20mm Cable/Conduit Clips for Ford Transit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
20mm total diameter cable or conduit clips based on the originals designed in my Ford Transit to clip to 2mm steel body.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 97
- Wydruki
- 1
- Wyświetlenia
- 546
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Hello!
My first upload and I hope it helps someone :)
These are some clips based on the original ones within my ford transit, used to just clip onto some 2mm steel bodywork. They hold tightly onto any cable or conduit less than 20mm in diameter, although can fit something larger too.
I just printed them in PLA with the following settings on my Ender 3 V2:
| Layer Height | 0.32mm |
| Wall Line Amount | 3 |
| Infill Density | 100% |
It of course requires no supports, and truthfully I'm very much a beginner so I'm sure there could be a way to print them faster or also not 100% infill but due to the size I felt it would probably be quicker and also just stronger!