1 / 5
G3/4" Screw Thread to 20mm Metric Conduit Coupler (UniFi Protect Camera Backbox / UACC-Camera-CJB and others) — zdjęcie 1
1 / 5

G3/4" Screw Thread to 20mm Metric Conduit Coupler (UniFi Protect Camera Backbox / UACC-Camera-CJB and others)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This part allows you to use standard 20mm conduit with (among other things) UniFi Protect Conduit Boxes (G3/4")

Ocena
5 / 5
Polubienia
7
Pobrania
123
Wydruki
1
Wyświetlenia
755
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

We were so keen to get installing our UniFi Protect G5 Dome Ultra cameras with their shiny backboxes, then realised that getting hold of G ¾"-threaded Conduit is a bit of a pain in the UK.

We wanted to use standard 20mm PVC conduit, which can be easily bought, and so, an idea was formed! We would 3D print a screw adapter.

Thankfully, GibonArt had designed something similar for Hikvision backboxes, but had intended to use PG9 threads, which I believe to be around 12mm.

We added a negative modifier in blender, and arrived at the part we have today:

Print Settings:

I have a Prusa Mini+:

  • 0.20mm SPEED ** Modified:
    • Fill Pattern: Concentric
    • Top Fill Pattern: Concentric
    • Bottom Fill Pattern: Concentric
    • 70% Infill
  • Prusament PETG
  • Input Shaper

 

Tagi