Phone Stand (Improved Charger Cutout)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slight remix of a popular phone stand improving the shape of the charger cutout for better printing.
- Ocena
- 4,857 / 5
- Polubienia
- 175
- Pobrania
- 1972
- Wydruki
- 31
- Wyświetlenia
- 4954
- Oceny
- 28
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
The original model was good looking and very sturdy.
The only problem was that when printing on its side a part of the “upper” edge of the charger cutout would be printed into thin air. To be able to print it without supports or without sagging layers I made this slight variation which has a 45 degree slope on both edges of the charger cutout.
After receiving some feedback I added a variant which has the bottom rear corners strengthened so it doesn't flex that much. You might want to check it out.
Happy printing!