23 Use Magsafe charger from Apple. Assemble with two M3x8 screws. I added two GOST 11371-78 washers to make the hinge more strong and prevent the screws from…
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20 ... 100
Printed with PLA on Bambulab A1 mini with 0.4mm nozzle. Snap-fit securely holds the charger and attaches well to the Skadis board. If it doesn't fit as expected, I can provide model with a bit different/bigger tolerances.
iPhone car cupholder revised to allow access to side buttons and larger base bottom for better fit.
Simple bracket for the Shimano Charger so it can be mounted on a wall. Made to fitt the EC-E6002 Charger Printed with 4 wall loops and 25% infill.…
I mounted mine to the side of my garage cabinet, and I only had 1 hole to use! Remixed from model from User named Bukken. 10mm through hole, and can be reached through the hex pattern. I printed white to match my garage cabinet too… :-) I…
The ultimate skadis mount for your Einhell PXC charger. In contrast to other models it uses the universal hooks of CSD_Salzburg and they are placed quite at the top, which allows to take the holder down without needing to break anything.…
The case accommodates two 18650 cells connected in parallel and incorporates a TP4056 module for charging. A JST-XH connector serves as the output interface. Assembly Instructions: Place the 18650 cells into the holder and connect them in…
# UGREEN CD328 Nexode PD Charger Under-Desk Mount ## Overview This is a 3D printable mount designed to attach your UGREEN CD328 Nexode PD Charger under a desk or table. The mount helps keep your workspace clean and organized by moving the…
Topvork 6 port USB charger 60W holder mount two screws 40mm apart. Charger size 69mm x 30mm. No supports needed, print as pictured.
Dell 130W charger holder for vertical or horizontal mount. No needs for support. Charger model HA130PM130. Dell models: Xps 15 9530 9550 9560 9570 7590 Precision 5530 5510 5540 Do you like my models? Consider buying me a coffee .
This is a Multiboard hanger for Ryobi battery chargers that have holes spaced 114mm apart. You will need small thread T-Bolts to attach to Multiboard. 2/1/2025 - Uploaded Version 2. Has longer pegs so that it fits snug, but not too snug…
I did 5% infill with no issues with elegoo's pla+.
Qi charger 56mm diameter, 5.2mm height. Fits larger phones.
This holder is designed to hold the Bosch 4A Standard battery charger for eBikes. It features a cutout at the bottom to route the power cable as well as little standoff feet so it can be mounted on top of surface-mounted cables.
For HONDA CBF600S, maybe for other HONDA motorbikes USB charger holder: https://www.aliexpress.com/item/1005005677210208.html?spm=a2g0o.order_list.order_list Holder for gear indicator:…
This dock enables secure charging of the Peregrine dive computer by securing the charger with the silicone strap. No more careful balancing that might topple over in the night. The dock can also store the 2 screwdrivers needed to service…
This housing is designed to provide environmental shielding while remaining easily accessible. It’s spacious enough to accommodate charging cables with additional protection—like the one I use. It's not intended to be fully weatherproof;…
a loop to replace tape or fastener to keep the batteries stay in the GoPro Dual Battery Charger . I need to charge the battery during riding. it helps keep the batteries falling out of the charger.
The model is a holder for a wireless charger for the iPhone XS. Thanks to it, my children can place their phones down be
I needed a desk organiser to tidy up my lithium battery chargers and cables. Quick and easy to make with the Maker World MakerLab tool.
This MagSafe Headphone Stand with Wireless Charging is a sleek and functional accessory for your desk or gaming setup. It provides a dedicated place to store your headphones while keeping your MagSafe charger integrated into the design…
Honeycomb wall compatible holder for airpod pro case with integrated charging cable. Designed with the dimensions for my USBc to lightning cable. Cable slots in upward from the bottom through an oversized hole, then press fits downward…
I have modified the parametric files provided by @Marlfox_1264389 to work with this 3rd party charger that's cheaper than the original magsafe charger. To my best knowledge, the Ambrane Aerosync charger is only available in India; so if…
The 3/4" cable version was made by request and I am not 100% sure what charger it was for and had limited follow-up I am tempted to just take it off, for the moment I am pointing people to description. It has a large profile and cable…
Affiliate links for my favorite filaments to help support what I do are here: Linktree When I got my iPhone 16 I found that with a case it would not fit in the Qi Charging slot. 3D printing and some modeling came to the rescue so I was…
Original: https://www.printables.com/model/372300-bosch-ebike-charger-holder-bpc3400-4a/remixes
This model is designed to take a USB C port for a detachable cable. A version is available with an opening for a regular USB port for the wireless dongle. Uses two M3 bolts as contacts, make sure your bolts are attracted to magnets and…
This is a case for the ViFly WoopStor 3. It keep is protected and organised. It has a hinge that moves the top over the WoopStor 3. There is also a snap clip to close it.
This custom-designed wireless charger mount is perfect for Audi A5 and A4 models from 2016 to 2024. It is compatible with the OnePlus AIRVOOC 50W Magnetic Charger , making it ideal for OnePlus 12 and 13 phones with MagSafe ring covers.…
A fast and easy to print wall mount for your Surron charger. Don't forget to activate Supports: Everywhere If you like this design, please post your print with a picture. Anybody willing to support with a small donation is more than…
I created this model to hold my Canon LP-E10 batteries in place on the charger because the spring would push the battery up and prevent it from charging. This Model was created in Fusion 360. Enjoy!
A gridfinity base for Anker's MagGo 2-in-1 charger that I made for my nightstand.
These are the printable pieces to accommodate two OneWheel GT chargers in one box. Only the box needs modification (side holes drilled and IEC jack). Features… - Space for two GT home chargers - Cooling channels around the chargers - 40mm…
The original model already have extensive build instructions in it's description. This remix was just changed to fit the charger board you can find in the link below. PD65W Fast Charging Module Type-C USB Interface Supports PD3.1 QC3.0…
I was inspired by this video: For the X12, the converter board did not fit in the enclosure. Set the converter to 12.9V out. Weather you want to use the low voltage cut out depends on your use case. I set mine to 10V. Set the out put…
Printed laying on its side with the port for the USB pug facing up. No supports needed.
This model is designed to protect your Bosch smart system charger BPC3400 from damage while handling it. With the integrated feet, the charger will hover a little bit above the floor. This keeps rocks and stones from scratching it and…
Quick remix of the base for this wireless charger stand.
Use the universal Pegs from @KimJanosch https://www.printables.com/model/635620-skadis-skadis-universal-peg
Update 12/20/2025: Revised geometry to fit both Tesla Mobile Charger and Tesla Wall Connector (US market chargers only). Added test pieces on Plate 4 of the print profile to verify it fits your handle and cable. I designed my own version…
3D model description 📢 For commercial use, join our Patreon at: 👉 www.patreon.com/PrintForgeAU ONLY $10 per month! Keep your Milwaukee M12 batteries and charger neatly organized, secure, and easily trackable with this custom-designed…
I designed a simple Snorlax frame for my phone charger. The unit is designed for a large charging pad that I sourced from Amazon. If you have a different charger, I included an insert that is sized for the 56mm magnetic chargers. The…
I have pegboard attached to the back of my entertainment center and I designed a holder for this usb charger that powers everything on the entertainment center. Designed around this usb bank specifically, but should work for others within…
A holder to mount your Yarbo core charger to the wall. Print upright, no support needed.
This model is a remake to fit the charger of the Yamaha Moro-07 E-bike. Print upright, no support needed.
This is a compact and practical storage box designed for 7 CR425 batteries plus one USB charger . Perfect for anglers and hobbyists who use these small cylindrical batteries in electronic fishing floats, LED lights, or other compact…
I loved the design from imurfathersimba, but unfortunately, the iPhone 13 mini did not fit on it cause of the camera bump distance. So I used some design cues and redesigned it to fit my needs. I also added a spot at the bottom to hold…
A clean MagSafe desk charger inspired by the Apple Mac Mini. The MagSafe puck sits in the center so your phone lies flat — keeping it out of sight and reducing distractions while you work. Two versions included: Freestanding – a simple,…
Friend's ebike charge port cover broke off the thin rubber tether (common issue) and he was worried the whole thing would fall off without the tether. This is a smaller cap that slides into the port to keep dust out. Printed in TPU for…
This is a holder and charger designed for a laifen wave toothbrush. All you need to do is thread the charger it comes with through the top and out the bottom.
The GameSir G8 Plus doesn’t come with a built-in charging option for your phone, so I designed this tool to fix that. It securely holds a right-angle charger in place, letting you charge while you play without stressing the cable or…
Designed for https://www.aliexpress.com/item/1005008935292509.html Just something quickly thrown together to hold a generic USB adapter set in a box to stop me losing any of the bits into my drawers. Holds the bits and cord from…
Added multiboard push-fit pins to the charger wall mount model from D.McReynolds
This holder is designed specifically for the Oral-B iO electric toothbrush and its original charging base. It provides a stable and tidy place to store your toothbrush while keeping it fully functional for everyday charging. The design…
This custom-designed wall mount is specifically tailored for the NRGkick mobile charging unit. It provides a safe and snug fit to hold the charger vertically on a wall, keeping it off the ground and protecting it from damage or dirt. The…
This is a cap for the ends of the Menards Performax Battery Charger and Maintainer. Printed with 100% infill for strength. PETG
A cable clip to prevent my Xiaomi robot vacuum from getting tangled in its own power cable. To use it, simply insert it A cable clip to prevent my Xiaomi robot vacuum from getting tangled in its own power cable. To use it, simply insert it
Features: Made for two iPhone 13 mini's. Two part assembly with a captive right angled lightning to USB-C cable (part linked). Holds ID4 key and a another garage opener-like device. Nuances: Currently, the phones don't clear the centre…
There is a model online someone is selling for the V20 charger that is not public. So i decided to take inspiration from that and simplify it so it only includes 1 screw to mount. I also included my fusion files that has the outline of…
Two body wall mount holds the Xbox Elite controller and charging mount using the Xbox USB charging cable. Headset mounts below hiding mounting screw under the shelf. Text can be removed by separating the objects.
Inlay for a standard Bosch L-Boxx to hold multiple 18V batteries + two GAL 18V-160 charger. The design is modular, so you can adjust it to the batterie sizes. The two vertical batterie places can only hold up to a ProCore 5.5ah, anything…
I couldn’t find a wireless charger that fit the LILLHULT cables because of their long connector – so I solved the problem myself and wanted to share it with others. I have made the perfect wireless charger for LIVBOJ and their IKEA…
This is a three brush holder for the Phillips Sonicare 3100 Charger Stand by ZRNNN
友人たちが使うパワーアシストスーツのバッテリーと充電器を手軽に持ち歩けるようにするフレームを設計しました。 下記の外骨格は、同じタイプの専用バッテリーで駆動します。 ATOUN ”ModelY”、”ModelY+KOTE” UPR”EP＋ROBO” I designed a frame that allows my friends to easily carry around the batteries and chargers for their power…
deux versions disponible un normal et un avec un trou pour voir la LED la dimension et de 76mm x 42mm
Charger Cable Organizer final edition (print-in-place) A polished, print-in-place cable organizer designed for phone charger cords, USB cables, and other common cable types. This Final Edition blends clean aesthetics, robust cable…
Cradle to hold and charge your Phone - in this case done and shown for a iPhone 12 with a very lean case. BoM: Brodit vehicle mount |…
I designed this easy to print, support free charger for my W212 E350. Fits the linked magsafe puck for sure, other 3rd party pucks untested. While you can pressfit, I recommend using either superglue or elmer's glue to stick the model and…
Charger design for Baufeng UV-5R standart battery. I m using cheap chinese 2s chargers. Charger size 31.3 mm x 18.2 mm. For the charging pins I use short pieces of ordinary nickel strip. I solder them to the charger with a short wire. The…
