A-Frame Bracket for Conduit or PVC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Similar to my A-Frame bracket for normal 2x4's, I was asked to make a version that utilizes conduit or PVC pipe as well.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is was originally designed to make a target stand utilizing standard conduit or PVC pipe.
v2 will work with any 3/4in (19.05mm) diameter conduit or PVC tube
v3 is a larger version that works with up to a 1.35in (35mm) diameter tube.
This can be used for a multitude of purposes besides being a target stand such as being a stand for spray painting.
I recommend printing with at least 4 walls, and an infill of 20%. My first test is with PLA, however if you plan for this to stay outside, a more weather and UV resistant filament would be recommended.