J1772 EV Charger Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
J1772 Charger Holder (most common charger type for non-Tesla electric cars) with Cord Management
- Rating
- 4.889 / 5
- Likes
- 305
- Downloads
- 3,006
- Makes
- 37
- Views
- 11,079
- Reviews
- 36
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
J1772 Charger Holder. Slim profile - doesn't stick out from the wall too far. Mounting holes are aligned so that you can mount it to a single stud. Loop the extra cord over the top.
No supports needed as long as you print it on its side (as shown in the picture).
UPDATE 1: I made a “Larger” version of this model with two key improvements: 1. A larger notch as per the feedback from JVANHOU (thank you!). 2. I increased the distance between the port and the wall. I found that if I had the cord looped over the top, then often times I have to move the cord in order to get my hand around the J1772 to remove it. Hopefully this fixes that problem. I'll be printing/testing this out shortly.
UPDATE 2: I uploaded version 3, with an improved the length of the notch, which provides a better fit (latches on better). I also made other minor improvements. I highly recommend this version!
If you download the model, please do me a favor and hit the “LIKE” button too. Thanks!