Liczymy pasujące modele…
Phone Stand with honeycomb structure, it also has a place for charging your phone. I recommend you print this on its side, I printed it with some custom supports. However, I don't think you'll need supports if you print it on its side. I…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
This phone/tablet stand is designed to be as universal as possible, print in place, and fold flat while being very durable. It comes in 3 sizes. Each variant is designed around its specific load. Small - 52x83x3mm - About the size of a…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Phone holder
Wydruk około 3,44 €–4,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I really like gears - you can see it on my models, there are many on this topic. I was inspired by similar holders, but I added new things to this one - it can be printed print-in-place, I added a locking wheel so that the gears do not…
Wydruk około 6,45 €–7,88 € nettoWstępna wycena jednego wariantu
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
phone stand with flexible design
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
A simple but characteristinc design for a modern headphone or headset stand. Great to display or rest your device on your desk. Best to print in - no special settings required, standard print settings are just fine Happy printing!
Wydruk około 3,49 €–4,27 € nettoWstępna wycena jednego wariantu
GOAL : Mount a display (phone in this case) below the monitor in my home office. This display shows my agenda, provides controls for lights, AC and shows temperature/time. In the (near) future it will provide more controls and info.…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
D: Schutzhülle für das Apple iPhone 7 und iPhone 8 Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. E: Safty case for Apple iPhone 7 and iPhone 8 I printed the case in PLA as a hard case…
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
D: Schutzhülle für das Apple iPhone XR. Ich habe zwei Modelle gezeichnet eines mit Rückseite und eines ohne (Bumper-Hülle). Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. Die Hülle ist…
Wydruk około 3,41 €–4,17 € nettoWstępna wycena jednego wariantu
D: Schutzhülle für das Apple iPhone XS und iPhone XS MAX. Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. E: Safty case for Apple iPhone XS and iPhone XS MAX. I printed the case in PLA…
Wydruk około 5,81 €–7,10 € nettoWstępna wycena jednego wariantu
Headphone holder_dzino, Headphone holder_dzino2025
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
D: Schutzhülle für das Apple iPhone 7 plus+ und iPhone 8 plus+ Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. E: Safty case for Apple iPhone 7 and iPhone 8 I printed the case in PLA as…
Wydruk około 5,28 €–6,45 € nettoWstępna wycena jednego wariantu
Easy to print dummy model of the iPhone 15 Pro Max. Print as oriented and no supports needed. Perfect fit in original case.
Wydruk około 1,91 €–2,34 € nettoWstępna wycena jednego wariantu
We all love to lounge on the couch and scroll through our phones. Now you can take the couch with you and your phone has a cozy spot of its own to rest on. This stand features a groove to rest your phone in while being propped up by the…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
printed with PLA, but can be Petg or TPU. TPU would be best choice. If you need some help, or need change the sizes please contact me
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Headphone desk support, thought out as modular - I also want to print some other models to attach to the desk, things like a sorting tray for small parts or a soldering iron holder. While the support itself easily slides in, after you…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tesla Supercharger Phone Charger! The original design didn't fit type C cables so i remixed it, i uploaded the full charger in each folder for easy download but the only part that differs is the Red Middle. The Type C socket is made for a…
Wydruk około 0,90 €–1,11 € nettoWstępna wycena jednego wariantu
A nice rounded wall hanger for a pair of headphones, this version has a hidden attachment. Choose from a smooth mounting bracket (I use this, attached by a 3M Command strip trimmed to fit) or a bracket with a single screw hole for a more…
Wydruk około 3,10 €–3,78 € nettoWstępna wycena jednego wariantu
This is a dashboard mount for Fanatec's CSL DD wheel base along with a Google Pixel 6a. Feel free to tinker with the provided .ipt file (Autodesk Inventor or Fusion 360) or even send me your smartphone model and I'll gladly modify the…
Wydruk około 3,06 €–3,73 € nettoWstępna wycena jednego wariantu
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Wydruk około 16,29 €–19,91 € nettoWstępna wycena jednego wariantu
Hello there. I created a Phone Sound Amplifier Stand (Mono, Dual, Low Poly) for everyone, who need practical stand for Your phone :-) I decided and I created this “easy printing” model for everyone. I created entirely by myself and I did…
Wydruk około 24,93 €–30,46 € nettoWstępna wycena jednego wariantu
This is a remix of the original Phone Stand: https://www.thingiverse.com/thing:2120591 I adapted it to fit better my OnePlus 8. The major changes are: The height of the stand has been increased in order to have more space underneath the…
Wydruk około 5,03 €–6,14 € nettoWstępna wycena jednego wariantu
Basic parameters: Phone holding lenght: 72.6 mm Dimensions: 72.6x83.3x64 mm Supports: not required (bridge)
Wydruk około 7,00 €–8,56 € nettoWstępna wycena jednego wariantu
I have both Yaesu and Icom radios in the shack and wanted a common mount fo the microphones. This adapter modifies the Icom microphone “clip” to the “button” style found on CB and Yaesu microphones. It fits in the mic ok, a small drop of…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
This stand holds your Mate at an angle while preparing it. It also is a stand for your smartphone.
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
This is an iphone12/iphone12 pro with Case mount for a Sprinter 2019+ (VS30). Inspired by another mount but redesigned from scratch to make it easier to print and remade for the iphone12/iphone12pro. Print instructions 15% infill, in PETG…
Wydruk około 2,83 €–3,46 € nettoWstępna wycena jednego wariantu
This stand will not only hold your phone, but also make the speakers sound a little bit better! There are no batteries to charge and no “bluetooth pairing" steps required. I use this at my workbench because sometimes I'm too lazy to use…
Wydruk około 7,56 €–9,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Smartphones put power in the hands of everyday people to hold awful behavior to account, but holding up a phone makes you a target. This print lets you use your phone as a body camera, and attaches to a shirt, lanyard or backpack. Add an…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
I designed this support to hold my phone in my car because I couldn't find what I had in mind ;-) Fit the Mercedes Command Audio Screen (not touch screen). It is designed in two part with a dovetail for assembly. The frame can be equiped…
Wydruk około 3,57 €–4,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Eine alternative Babyphone Betthalterung für das Babyphone Philips Avent SCD845/26. Sollte die V.1. einen zu steilen Winkel haben kann diese an der ggü. Seite des Babybettes installiert werden. See also my other bed mounts:…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
Its just a replacement for a broken microphone mount. As it is, is easy to print in PLA or PETG. Suitable for FIFINE microphones . Additional hardware may be needed. In fact, you should keep the original threaded nut that can be extracted…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
A thicker version of my previous phone stand for thicker covers.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Print optimized construction for a simple cell phone shelf that uses size Small Command Strips. NOTE 1: You will need to duplicate and modify the support in order to have both sides. A suggested print orientation file is included in the…
Wydruk około 5,41 €–6,61 € nettoWstępna wycena jednego wariantu
Optimized for less material and shorter print time
Wydruk około 4,84 €–5,92 € nettoWstępna wycena jednego wariantu
This is my take on a headphone desk mount. It prevents headphones from getting knocked off the mount pretty well.
Wydruk około 3,40 €–4,16 € nettoWstępna wycena jednego wariantu
I don't know about you, but I tend to watch movies lying on my side in bed and watching an ipad on a normal stand is difficult. This stand allows me to watch movies lying on my side in a more natural position. The other side of the stand…
Wydruk około 3,79 €–4,63 € nettoWstępna wycena jednego wariantu
Headphone wall hanger. Can also be used for cable managment as long as the cables arn't to heavy. Do you wan’t to make your own remix? Feel free to use the enclosed Fusion 360 files. *.f3d Print instructions No support nessesary.
Wydruk około 2,57 €–3,14 € nettoWstępna wycena jednego wariantu
Give your phone some time to rest and recharge. Story Ever since I saw ThePhonePillow by HpInvent, I wanted to remix it into a wireless charging pillow. Alas, HpInvent's is using a very restrictive closed license, so I would not have been…
Wydruk około 8,97 €–10,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple holder that fits an iPhone SE (2nd Generation) with a case. Attach to the wall with two command strips. Specs: Phone with case size: 73mm by 11mm Charging cable: 10mm
Wydruk około 0,89 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a organizer designed to hook onto the side of a bed. It has a hook for keys, a holder for smartphones with a hole for a charger, a holder for airpods with a hole for a charger, and a holder for an applewatch gen 3 and its charger.…
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
Iphone 17 Pro Replica sized as the original
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
The .3mf contains a prepared model. If you are using a different slicer than Prusa Slicer, just split the model in half along the y/z plane and add pegs or similar feature to re-connect the two halves after inserting the cable. On the…
Wydruk około 5,40 €–6,60 € nettoWstępna wycena jednego wariantu
Standfuß für dein Smartphone
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
This is a slim tag (0.7mm) that fits inside your phone cover and allows you to hang it with a carabiner or ring to your neck, your pocket or bag. It's made for phone cases with a full enclosure around the charging port (see specific image…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Filament : Devil Design. Green Transparent. PETG 0.20mm. Infill : 15% Gyroid. Nozzle : 230c. Bed : First layer. 85c. Other layer. 70c. Support : None.
Wydruk około 4,04 €–4,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Iphone 3G OR 3GS replica sized as the original
Wydruk około 1,82 €–2,22 € nettoWstępna wycena jednego wariantu
This Smartphone Sunscreen Case shields your phone from the sun - helping to prevent overheating while you enjoy the outdoors - whether you're at the beach, the pool, or just hanging out with friends on a sunny day! Fits many (non-jumbo…
Wydruk około 9,84 €–12,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello World! :) We have all looked at something and thought "That looks nice" before, and then thought "But it doesn't do anything" We also might have run into a situation in which a phone holder might have been useful. For reading,…
Wydruk około 2,42 €–2,95 € nettoWstępna wycena jednego wariantu
This turns your Sonos Move into a phone holder. Features: Holds any device (in landscape) up to 10cm/3.9 inches wide All buttons and lights on top of the Move are still accessible You can still grab the Move by the handle and carry it…
Wydruk około 3,81 €–4,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My Foldable Phone Stand with a Tesla Logo in the leg, see original model for CAD model and other info: I used ASA Prusament lipstick red with galaxy black and used faux MMU method to print 4 layers of logo color with manual color changes.
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Print in place model with hinges to support your mobile at varying angles. Foldable foe easy slim storage.
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Spongebob phonestand
Wydruk około 3,84 €–4,70 € nettoWstępna wycena jednego wariantu
Prusament : Galaxy Black. PETG 0.20. Infill : 15%. Gyroid. Nozzle : 240c. Bed : 80c. Support : None.
Wydruk około 4,13 €–5,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Filament : Devil Design. Vanilla PETG 0.20mm. 15% Infill : Gyroid. Nozzle : 230c. Bed : First layer. 85c. Other layer. 70c. Support : None.
Wydruk około 4,07 €–4,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
YAMPH Wall Mount Mobile Phone Holder Of course you can download *.f3d file and make your own remix in fusion360. Print slow can be a good idea, no need for support. PLA worked for me, but any filament should work. There are two versions:…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
This is a remix of the phone stand from apalexander on Thingiverse... https://www.thingiverse.com/thing:3065943 I wanted one that I could put my OnePlus 6 in while it was in it's OP case. I also wanted to adapt to fit it in my cup holder.…
Wydruk około 11,81 €–14,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design is suitable for iPhone models 6S, 7, 8, SE 2nd generation and SE 3rd generation as they share a similar design and dimensions of their cases. All butons and cameras are accessable. For a perfect fit you should use a phone case…
Wydruk około 0,94 €–1,14 € nettoWstępna wycena jednego wariantu
An alternative baby phone bed mount for the baby phone Philips Avent SCD845/26: The holder can be mounted anywhere on the side of the baby bed. In addition to the two parts, you need four M3 screws with nuts. Suitable for baby beds with…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
I couldn't find a mount for a PM2 online so I designed my own. This let's me have handy access to see my phone while rowing on a Concept 2 rowing machine. The spring clip holds the phone steady under the rowing machine's vibrations.…
Wydruk około 4,61 €–5,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print COREONE + MMU3 PLA REFIL 15% Kubic LINE 0,3
Wydruk około 11,38 €–13,91 € nettoWstępna wycena jednego wariantu
This model is meant to leverage the cup holders of your center console to hold it in place. It uses the most of the i3 MK3 build plate minus the skirt. This was needed to prevent someone from walking up and tasting mom or dad's drinks. It…
Wydruk około 13,07 €–15,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Filament : Devil Design. Green Transparent. PETG 0.20mm. Infill : 15% Gyroid. Nozzle : 230c. Bed : First layer. 85c. Other layer. 70c. Support : None.
Wydruk około 3,66 €–4,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple headphone hook that clips onto the front panel of a desk drawer. I designed it for my specific setup, where: the drawer front is 15mm thick there is a 3mm gap between the drawer and the underside of the desk It works…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
This is the iPhone case with a honeycomb pattern and Science Salon text on it. Sadly some parts of the letters do fall out after printing. I recommend printing it out of PET (PETG) because it is stronger and more durable than PLA. Also…
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
My daughter needed a stand for her smartphone while she was dancing, so I made this simple holder for her. I added a model with a 67° angle. The original one is approximately 81°.
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
The clip will now hold the phone tight and it will not fall out. Increased griping strength. Well I guess I am a little OCD. The D ver of this really fits nice and snug, so I am now happy. Also if you have an MK4S with HP nozzle I…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a stand for a Verbatim wireless charger pad with a cutout for iPhones or other phones with large cameras on the back. The cutout is designed so that the phone can be placed either vertically or horizontally without the pad losing…
Wydruk około 6,91 €–8,45 € nettoWstępna wycena jednego wariantu
This remix repositions the ball joint to the side of the mount, giving the dashboard phone holder a much wider range of usable angles. The original design—and the ball supplied with the holder—assumes the phone sits directly in line with…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I had to fix my microphone stand. I recycled the threaded insert for the rotating part and used an M8 nut for the vertical mounting part.
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
A 100% 3D printed Smartphone-holder-arm that offers, at least, three axes. And the option of double braces between the axes. In the standard configuration, the arm easily supports around 500 grams in any position. The versatility of this…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
A cat phone stand for all of us animal lovers. Was originally posted on Thingiverse by I don't remember who, and when I wanted to reprint I couldn't find this model again so I uploaded the one on my computer to share it over here for more…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to make a simple and high quality CNC drawing machine to draw on almost anything. I'll step you through how to build your own…
Intro I have originally setup a Bambu Studio project file that has everything laid out, however, if you're not using Bambu Studio or it's printers, please refer to this image for layout, printing orientation, number of parts needed, etc.…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
Deskmate is a clean, modern modular desk organizer that keeps your workspace stylish and clutter-free. 🔹 Holds pens, markers, and styluses 🔹 Phone stand fits most smartphones 🔹 Tray for USB drives, paper clips & small accessories This is…
This is a relatively easy to print phone case for the iPhone 15 Pro Max so you can protect your shiny, new, titanium phone. The case consists of two pieces: the case and the camera guard. Print the case in TPU or other flexible filament,…
This model will require some supports between the legs, under the hands, zipper and the head as well. Add plenty of infill to keep it sturdy! I recommend getting the bottom plate for stability, but I have not been able to test this print…
Leave a Like or a Make to support me ;) Improvements: -clampable clip with different dimensions (depending on the ventilation grille, see pic) -reinforced backplate -attachment points changed to be able to grip even large smartphones The…
Official Universal Cover models for use with CMF Phone 2 Pro. The part is attached to the rear of CMF Phone 2 Pro with 4 M2 screws and our Accessory Point Cover (M2.5). Find device dimensions, screw sizes and more uploaded to support your…
The folding procedure is in the attached pdf.It's a good idea to use washers everywhere on the M5 bolts. Static_part , joint 1, joint 2 can also be combined with version 1. Numbers of printed butterflies: Butterfly_cover_long.stl - print…
Gona make your own holder or case for your new iPhone? Maybe you want to see how it look before order starts? I printed flat @ 0,1 layer height
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
This self-designed flexible case fits perfectly on the Apple iPhone 13 pro (iPhone 14 pro version included as well). It offers precise cutouts and covered buttons that are easy to press. I had to experiment with the print settings quite a…
Gona make your own holder or case for your new iPhone? Maybe you want to see how it look before order starts? other iphone 16 series models: iPhone 16 Pro https://www.printables.com/model/1003040-iphone-16-pro iPhone 16 Plus…
This is a flexible case for the iPhone 12 Pro Max. This must be printed in TPU, TPE, or other flexible materials including some nylons. Do NOT print this in PLA, PETG, ABS, ASA, or any other material that is not flexible. You may not be…
Designed in Fusion 360 for Galaxy S21. Needs supports “everywhere”. Print it in TPU with around 8% infill and it will have a nice squish to it. Included the f3d file if people want to tweak the parameters Update: Added my 3mf file so…
Keeps the cable from becoming tangled and damaged. Made to fit into the original box. Printed with supports on the build plate only. Rafts: No Supports: Yes This is a remix of; https://www.thingiverse.com/thing:3248235
I designed this to be a thick bottom to print flat with no supports but to also have protection for the camera. Iphone 16 pro max case
The folding procedure is in the attached pdf.It's a good idea to use washers everywhere on the M5 bolts. Version 2: https://www.printables.com/cs/model/529125-variable-mobile-phone-holder-with-clamp-v2
Please note! Xbox one and series controllers use slightly different battery covers Please make sure to choose the right one! Using the wrong one can end up with the tabs breaking in your controller (which shouldn't be dangerous but will…
This is a flexible phone case for the Apple iPhone 15 Pro. It optionally supports the addition of an adhesive metal MagSafe ring in the back pocket, and has a separately printed inlay ring for lens protection. The main case is meant to be…
iPhone Stand Dock for Cupholder BMW F30 F31 F20 and many more I designed it to fit an Apple iPhone 8 in my BMW F31 cupholder. //UPDATE: Works great with the new iPhone 13, older Models as well. Hi there, I designed something special for…
There is printable version of Phone Ring for Quad Lock system.
Let your phone relax to the max :) Flexible fabric was created with my 6 KByte endless fabric Printing Printed in PETG / 0.3 layer height PLA should work too (needs proper bed adhesion) Don't use supports or brim (would be hard to remove)…
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
