J1772 EV Charger Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
J1772 Charger Holder (most common charger type for non-Tesla electric cars) with Cord Management
- Ocena
- 4,889 / 5
- Polubienia
- 303
- Pobrania
- 2987
- Wydruki
- 37
- Wyświetlenia
- 11 016
- Oceny
- 36
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
J1772 Charger Holder. Slim profile - doesn't stick out from the wall too far. Mounting holes are aligned so that you can mount it to a single stud. Loop the extra cord over the top.
No supports needed as long as you print it on its side (as shown in the picture).
UPDATE 1: I made a “Larger” version of this model with two key improvements: 1. A larger notch as per the feedback from JVANHOU (thank you!). 2. I increased the distance between the port and the wall. I found that if I had the cord looped over the top, then often times I have to move the cord in order to get my hand around the J1772 to remove it. Hopefully this fixes that problem. I'll be printing/testing this out shortly.
UPDATE 2: I uploaded version 3, with an improved the length of the notch, which provides a better fit (latches on better). I also made other minor improvements. I highly recommend this version!
If you download the model, please do me a favor and hit the “LIKE” button too. Thanks!