MPCNC Primo C-23.5mm Conduit Plugs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A plug for the MPCNC Primo C-23.5mm CNC machine to keep cables from getting snagged on rough cut conduit.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 508
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I am currently building a MPCNC Primo using 3/4in EMT conduit which is the C-23.5mm version on the @V1 Engineering site. You can find more info about the MPCNC at https://docs.v1engineering.com/mpcnc/intro/, and the files are available at https://www.printables.com/model/39699-mostly-printed-cnc-primo-c-235mm-mpcnc.
I wanted to run some of the cables through the conduit used for the rails, but was a little worried about it rubbing over time on the rough edges. This plug makes the ends look a little sleeker with the added benefit of still being able to route cables through the conduit.
Print Settings
Layer Height: 0.20mm
Infill: 15%
Filament: PLA