Liczymy pasujące modele…
Shelf bracket (2 versions) I made these cool looking shelf supports. They are 150x75mm in size. There are openings in the pattern to accommodate fastening (with some angle). Be careful when fastening the countersunk screws! I also made a…
This bracket was designed to support the horizontal divider between the drawers if they become damaged. Often the dividers are damaged where they are secured to the sides and the supplied fixings can not secure them. The bracket is…
This model is compatible with the lego system.
Reinforcement/Antivibration bracket for Tenere 700 with TFT dashboard. Designed for www.dr2.cz phone/navigation holders installed with use of mounting kit for World Raid/Rally version (link below).…
I wanted to attach a holder for my favorite build plate cleaner: https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder OnShape CAD Model:…
In my opinion the original bracket is too thin and I didn't feel comfortable with it. So I opened it in Fusion and made it thicker. The Orbitool 2 toolhead board still fits, only the “outside” is edited. I used these settings and printed…
Since you can't use T-nuts on an Ender 3 V2 Neo to install a lineair rail it's required to drill the X-axis profile This bracket centres the linear rail on the X-axis so it can be drilled correctly. Required tools: hand drill 3.5mm drill…
Slide this cable management bracket onto your desk and tuck all your cables up under the desk, or along the back of the brackets. Desk can't have a lip or non-uniform top surface as the clip slides onto the edge of the top surface of the…
Fancy bracket for wifi AP or whatever would fit. To attach to the wall. The beams look like they are coming out of the wall due to a collapse. Print Settings Printer Brand: Creality Printer: CR-6 SE **Rafts:** No Supports: Yes…
Originally design as a Bracket to hold long LED lights I bought online under a shelf, but can be used for various things. It slips over a shelf and it has a tightening screw to hold item inside in place. It was design to fit shelves 16mm…
These brackets are designed to attach sections of EMT (electrical conduit) together for an outdoor project. The OnShape source at…
I downloaded some bracket model long time ago and used it as a source for this one, but I can't find the original link. If you see that it's based on your creation – please let me know, I'll add the link. One screw seems to be enough to…
Small and strong pipe holder for 20mm pipes of all types. Profile feature 3 types of holder with 2 different depths, 1.5cm and 2.5 cm. 1 short, 1 medium and 1 enclosed holder. The mounting holes are 4.5mm. Please print it facing down due…
My printer stand is built from extruded aluminium ftubes and plastic corner joiners. All available cheaply at Bunnings. When the printer gets up to speed the while stand sways back and forward. These brackets make a huge difference in…
A quick fit, 1x1 bracket allowing you to create 90° corner tile multiboards with the quick friction fit connection. Note: This uses Multiboard Tiles and thus their license also applies. Please see https://www.multiboard.io/license
The mounting brackets have 5mm holes for screws. The tenda switch has the following dimensions: - Width: 101 mm - Length: 100 mm - Height: 26,5 mm Happy printing and mounting :)
This is a simple cable management bracket. I used it to organize cables in my studio. I used PETG. 0.2 mm layers. With 20% infill and 3 perimeters, the bracket is firm and flexible enough. Check the drawing for the exact measurements.…
Best printed with standard support, but also possible without supports, brim recommended to avoid warping.
This is a gable mount for the outdoor govee lights square model Print Settings Printer Brand: Creality Printer: K1 **Rafts:** No Supports: No **Filament:** Creality PLA, PLA+ white Notes: The gaps are a bit tight. I am sure you could…
Can be printed in whatever material you want. Bronze filament with light coat of blue/grey stain is looking good… The versions in the pictures is printed in eSUN ePLA Metal Antique Brass
a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…
Under Desk Mounting Brackets For Kensington SD4700P Docking Station And Its Power Supply. 2 Of Each Part Needs Printing. Needs 8 4x20mm General Purpose Screws.
Flush mount design Hidden fasteners to mount the bracket Just press the google unit into place, FRICTION does the rest!!!! (IF your machine runs true to size, just print it.. you MIGHT need to scale in slicer for a tighter fit IF you run…
Wall mounting bracket for a compressor water separator.
We ran out of space on our bookshelf, so now we have to place books in two rows. To make better use of the space, we want to add an extra shelf board a bit lower than the normal book height behind the first row of books. I didn’t want to…
Original document holder must be modified. Use double side tape (or glue) and 4 screw for each side. Print twice (one mirrored) It is for 7 inch 1din radio. Might be used for 2 din (I didn't try it)
I've redesigned pfte bracket with fittings I have at home.
Costco Grabber Holder Wall Mount Hanger Bracket Hang Costco Birdrock Home Grabber Tool handle left or right. Print hanger on back, no supports needed. Works with grabbers under 27mm (see pic). Can attach with command strips, or has two…
Decorative shelf bracket Printed in PLA / 0.4mm nozzle / 0.2mm layer height.
I had to change out the original reverse camera in my WRX as it did not work with the new Head Unit. I purchased a Natika Backup camera from Amazon, which works well, but the method of installation did not suit me, I did not want to put a…
This bracket can be used to reinforce joints in tables, frames, or other furniture. I printed with PETG. 0.24 layers. 3 walls. 15-25% infill. One side is 7cm long , other 3cm.
This is a bracket for a 3/4 inch French cleat system. Autodesk files included and parameterized for other cleat sizes.
Bracket you can use to mount your cooler to your boat.
This GPU sag bracket was designed to fit between any two fans. This makes it perfect for many fish tank cases, but it was designed specifically for the Antec C5. The base secures into the screw alcoves of the fans and brings my Galax RTX…
The old chrome plated brackets had become more corroded than I realised. I didn't want to drill more holes in the tiles so decided to make brackets to match existing. These are the result using Fusion as usual, apologies regarding the…
Helps holding your Coroplast model in place for your props. Will fit 10mm Coroplast models. Printing: Filament: PLA Infill: 15-20% Nozzle: 0.2mm No supports required
A previous owner had cut out the battery bracket on my stupid little sports car to install an Odyssey PC680. When it came time to replace that battery, I opted to install a Yuasa YTX20HL-BS and drew up this bracket to replace the Odyssey…
Part of my collection for furniture: https://www.printables.com/@MichaMietlins_755343/collections/3218237
My towel rack broke so you know what had to happen!
Cable brackets for both a single cable and multiple cables. You can screw these brackets to a surface but also, for example, stick them to a surface with double-sided tape. Set the infill to 100%.
Information Brackets for the more than capable but slightly older CalDigit Dock, the USB C Pro model. Attached are two versions, one for the now discontinued Alex add on unit (monitor shelf with drawers) so it can just be clipped…
Remix of existing brackets but I needed to attach in a spot where I couldn't get behind so had to move the screw hole 90
V1.0 I may need to update this model. But you are welcome to try it out yourself. Most likely, it would just need a slight scale adjustment. V1.1 Added taller slots for cables. V1.2 Moved switch slot 3mm
Bracket to hold a 2020 to the rear frame. Parts needed 4x M5X10mm+ heat inserts 4x M5X50mm BHSC 5x M5X10mm BHSC 5x M5 v-slot nuts. Which ever type you generally use. The bracket with the larger slot goes on top. If you skip the middle…
Tested and works with S-150-12 model. Print in PETG.
Shelf Bracket with Cat Head! For best results, rotate bracket and place on cat head side on bed (see last photo). No supports needed. STL file dimensons: X: 5.5 inches Y: 3.17 inches Z: 7.39 inches STL can be enlarged to any size needed…
I wanted to put my 52Pi ICE Tower Cooling Fan on my Raspberr pi 5 but the brackets were incompatible due to the PoE header. So I made my own. The 52Pi ICE Tower Cooling Fan was originally made for the Raspberry pi 4, but these brackets…
A part that joins the frame sections of a dring rack. The frame rods are approximately 6mm diameter. I printed in PLA but other matrials may suit, even a stiff flex material might work. Print with the top down, basically legs pointing up.
If like me you buyed an a older version, you may noted that is a little more large than the printer, here is the fix
This is was designed for M6 bolts so you can easily mount a power strip to your sim racing cockpit with aluminum extrusions. I attached a photo showing what power strip this is intended for but also have the SKU # - SKU:414078. The holes…
Simple bracket for the Shimano Charger so it can be mounted on a wall. Made to fitt the EC-E6002 Charger Printed with 4 wall loops and 25% infill.…
This is was originally designed to make a target stand utilizing standard conduit or PVC pipe. v2 will work with any 3/4in (19.05mm) diameter conduit or PVC tube v3 is a larger version that works with up to a 1.35in (35mm) diameter tube.…
this is the bracket I use with my flsun T1 pro to hold the spool end of a 21" long piece of ptfe tubing. the center hole needs to be threaded to match whatever QR fitting you choose. I used the SMC KQ2H04-M5A so I threaded it to 5x0.75.…
Rear kitchen drawer brackets, marked left and right, with a .25" lip.
The original model had too small thread for the fitting, this model fixes that
EN: The door wreath, which we had attached with decorative ribbon, kept coming loose because the adhesive tapes were slowly coming off due to the pull. As I didn't want to damage the door by stapling it, I came up with this device. It…
This brackets are replacement parts for your BMW (G20/G21/..) All-Weather Floor Mat and are used to hold the metal inserts around the BMW logo in place. I lost mine during a car wash and this part can't be ordered. I could have only…
This is a bracket designed to be epoxied to the back of the trunk cover on the BMW X3 or X4 to retrofit the trunk strut that was removed in 2019. Took design cues from the OEM part and revised it so that it'd be durable as a print. Should…
PCIe bracket for your PC case to mount a 140mm FAN to cool down your PCIe expansion cards.
This is a computationally optimized shelf bracket, designed around ~100lb (~440N) loads, although I'm fairly optimistic it can hold more than this. When printed vertically, it uses no support material. It is incredibly strong for its…
About the model: Have you got a small desk? Would you rather tuck your keyboard away when not in use? If so, this could be the solution for you! (Actually, it was a solution for my bluetooth keyboard, but you can probably borrow it too).…
Arduino UNO 10" Rack Mount Bracket Panel 2U - Staffa installazione Arduino UNO rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025 Update: added resized models…
I designed this brackets to be used in combination with cheap 15 mm diameter metal 'central heating' tubes to make a filament spool shelf. I used one: 15 mm x 1,2 mm x 2m and cut it in half. I costed me less then € 5. Printed with PLA+…
Make learning algebra hands-on and engaging with this Montessori-inspired bracket expansion puzzle! This physical representation of algebra was designed for upper elementary students (grades 4-6) . The purpose is to use physical shapes to…
2020 Connector 3 Way Corner Bracket EXTRASTRONG _Alu Profile Suitable for: Resize to adjust dimensions Warning: Dimensional Tolerance Notice Please be advised that final print dimensions can vary due to printer settings, calibration, and…
The original model looked great when the other half saw it, and wanted some for the closet. After quickly realizing that our builder selection had only a single top support rod instead of 2, I closed off one in the slicer to test. Close…
My version of spool storage bracket small yet sturdy requires 2 screws per bracket requires at least ½" x ½" aluminum or ½" x 1" wood
The Linkup PCIE 5.0 riser cable is not compatible with the original bracket that comes with the Sliger SM580/SM570. The mounting holes do not line up. I decided to design my own bracket that will fit the Linkup riser cable. The holes to…
this part is to repair the mounting clips on the stock solenoids which are prone to snap off. the intent is to glue these to the solenoids for retention. These mounts do make the solenoids a bit wider so you can't use two of these next to…
Printed flat on the bed with no supports. The 3 holes for the wallmount are 5mm. The 2 holes for the shelf are 4mm. It has an overall dimension of 250 x 220 x 23mm. Printed mine in Extrudr PLA NX2 Matt. In the pictures I used a 30cm wide…
This remix of the Modular 19" Rack Mount modifies the 1HE brackets by adjusting the mounting hole width for improved fitment. With these changes, the brackets should now also be compatible with 10" racks, expanding their usability beyond…
Super simple design, easy to print, easy to use. Drill a 8mm hole in the shelf to hold it
This goes into an aluminium rail and fastens a 12v lamp to it. Has a tendency to break. Print in something durable.
Under-bench Clamp Storage Bar Bracket Description Bracket to place bar under workbench to store workpiece clamps. Materials Filament Support me by using the affiliate links below PLA Filament https://amzn.to/40DZX17 ABS Filament…
Heavy-Duty mount for the Yellow Jacket 3 outlet 12 gauge “contractor” extension cord. May fit other similar designs. It accommodates #8 wood screws, including cabinet/washer head screws. Printed in PETG. Model is designed to print with…
Description The bracket is designed to hold the RODRET switch in position during operation. The original holder with the magnets was not strong enough and the switch broke apart after falling down. You can slide it into the holder from…
print as shown in the picture, use of Trees (Organic) with support to bed only works best
Raspberry Pi Zero DIN RAIL Mount Bracket - Staffa installazione Pi Zero su barra DIN 7.5mm Suitable for: DIN RAIL 7.5mm IEC/EN 60715 TH 35 - 7,5 https://www.printables.com/model/885933-desktop-din-rail-stand-7590-degrees-supporto-barra…
not tested yet will do shortly made it for myself to use for dartboard led surround hope it works okay
This bracket allows you to mount a ER6 or ER8 in places where double sided tape may not be reliable. An STL file is included If you want to tweak it using OpenSCAD: Using OpenSCAD download OpenSCAD https://openscad.org/downloads.html open…
This is a 3x2 beam bracket that allows Lego Technic arms and parts to change 90 degrees. It's useful for building Botball robots when a sensor needs to point down or some part needs to change directions on your model. It can be printed in…
I made those models to help stabilize the GPU and give a solid base for the PCI-E raiser to stand on. It also looks better than the brass standoffs and use m3x6 screws. PCIE-Standoff: Fit flush under the raiser bracket.…
PETG with PLA supports. crutch2 has a little looser tolerance, as the first version fit a little tight.
With this bracket, you can mount the Raspberry Pi Camera Module V3 onto a surface. Initially designed for the Pironman5 case . ------ SunFounder Pironman 5 is an advanced mini PC case designed specifically for the Raspberry Pi 5. It not…
Creality Falcon 2 40W Laser Crosshair Bracket Should fit all the Falcon models. Used this as inspiration:…
I modified the original bracket by increasing the back section as I need more fill for my closet rod to get into both sides of my closet.
Jednoduchá rohová konzola s rozmermi 43 x 43 x 43 mm. Rozmer vnutorneho otvoru 8,8 x 22 mm. Ak sa ti model páči klikni na lajk (srdiečko) a keď ho vytlačíš odfoť a daj hviezdičky. Ďakujem. Simple corner bracket with dimensions 43 x 43 x…
The model is a holder for a wireless charger for the iPhone XS. Thanks to it, my children can place their phones down be
Deck Post bottom bracket This deck post bottom bracket is to make decorative edge around new 6 x 6 deck posts, where it enters the stone patio. i did not want them out of wood, due to rot, etc. i designed them to have all rounded corners,…
Label holder for interchangeable labels/signs of crates. Halterung für austauschbare Beschriftungen/Schilder von Kisten oder anderen Behältnissen.
E N G L I S H Accessories for 50 mm brackets and 28 mm curtain rods 1x 5 mm spacer small 1x 5 mm spacer large 1x 3 mm extension for spacer 1x connector for curtain rods, rigid 1x connector for curtain rods, for sliding These parts are…
German: Halterung für den Einbau in einen Heizkreisverteiler ohne Hutschiene. Platz für 16 Wago-Klemmen = Zuleitungsverteiler, 6 Räume und 11 Heizkreise. English: Bracket for installation in a heating circuit manifold without DIN top-hat…
A wall mount that I made for the Tripp Lite PDUMV15 Power bar. I included wall 2 screw holes, but you really don't need to screw them both in, it's a bit over kill.
This bracket is similar to already commercial available metal brackets on the market, with an addition of a extra hole for using zip-ties to secure the PTU-cable. with this you can move the PTU from the scorching engine-bay to the front…
This is a simple bracket that allows you to mount your AstroAI multimeter in any type of clamp. This was created for the DM2000, but should work for other models
In an effort to improve the signal quality to my Soliom BF08, I designed this bracket to relocate the antenna to the side of the feeder. The result is a huge increase in signal, since there’s no longer a sizable metal box interfering…
