Liczymy pasujące modele…
This headphone stand was designed to be printed in one piece, without support, to be used with larger headphones. I wanted it to be a more minimalist option that would work well in both office and home environments. I have tested this…
Easy to print in Place no Supports I printed it @0.15mm Layerheight
Stylized abstract controller stand featuring an aggressive, spiked geometric surface. Designed to securely hold standard game controllers (Xbox / PlayStation). Optimized for FDM printing with PLA. Stable base to support the controller’s…
I designed this PhoneStand using Solidworks's tools for geometry optimization so It could be strong enough and as lightweight it could be. Below is a screenshot of the static analysis:
I made a phonestand in credit card size (53 x 84 x 1,6mm). Fits for smartphones up to 12mm thick. I printed mine in TPU A95 , 0,2mm layer hight.
A tabletop headphonesholder I made because I wanted to have my headphones on hand at my worktable.
My daughter needed a stand for her smartphone while she was dancing, so I made this simple holder for her. I added a model with a 67° angle. The original one is approximately 81°.
Phonestand to hold your phone in three different textures: voronoi, weave and basket. Can fit most phones. Width of the stand 70 mm (can be scaled) Maximum thickness of phone: about 17 mm
This holder is designed to hold a Oneplus 11 horizontally without the tabs getting in the way of the time-scrollbar.
Phone stand with space for loading cable it was designed for a Honor 9 but the V3 Version fits more phones. The phonestand.stl is the latest version with thicker ground
Phonestand vertical, slim with integrated charging cable I use it to place the prusaconnect phone camera anywhere outside the enclosure . One design for max. 8mm and one for max. 10mm thick phones. The recess for the charging plug should…
This headphone stand was designed to be printed in one piece, without support, to be used with larger headphones. I wanted it to be a more minimalist option that would work well in both office and home environments. I have tested this…
Small but sturdy phonestand, easy to carry, works also good as fidget toy (rotating), just fun and can also save motivation in long meetings
A creditcard sized phonestand 85,60 x 53,98 mm adjusted to 85,60 × 54 mm :-) thickness 3.2 mm (A normal credit card is approx. 0.8 mm, so four creditcards thick) Advantages Print-in-place, ready when printed Fits in your creditcard…
Downward Dog Pose People practicing yoga know this asana. Printing without support is exactly in the position in which you download this file. Category: Mobile Phone
it is a steam game based product, which is called Blueland developed by me and my friend.
Heart Keychain Smartphonestand / Herz Schlüsselanhänger Handy Ständer in 2 Neigungen und als Anhänger ohne Halter.
I designed this iPhonestand. In this stand you can charge your phone while being on a conference call. There are 2 version, one for the smaller iPhones (like Iphone 8 and SE) and one for the newer iPhones (like 14, 15 and 16). I printed…
PHONESTAND The stand can hold the phone upright or laying down. The tray is perfect for storing rings, earings, etc when going to bed
here you can download my creation of an magsafe phonestand for iphone. due to the fact, that i fortunately do not have an iphone i had to render this scene for you to showcase :D i modeled it after these measurements if there's anything…
It's a phone stand that goes on a keychain. Comes in 12mm and 15mm versions, as well as a minimal format that tapers on both ends to take up less space and a wide format in 2 styles that takes up more space but balances a phone much…
It's a keychain that can work as a phone stand and a whistle. I've included a step file, so you can put your name or whatever you want to add on the flat side. It can be a good gift idea.
I printed with 3 walls, 3 top and bottoms, 15% infill and a 0,4 mm nozzle. I also added fuzzy skin with 0,15mm distance and 0,05mm depth to add a nice texture and hide the layer lines
Another phonestand made in 10mm thickness, af a 15mm thick slot for the phone/tablet to rest on. big cut outs to save on filament but still a strong design.
Remix of https://www.printables.com/model/382087-ikea-livbojnordmarke-smartphone-stand
this is my first model so if it isnt great its fine. but i hope you like it :).
Simple and quite chunky phone stand for monitoring my Prusa Mini. Printed with Polymaker Polylite PETG
These are files for every letter of the alphabet, so you can surprise every one of your family with his or hers individual smartphone- or tabletstand. Sketchup2017 file included, if you want to change something.
This model is ai generated based on another model ( original ). I have included both the ai_generated model as well as a modified printable version. Requires 256x256x256 build volume.
A horse-themed device stand that allows you to view and charge your while it sits on this nice stand. I kept all the features designed by @JR and simply added the notch for the convenience of charging your device.
I first printed it with PLA+ Filament on a Prusa Mini+ with an 0.4 mm nozzle, but thats to weak, so i finally print this with PETG-CF.
Easy to print in Place no Supports I printed it @0.15mm Layerheight
Stylized abstract controller stand featuring an aggressive, spiked geometric surface. Designed to securely hold standard game controllers (Xbox / PlayStation). Optimized for FDM printing with PLA. Stable base to support the controller’s…
Material: PLA Layer height: 0.2 mm (0.16 mm for finer detail) Infill: 15–20% Supports: Not required Print orientation: Flat on base
I designed this PhoneStand using Solidworks's tools for geometry optimization so It could be strong enough and as lightweight it could be. Below is a screenshot of the static analysis:
I made a phonestand in credit card size (53 x 84 x 1,6mm). Fits for smartphones up to 12mm thick. I printed mine in TPU A95 , 0,2mm layer hight.
A tabletop headphonesholder I made because I wanted to have my headphones on hand at my worktable.
An simple and elegant, curvy Phonestand/-holder. v1 is thicker, with a width of 10mm. v2 is thinner, with a width of 6mm.
📱 Skadis Phone Stand 🧩 Description Keep your phone perfectly positioned and accessible with this Skadis-compatible phone stand . Designed to clip onto the IKEA Skådis Pegboard, this stand holds your device securely at a convenient angle,…
My daughter needed a stand for her smartphone while she was dancing, so I made this simple holder for her. I added a model with a 67° angle. The original one is approximately 81°.
Phonestand to hold your phone in three different textures: voronoi, weave and basket. Can fit most phones. Width of the stand 70 mm (can be scaled) Maximum thickness of phone: about 17 mm
Generative designed smartphonestand. I printed mine with pla, 0.15mm layer hight. Works well without support.
I needed a phone stand which can be fixed to a car dash board on a defined position and orientation (using Velcro) and which could handle a variation of different phones I used M3 heated inserts and m3 screws to assembly but you can also…
Notebookholder with room for two moleskin notebooks, a small notepad and a phonestand one the front.
This is my second model of this mobilestand, an improvement from my previous model such as a better fit and the angle of the holder where you place the phone is better. I have only tested it on Samsung Galaxy S10 + and it works very well.
Printed on Prusa MK3S+ with default 0.2 Prusament PETG settings.
Warning read this before printing! I designed this headphone stand to print on my ender 5 pro(220x220). The extension was planned to snap on to the arm of the mainplate, but it didn't work with Pla and my settings. I broke the arm while I…
A simple headphonestand to support 2 headphones. Instructions Print settings : Layer height : 0.2mm Raft : yes Support : Touching build plate Assembly: All pieces should snap together
Do you want to use your old phone as a webcam? If so this print will help you to mount your phone on top of your monitor. I made this because i couldn't find a model to fit my monitor monitor (fits all my MSI monitors). This is also my…
This is a two part phone stand where the top part is printed in PLA or PETG and the bottom part is printed in some flexible material. And then glue the two together for a nice stand that does not slide around.
Created a Phone Stand for watching Movies on the Train etc. Just put the top of your phone in it and adjust the angle to your needs. There is a hole in one side to add the MobiPhoneStand to a keychain. You can get those carabiner hook for…
This phone stand requires printing support in one place only, under the part that holds the phone bottom. Print on side (like in the stl file). I've tested stability with devices up to 16 cm long (6.4"). I can swipe down the top bar…
Holder for the IKEA wirelesscharger. Print instructions Printed with Prusa Silver at 0,15mm Layer without Support
I had problems with the hinges of the original design but still like the idea. so I came up with different design. V2: improved hinges compared to my first version
Smartphone holder with port for charge cord. Adjustable with worm-gear. Glue Cradle gear to cradle on assembly. I assembled the stand completely, then added a few drops of CA glue to the cradle gear side.
Print at 100% Infill You NEED supports for the theeth but no brim or raft. I made it for my Iphone X but it fits most.
Yet another hook for holding a headphone. But this one is exclusively for microphonestands. The inner hole for the pole is quite tight and fits for poles with a diameter of 15mm. The hook is simply pushed and shoved onto the pole.
your cupholder can still be used. I added F360 source file if you want to adapt to your phone size.
When slicing this model I noticed some unnecessary seams so I simplified it via lowering the triangle count. Prints very nice in vasemode with 0.8 mm line width! ko-fi.com/vhart
Hier ein Höhen- und Neigungsverstellbarer Handy- und Tablethalter. Den Knopf zweimal drucken. Es werden zwei M5-Inserts und 2 M5x10 mm Schrauben benötigt. Gedruckt mit PLA, 4 Wandlinien und 25%-50% Infill. Wer den Sockel schwerer möchte,…
It's an easy print, so not much to explain here I guess :) It may be useful to use a brim! A fun addition is to put your name on it in your slicer software.
I was experimenting with features in Inventor and came up with this phone stand. Nothing special, just wanted to share it. My phone keeps falling off, so I added V2 to solve the problem.
For the best stability, i added some double sided tape on it. no support needed.
this very simple phonestand can be printed without supports when layed on its side in the slicer. It does what it is supposed to do and doesnt look half bad doing it I hope it helps you and serves you well
He sits on your desk ready to assist you. Holding up your phone (or potentially jewellery). Granted he is not that small but he fits on the bed of the MK3. If you slice the model yourself you could decrease the infill.
It's a foldable smartphone stand. You can 3D print it in one go using a 3D printer (probably). The filament used is eSun
Deutsch: Einfacher Handyhalter für viele gängige Handy Modelle wie iPhone. Funktioniert im Hochkant-, als auch Querformat Druckeinstellungen Handyhalter Schichthöhe: 0,3mm Wandlinien: 3 Material: PETG / PLA English: Simple phonestand for…
Phone stand with Spotify Logo I remixed the original stand to a more stable version. Since I only use it for a phone that makes Spotify available to all guests of the house, I also added that logo. The size can be scaled to your phone. In…
Yet another Headphone Stand I designed this, because I wanted a Headphone Stand that could be printed in one piece, yet accommodate larger Headphones. It is designed to be printed standing, so I can make use of the available height of the…
