IKEA RODRET bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Description
The bracket is designed to hold the RODRET switch in position during operation. The original holder with the magnets was not strong enough and the switch broke apart after falling down. You can slide it into the holder from above. Simply stick it in place where you need it using double-sided adhesive tape. The back has a “Swiss edge” so that it doesn't look too bulky when looking on it from the side.
Printing
There is nothing special to consider when printing. I printed the holder with a 0.6 mm nozzle and 0.2 mm layer height on my Prusa MK4S with PLA. Any other material should also work.
Fit
In my case, it has a perfect fit. It should cover possible production tolerances.