P
Printables
Light-Duty EMT Conduit Bracket
These brackets are designed to attach sections of EMT (electrical conduit) together for an outdoor project. The OnShape source at…
Wyniki wyszukiwania: conduit
Liczymy pasujące modele…
P
Printables
Single and Dual 16mm Conduit Wall-Mount Holders
For mounting behind walls, these holders are designed to securely support one or two 16mm flexible conduit tubes. Each slot includes an inner lip to ensure the conduit remains firmly in place. Including a drilling template for the dual…
P
Printables
A-Frame Bracket for Conduit or PVC
This is was originally designed to make a target stand utilizing standard conduit or PVC pipe. v2 will work with any 3/4in (19.05mm) diameter conduit or PVC tube v3 is a larger version that works with up to a 1.35in (35mm) diameter tube.…
P
Printables
Double Pipe clip - Conduit Clips - Ø 16 / 20 / 25 / 32 / 40mm - Clips Fissatubo Aperto Doppio
Pipe clip Ø 16 / 20 / 25 / 32 / 40mm, Double - Clips Fissatubo Aperto Doppio For fast installation of RNC, flexible & rigid conduit Suitable for: x2 Ø 16mm x2 Ø 20mm x2 Ø 25mm x2 Ø 32mm x2 Ø 40mm Resize to adjust dimension All our designs…
P
Printables
Cable gland adapter for corrugated conduit.
Convenient adapter for connecting corrugated conduit (iD 17mm, oD 21.5mm) with Haupa PG-16 cable gland. Printed without supports. You can use the zip ties to additionaly secure the conduit.
P
Printables
suporte guia de conduite lefty
suporte para conduzir mangueira d freio na suspenção de bike modelo lefty 1.0
P
Printables
N connector antenna adapter to 20mm PVC conduit
A simple adapter which fits a male N-connector (or Type-N connector) and a 20 mm PVC conduit. I use it for making Meshtastic antennas, one of them can be seen installed on a solar node. Easy to use: Print in PETG, completely solid, wide…
P
Printables
G3 / G5 Flex Conduit Mount
3/4" conduit mount for the Unifi G3 /G5 flex camera. Slide the mount onto the conduit until it hits the stop lip at the bottom. It's a decent friction fit but I included a hole to secure with a self tapping screw at the back. I used the…
P
Printables
M20 conduit mounting bracket
Purpose Mounting M20 cable protection conduits for electrical installations and cable management. Prevents sagging and ensures a clean, parallel routing of cables. Features Clip mechanism: The conduit snaps into place and is held…
P
Printables
Electrical conduit plugs and reducing sleeves
I made these plugs and reducing sleeves for electrical conduits to measurements in the international system. The plugs are for 90mm, 75mm and 40mm ducts. The reducing sleeves are 20-40mm and 20-25mm. Recommended printing in PETG minimum…
P
Printables
Electrical locknut for 3/4 in conduit
This is a model of the electrical locknut that fits a 3/4 in conduit. DO NOT ATTEMPT TO USE THIS FOR ELECTRICAL WORK. It is likely not strong enough and definitely not up to code. Still, if you get stuck in a situation where you need…
P
Printables
Cable gland M32-29mm conduit flex pipe
Cable gland size M32 to connect a 29mm conduit flex pipe. Added several locking clips: regular clip same but with notches if you want to secure it with a ziptie higher version I've made the diameter 28.7mm for a tight fit for my used…
P
Printables
29mm conduit flex pipe feed through
Mounting plate to feed though 29mm conduit flex pipe. Uses the same locking clips as my M32-29mm cable gland model. I've used the dual version, but uploaded a single version too. I've made the diameter 28.7mm for a tight fit for my used…
P
Printables
DeWalt (& 1.25" OD) Vacuum to 1" Conduit adapter
This is a set of 4 simple adapters to connect a DeWalt Handheld Vacuum (or other similar vacuum with a 1.25" outer diameter accessory diameter) to a piece of 1" Schedule 40 PVC Conduit. A simple friction fit will create a (sufficiently)…
P
Printables
2" to 2-3/8" (60mm) Conduit Mount
A cap/mount for 2" electrical conduit to sit snugly in a 60mm hole. I didn't have much black filament which is why the photos show a black + white combination. Prints without supports. Conduit I used Hole saw (came with hole covers I…
P
Printables
IKEA BILLY Shelf Cable Conduit
This is a simple model to allow you too route cables through the back of your IKEA Billy Shelf. You should be able to route 2 normal sized US cables through the hole and a bunch of little other cables. Scale the X and Y to 125% if you…
P
Printables
Parametric Wall Conduit Plug - for 1 and 2 cables
Fully parametric wall conduit plugs. Two models; one cable and two cables. The plug is very useful when you want to route cables through wall conduits, but you do not want to make a permanent installation using, for example, silicone to…
P
Printables
1/2" EMT conduit accessories
This is a combination of 1/2" EMT conduit hardware that ive made for various projects. All parts with screw holes are made to work with M3 hardware and 5.5mm square nuts. The ID of the splined holes in these fits snugly on the tubing. If…
P
Printables
Ring Curtain Bracket for 3/4" EMT Conduit
We have a patio door where we have sheer curtains. The wife wanted to block some of the light and so she got a 50% blackout ring curtain. The idea was to hang the blackout curtain behind the sheer curtains where she could draw it or move…
P
Printables
Creality Ender Enclosure Bowden Tube Conduit
This is a very simple little model which allows for routing a PTFE tube ("bowden tube") from the outside to the inside of a Creality Ender enclosure, or any other fabric enclosure for that matter. A use case I have found for this is to…
P
Printables
GRÅPPA – Minimal Conduit Clip
Clean, minimal clip designed to improve the look of exposed electrical conduit. Simple, robust and easy to print. ✔ Clean design for visible installations ✔ Reliable grip ✔ No supports needed Standard sizes (16mm, 20mm) included.…
P
Printables
T Connector - EMT Conduit
This is a TPU printed connector that is a T connector for EMT Conduit of various sizes. More will be added as they are created/needed. Print it as it stands and there should be no need for supports. Designed by Free.
P
Printables
Godesic Dome Corners for 1/2 " conduit
Godesic Dome Corners for 1/2 " conduit Cut equal lengt conduit and assemble. Base pieces allow straight reiser. Not a jungle jim Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill:…
P
Printables
7mm Cord Conduit
Simple cable conduit for 6.5mm-ish cable. Printed on the K1 as oriented with supports just to be safe, they broke off easily.
P
Printables
Pipe clip - Conduit Clips - B Type - Ø 16 / 20 / 25 / 32 / 40mm - Clip Fissatubo Aperto
Pipe clip - Conduit Clips - B Type - Ø 16 / 20 / 25 / 32 / 40mm - Clip Fissatubo Aperto For quick installation of: RNC conduits Flexible & rigid tubing Available for the following diameters: Ø 16mm Ø 20mm Ø 25mm Ø 32mm Ø 40mm Features: 🟢…
P
Printables
simple end cap to cover the open end of 1/2 inch and 1 inch conduit
End caps are designed to match these EMT conduits from Lowe's https://www.lowes.com/pd/Metal-EMT-9-98-ft-Conduit-Common-1-in-Actual-1-163-in/5013672209 https://www.lowes.com/pd/Common-1-2-in-Actual-50-In-Metallic-Emt-10-ft-Conduit/3129551
P
Printables
EU / PL Electrical conduit fitting for junction box
Built to replace hard to get conduit junction box connectors. In PL these are only found in specialist shops and these also can be a bit expensive. This design uses nylon ziptie as a compression, to provide very tight fitting. For now I…
P
Printables
Ender 6 improved extruder cable conduit bracket
Thumbnail curtesy of Saryk A replacement bracket for the supplied cable reinforcer on the Creality Ender 6. Use PETG for best results. The Bowden clip may snap if printed in PLA. V2 update: Includes minor optimisation, to set back the…
P
Printables
Rod Holder - 3/4'' conduit
Rod holder for installing ¾ conduit for filament rack. Simple and Basic. Can be utilized for numerous other applications. I mounted 6" from wall. If mounted under shelf will need to be 8'' below shelf for most spool types.
P
Printables
Conduit Cap for Garden Fencing
I use ¾" EMT Conduit on my raised bed gardens to hang fencing on. Whipped up a cap for the top of the conduit with a small hook to hold up the fencing.
P
Printables
Wall clip for 16mm flexible conduit
If you liked my model buy me coffee at https://ko-fi.com/vestalux
P
Printables
Flexible conduit holder 29
Recomended print: Layers: 0.2 Perimeters: 4 Infill: 10% gyroid Materials: By location… PLA, PetG, ABS, ASA (tested with ASA)
P
Printables
Flexible conduit holder 20
Recomended print: Layers: 0.2 Perimeters: 4 Infill: 10% gyroid Materials: By location… PLA, PetG, ABS, ASA (tested with ASA)
P
Printables
Conduit wall guide to perpendicular
This mount guides your conduit to a position perpendicular to the wall with a minimal bend. Great for fixation of a cable conduit before applying an insulation layer Not sure if anyone is going to need this because I made this for a very…
P
Printables
Flexible conduit holder 40
Recomended print: Layers: 0.2 Perimeters: 4 Infill: 10% gyroid Materials: By location… PLA, PetG, ABS, ASA (tested with ASA)
P
Printables
Wire Conduit Mount
This mount fits 15mm wire conduits and helps keep your 3018 CNC machine’s wiring organized.
P
Printables
Light-Duty EMT Conduit Bracket
These brackets are designed to attach sections of EMT (electrical conduit) together for an outdoor project. The OnShape source at…
P
Printables
Surface mount 20mm cutout templates conduit and stuffing gland
I designed these to do a workshop re wire that required the use of plastic back boxes along a benched workspaces. A lot of back boxes of this type do not have 20mm knock outs in them and as I also like to use 20 mm nut and flange fittings…
P
Printables
X-way Connectors for Plastic Conduit
Connector to assemble plastic conduit tubing into a frame to be used e.g. for kiddie caves or shelfes. Put together a cubic frame like shown in pictures, throw some blankets over it et voilá yaou have a cave for your Kids and they dont…
P
Printables
Universal EMT Conduit Wall Hanger
This mounting bracket is designed to securely attach 3/4-inch EMT conduit to a wall using #8 x 1-1/4 inch screws. It's a versatile solution for creating custom pan hangers or other wall-mounted storage systems, offering a sturdy setup for…
P
Printables
Roof Rack Conduit (Pipe) Clamp Bolt Holder
A small accessory to hold the hex head of the conduit / pipe clamp in place so it can easily be tightened from the other (more accessible) side using a single spanner / wrench. This is based on the 'Rola Conduit Carrier Kit for 100mm…
P
Printables
3/4 EMT Conduit Wire Cutter Hanger
My 3D printer cabinet is made from ¾" EMT conduit and I was needing a handier place to store my flush cutters rather than “I forgot where I put them." This uses 2x M3x8 screws. Don't over-tighten.
P
Printables
Conduit pipe straps - 2", 1 1/2" & 1". For schedule 40 PVC conduit or pipe.
These are simple conduit straps for schedule 40 PVC conduit or pipe. Sizes for 2", 1 ½" and 1". Best printed with PETG or ABS. Each file will print 2 straps. Will also work on ABS pipe. Note: For best results when attaching these to the…
P
Printables
Sonoff Basic, inline case for 20mm conduit
I needed an outdoor enclosure for my aquaponics pump timer/controller using a simple Sonoff Basic. This slim case suits 20mm conduit fittings allowing me to insert the timer/controller inline with the existing 20mm plastic conduit. There…
P
Printables
Holder for twelve 16mm flexible conduit tubes
Each tube slot has an inner lip to ensure the conduit stays firmly in place. The bottom part is first screwed to the wall, and the top part then secures everything with screws that pass through both parts and into the wall. Made for 3mm…
P
Printables
Single and Dual 16mm Conduit Wall-Mount Holders
For mounting behind walls, these holders are designed to securely support one or two 16mm flexible conduit tubes. Each slot includes an inner lip to ensure the conduit remains firmly in place. Including a drilling template for the dual…
P
Printables
20mm conduit Y-splitter
20mm conduit Y-splitter I had 1 empty conduit to inside the house, and need to connect 2 seperate conduits to it in the yard. Therefore I designed this Y splitter.
P
Printables
1" ID EMT Conduit Plug
I mostly deburred my pipe-cutter cut pipes, but there was still a bit left to make it narrower, so this is 25mm instead of 25.4mm ID. It will be a little loose on factory cut ends. If it's too tight/loose, you can scale it in your slicer,…
P
Printables
Corner connectors to create a triangle out of 1/2" EMT conduit
This are connector pieces to create a 75 degree corner and a 30 degree point to connect 1/2" EMT conduit into a triangle frame. The bottom corner has a hole to accommodate a ¼-20 bolt in it so that you can cross drill your conduit at 1 "…
P
Printables
GE Singing Bulb 30" - 20mm Conduit Mount
https://buildalightshow.com/search?controller=search&s=Singing+Bulb+30
P
Printables
Rounded 25x16mm conduit connectors
Parametric model to create joining parts for 25x16mm cable conduit. Use the model at…
P
Printables
3dsets Rancher protective conduit for wires from the tail LED light
I wanted to safely stretch wires from tail LED light to receiver/lights unit. This conduit is placed at the bottom side of the wheel house and connects the side where tail light is installed with interior of the car. The only tricky part…
P
Printables
Half inch conduit cap for RepRack
After building a dual-level RepRack in a storage room, I noticed that the conduit ends on the lower rack were a little too close to the door for comfort. I didn't find a good ½" cap, so I sketched them quickly in F360 and tried a couple…
P
Printables
Free-moN Leg Pockets for 1/2" EMT Conduit
These models are designed to add 1/2 EMT conduit legs to Free-moN or Free-mo model railroad modules. They use a brass tapered heat-set insert part number 93365A312 from McMaster Carr.
P
Printables
MPCNC - Universal Bracket for Long conduit
MPCNC Bracket for Long Conduit : It is really advisable to install bracket when your conduits are longuer than 80cm to avoid chattering. Compatible with 5/16 US or M8 ISO EU Threaded shaft and nuts Conduit Diameter adapter for 23.5mm,…
P
Printables
20 mm pipe conduit clip
Simple model - easy to print - retains pipe or conduit such as 20 mm PVC electrical conduit or air conditioning drain pipe. Print in PETG or better: PLA is not good enough. Duplicate model in slicer and print dozens so you don't have to…
P
Printables
Pipe Cutter for 20mm PVC Conduit
I love the original model of this tool. I have added three enhancements to hopefully improve functionality. Unfortunately I have not very good with F360 so I have only added the modifications to my settings for 20mm PVC conduit. Maybe…
P
Printables
IKEA VALLHORN Ø18 mm Conduit Clip-On Mount
I recommend printing in PETG. Set perimeters to 5, infill to about 20-25%.
P
Printables
A-Frame Bracket for Conduit or PVC
This is was originally designed to make a target stand utilizing standard conduit or PVC pipe. v2 will work with any 3/4in (19.05mm) diameter conduit or PVC tube v3 is a larger version that works with up to a 1.35in (35mm) diameter tube.…
P
Printables
RAM Conduit arm 25mm Ball
Print two. Add an m6 nut to each. Cut a piece of 20mm conduit to length - I used PVC. Steel may work for increased strength. Insert prints into ends of conduit. Screw a suitable length of m6 threaded rod through and tighten. I found a…
P
Printables
Electrical conduit 1/2 inch 90 degree joint for 3 tubes
A joint that fits on the inside of a 1/2 inch electrical conduit pvc tube, ideal to make quick connections and light builds or temporary structures
P
Printables
16mm conduit entry insert for ABB HAF Cable box
Might only be applicable for the Dutch market, but this is a printable version of the ABB HAF cable box insert . The 3mf file has auto generated supports enabled for the object.
P
Printables
Conduit connector (PVC tube)
Has a little ridge in the inside to prevent conduit from passing through. Can be printed on the side without supports. How snug the fit is depends a bit on the material you use. I printed mine in PETG for a good fit. If too loose or too…
P
Printables
Hook for 25mm diameter electrical conduit-ziptie
Hook for 25mm diameter electrical conduit, 25mm diameter electrical conduit hook with space for zip tie. I've added the solidworks native for modification as well as the step enjoy!!
P
Printables
Hook for electrical conduit Ø10/12/16/20/25/30mm
Hook for electrical conduit Ø10/12/16/20/25/30mm modification as well as the step and solidworks files.. enjoy!!
P
Printables
Under Table Cable Conduit Manager
Cable Conduit Manager for Hiding Cables - Modular Design Must be mounted to underside of desk with screws. M4 Holes already added. Print Left, Right parts. Middle parts optional, for extending the cable Conduit. Suggested to use 0.6mm HF…
P
Printables
MPCNC "C" 3/4" Conduit Endcap
I saw endcaps for other builds for MPCNCs in other pipe sizing so I wanted to make an endcap of my own to share with other builders. It's a nice addition to keep the dust out of one more place and to make the machine look a little bit…
P
Printables
Slim Conduit
Print in spiral vase mode. Suggested extrusion width for external perimeter extrusions is 0.6mm, as the thickness of the conduit walls is exactly twice that. I stick it to the wall with Gorilla™ putty.
P
Printables
Bracket for hanging 40mm Metal Conduit
Here in the US galvanized metal electrical conduit that measures 1-¼" in diameter aka 40mm is ideal for hanging clothes hangers in a closet for example. These heavy duty brackets allow for easy and aesthetic attachment to conduit to…
P
Printables
Double Pipe clip - Conduit Clips - Ø 16 / 20 / 25 / 32 / 40mm - Clips Fissatubo Aperto Doppio
Pipe clip Ø 16 / 20 / 25 / 32 / 40mm, Double - Clips Fissatubo Aperto Doppio For fast installation of RNC, flexible & rigid conduit Suitable for: x2 Ø 16mm x2 Ø 20mm x2 Ø 25mm x2 Ø 32mm x2 Ø 40mm Resize to adjust dimension All our designs…
P
Printables
Prusa XL Enclosure Front Conduit
I added a second LED strip to the left-side of the enclosure and needed a way to power it. Easiest way was a short connector from the right-hand LED strip across to the left. I didn't really like the cable anchors and zip ties for this…
P
Printables
3/4 EMT Conduit Clothes Hanger
Hello, I made this model primarily for myself since I needed some cheap clothes hanger bars and had plenty of ¾ EMT sitting around. This solved a problem for me, I hope it can help you as well, enjoy! You will need to supply: ¾ EMT…
P
Printables
Small Conduit Puller Tool
Small Conduit Puller Tool - for pulling small wire through corrugated split loom Was designed to be used to pull fiber optic cable through 3/8 tubing, but could be used for other things. Print settings: 0.4mm nozzle 0.2mm layer height 3…
P
Printables
Conduit Clips
2 sizes conduit holder clips for PVC Conduit d = 16mm. Mounted using screws d = 3 mm or d = 4 mm :)
P
Printables
Conduit Clips
2 sizes conduit holder clips for PVC Conduit d = 16mm. Mounted using screws d = 3 mm or d = 4 mm :)
P
Printables
Prusa XL cable management conduit (horizontal)
Chopped up the little twist-in T nuts that hold the steel sheets onto the XL frame, and made them into hooks to hold a cable tray that'll tidy up the rats nest of wires that emerges if you decide to side-mount your xLCD like I have. (I'll…
P
Printables
Cable Conduit for Project Car
So I made this cable conduit management system for my car, uses 2xM7 bolts to secure each piece of conduit against movement, I will be drilling and inserting Rivet Nuts into the car to bolt them to There are also units to use that can be…
P
Printables
Cable Conduit Tool
Tool to help you pass cable into conduit, including cables that are in-situ without re-running from one end Filenames are conduit size in mm
P
Printables
1/2 conduit T
I designed this model to clean up the corner where my filament racking conduit meets. Fits US standard 1/2inch conduit with an outer diameter of 18mm and inner of 15.5mm Petg 3 walls 15% infill
P
Printables
Reolink - POE Door Bell - 45deg Conduit mount
45 deg mount for Reolink POE bell with top hole to accommodate a threaded compression fit adapter for 20mm conduit as to allow it to friction fit/self tap as it is screwed in.
P
Printables
Electrical PVC Conduit Clip 20mm
This is a 3D printable 20mm clip designed for securing standard PVC electrical conduit or similar plastic tubing. Ideal for organizing wiring, building clean cable runs, or DIY electrical projects. It snaps onto 20mm outer-diameter pipes…
P
Printables
The KillaKwads Conduit Whoop Gate Project (UPDATED FOR 2025)
Welcome to the 2025 The KillaKwads Conduit Whoop Gate Project new gates drop!! Featuring a bunch of new parts and a bunch of updates and upgrades. What will YOU create with these new parts? Back in the long long ago Luke Turner designed a…
P
Printables
Conduit Outlet Body Hub Style
Conduit Outlet Made in Fusion 360 Print instructions Unassociated tags: Conduit Outlet Category: 3D Printing
P
Printables
Cable Insertion Tool for split wire conduit
Inspired by the Extrutim model: https://www.printables.com/model/473485-cable-insertion-tool-split-wire-loom-tubing I designed it for mounting the Prusa Core One kit. This one is slit on the side to easily insert the electrical wires. On…
P
Printables
Atomstack B3 conduit latéral 2 pièces extraction
Conduit découpé en 2 parties pour pouvoir s'imprimer sur des imprimantes de taille plus modeste
P
Printables
Conduit clip fixtures
English For electrical installations in the building, where cables are to be laid on plaster, lightweight construction or board walls, these usually need to be protected inside a cable duct or cable conduit. I have designed these brackets…
P
Printables
Smurf Tube 1" Flexible Conduit Clip w zip tie
Clips for securely mounting 1" corrugated smurf tube conduit throughout my attic. Includes: Screw hole for securely mounting to walls or rafters Snap together multiple clips for parallel runs Zip tie channel for securing the conduit to…
P
Printables
3/4" conduit wall mounting bracket left/right
3/4" conduit wall mounting bracket left/right
P
Printables
Cable Gland for 20mm Electrical Conduit Adapter
This is a custom-designed adapter that fits into a standard M25 cable gland opening on an electrical enclosure or control cabinet wall. Instead of holding a cable, this part is specifically made to hold a 20mm (outside diameter)…
P
Printables
Cable gland adapter for corrugated conduit.
Convenient adapter for connecting corrugated conduit (iD 17mm, oD 21.5mm) with Haupa PG-16 cable gland. Printed without supports. You can use the zip ties to additionaly secure the conduit.
P
Printables
Big Tree Tech Endstop Mount for 1/2" EMT conduit
Needed a mount for some Big Tree Tech Endstop Mount for 1/2" EMT conduit for Piper 1 3D Printer. Printed .20 resolution, 2 perimeters, 30% infill. Need x3 6-32 x ½" Phillips Head Screws x1 6-32 x ¾" Phillips Head Screw x2 6-32 Nyloc Nuts…
P
Printables
Print in Place Flexible Conduit Fitting.
This fitting is for connecting a 32mm (outer diameter), square grooved, flexible conduit to a panel or equipment rack. Just because I wondered if this was possible, although it would be easier and cheaper to buy some from an electrical…
P
Printables
1.25 inch Oval EMT conduit junction box cover+gasket
I broke the cover on the 1.25" conduit junction box going into my shed. All the new boxes seem to be rectangular, and I couldn't find any replacement parts online, so I drew one up in FreeCAD. Included are the body and gasket. I happened…