Endgame Arc Reactor (Movie Accurate and Wearable) Wireless Charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,74 € – 0,90 € netto (bez VAT)
Dla pliku: diffuser_outer_for_ender_3_with_honeycomb_infil.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,82 € netto (środek widełek).
- Masa podana przez autora
- 5 g
- Czas druku podany przez autora
- 1,07 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Video tutorial on assembly: https://youtu.be/afmivjD-WDw If you like this one there's a "donate" clicky thing on this…
- Ocena
- 4,857 / 5
- Polubienia
- 445
- Pobrania
- 1369
- Wydruki
- 9
- Wyświetlenia
- 10 298
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Video tutorial on assembly:
If you like this one there's a "donate" clicky thing on this page to help me keep doing this kind of stuff so I can give the files out on Prusaprinters for free. Even a buck helps. I really want to do retractable movie accurate Shuri gauntlets with blue pyrotechnic enhancements and have started on the active shutter Spiderman eyes, but without a bit of help it's hard to justify the ridiculous amount of time it takes to do stuff like this well with a full tutorial. Begging over.
Print instructions
Edit: added a gcode file for ender 3 for the honeycomb infill outer diffuser for people that don't have simplify3d and happen to have an ender 3
Has room for magnets so it snaps onto your chest. The inner electronics panel was designed so you could hot glue in cheap coin cell powered cool white "fairy lights" with no soldering required to light it up with the same light pattern as the movies. You will need to purchase 32 6x2mm neodymium magnets and an optional Nylon Halter Neck X-Shape Elastic Body Chest Harness for optimal wearable support. Parts labeled with a "1" after the file name are for the wireless charger version and replace their counterparts in the non-wireless charger version.
Video tutorial on assembly:
Full picture and text tutorial on assembly:
https://www.instructables.com/3d-Printed-Endgame-Arc-Reactor-Movie-Accurate-and-/
Partial tutorial on how to build wireless charger version (doesn't have all the details but should be enough for a maker with a little building experience to figure it all out complete with links to materials):
https://hackaday.io/project/167318-wearable-endgame-arc-reactor-wireless-charger