Headphone hanger with hidden wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nice rounded wall hanger for a pair of headphones, this version has a hidden attachment.
- Ocena
- 4,857 / 5
- Polubienia
- 80
- Pobrania
- 579
- Wydruki
- 20
- Wyświetlenia
- 3341
- Oceny
- 21
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A nice rounded wall hanger for a pair of headphones, this version has a hidden attachment. Choose from a smooth mounting bracket (I use this, attached by a 3M Command strip trimmed to fit) or a bracket with a single screw hole for a more permanent attachment.
Once bracket is mounted to wall, hanger slides onto it from above, hiding the bracket. I included two models for the bracket, one with a snug fit and another with a loose fit. Comments welcome!
Side note: hanger feels very nice in the hand, the rounded edges are quite pleasant. Fits fairly bulky headphone bands (Sony MDR-1A pictured), will likely fit a large range of models.
Print instructions
Category: Organization Summary
A nice rounded wall hanger for a pair of headphones, this version has a hidden attachment. Choose from a smooth mounting bracket (I use this, attached by a 3M Command strip trimmed to fit) or a bracket with a single screw hole for a more permanent attachment.
Once bracket is mounted to wall, hanger slides onto it from above, hiding the bracket. I included two models for the bracket, one with a snug fit and another with a loose fit. Comments welcome!
Side note: hanger feels very nice in the hand, the rounded edges are quite pleasant. Fits fairly bulky headphone bands (Sony MDR-1A pictured), will likely fit a large range of models.
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 15%
Filament: Atomic Filament PLA Silver
Notes:
Prints without supports when flat side is down, no overhangs >45 degrees in model (I think).