1 / 3
Phone holder/bracket for monitor — zdjęcie 1
1 / 3

Phone holder/bracket for monitor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount a display (phone in this case) below the monitor in my home office.

Ocena
5 / 5
Polubienia
1801
Pobrania
3366
Wydruki
12
Wyświetlenia
54 225
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

GOAL: 
Mount a display (phone in this case) below the monitor in my home office. This display shows my agenda, provides controls for lights, AC and shows temperature/time. In the (near) future it will provide more controls and info.

Versions

  1. Standard bracket
  2. Bracket with one cable guide
  3. Bracket with two cable guides

The cable guides can be used to guide the charging cable of the screen. 
It looks the best using a dark cable with a dark phone and dark brackets. 
NOTE: don't forget to print TWO brackets! :-)

Print setup

  • PLA 
  • 0.2mm
  • 25% infill
  • Bottom/Top solid layers: 4
  • Perimeters: 4
  • No supports needed

Measurements (per 'standard' bracket)
Size: 12.5 cm x 8.4 cm x 3 cm 
Weight: approx 15 grams

Mounting
To stick these brackets to the back of the monitor I used thick transparent 'Nano tape' (doublesided tape). Just search and you will find it. It is removable without leaving residu and can even be re-used. (it really can!)

Background info

  • Phone: Older Redmi Note 9
    • at 35% brightness the power consumption is +/- 1 Watt!
  • Application: Home Assistant
  • Future: push doorbell camera when the doorbell rings
  • Future: display showing (Prusa) 3d print progress
  • Future: push 3dprinter camera when 3d print is ready
     

 

 

 

Tagi