Liczymy pasujące modele…
0,2 layer Plastic Stencil for Wall DIY, Scrapbooking, Embossing and Card Making - Art Supplies Stencil Running Horses . It is easy to use a pen and paper, or a paint roller, to apply a picture to a T-shirt, wall or anything else. The size…
Design inspired by pieces assembled to create minimalist paintings and ornaments. Print them in different colors or materials and personalize every detail. The only limit is your imagination! Share your designs and creations in the…
Spray priming the Ultimate Showdown Board looked like a nightmare, with the small tiles flying around in the wind or under the force of the spray paint. I designed this set of helpers to hold the tiles in place so they could be primed…
Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm Filaments Used: PLA+ Anycubic Black Transmission Distance: 0.3 PLA+ Anycubic Grey Transmission Distance: 2.2 PLA+ Elegoo White Transmission Distance: 5.4 This…
Here is a simple Hueforge for everyone of a Knight. The “original” Artpiece was AI generated and i put it in Hueforge If you own a simple printer like me who can only support one fillament at a time, use the custome gcode in your Slicer…
Alle Seiten der „Pyramide" sind gleich lang, somit ist ein Ausrichten nicht notwendig. All sides of the “pyramid” are the same length, so alignment is not necessary.
Store eight minis during painting based on my magnetic tops for the Redgrass painting handle . There is also a rack to combine 3 of the bases for easy transport. Glue 5x2 mm magnets at the top of every stem to harness the power of magnets…
Slip these jigs onto the 3mm stainless steel wire and slide it into the holes where the wire enters the wooden balustrade upright then paint the upright without getting paint on the wire. Printed with minimal infill in PLA (using the…
This model is a painting staining stand designed so that you don't have to miss any spots while spraying, and so that you don't set a wet side on your surface and ruin your paint job. Its about 6.25 inches wide and 8 inches long (between…
Customize This model is parametric - it's designed for customization. You can easily change parameters like lenght, width, angle, tolerance in Fusion 360 . If you don't have this program , you can choose from one of the examples I've…
Hardware Needed: (1) 1/4x28 Bolt - 1.5" or longer (1) 1/4x28 Nut
Wet palette for standard melamin sponge. Dimensions for 6x10x2cm, can be bought on Aliexpress. Best to print in 2 different colors, probably gray/white and yellow/orange, though can be whatever you want. Features: Paper tray/storage that…
Disponible avec ou sans rebord ------------------------------------------ Available with or without rim
Magnetized tops for Redgrass painting handle with grooves for 50 mm bases. Requires 8x3mm magnets. There are also storage plates available to manage your minis during paining. Attention: Since the 50 mm bases are too big, the rack for…
Unleash your creativity with the Blade Valkyrie Painting Miniature . This dynamic warrior figure, armed with a sword and shield, captures the fierce spirit of a Valkyrie in battle. Designed for hobbyists, painters, and collectors, it…
This 3D-printed jewelry-making assistant is designed to make painting and assembling handmade wooden bead jewelry easier, cleaner, and more organized. The design features three useful sections: 1. **Painting area:** A board with 14 holes…
Anya Spy x Family, Can be printed in 3 parts seperated to be painted with acrylic.
I am having issues with my printer and cheap filament and I'm using the last of the ABS I have in the color she wants. I would suggest printing in a easier to work with filament such as PLA or PETG so that you will not need brim like I do…
A simple tool designed to help make painting eyes on garage kits easier, more comfortable, and more dust-free. Simply choose the hole size that is closest to the peg of the piece, then insert along with some blue tack or clay to get the…
I'm presenting a Japanese-style painting. It is made in three colors on a monochrome 3D printer. If you want to try yourself as an artist, you canarrange the color replace ment by layers yourself. Believe me, it's a very interesting and…
Please be carefull when using because it might break under stress. If your children are very playfull and active I would recomment to print it double the normal height to make sure its strong enough.
I’ve been looking for a perfect paint brush holder and organizer for ages. I printed and tested a lot of them, but none of them stayed on my desk for long. This one finally fits my needs - it’s exactly what I was looking for. It might not…
Please be carefull when using because it might break under stress. If your children are very playfull and active I would recomment to print it double the normal height to make sure its strong enough. This is number two of my painting…
You can find part 2 here: https://www.printables.com/model/1577880-painting-stencil-alphabet-part-2 Please be carefull when using because it might break under stress. If your children are very playfull and active I would recomment to…
You can find part 1 here: https://www.printables.com/model/1577875-painting-stencil-alphabet-part-1 Please be carefull when using because it might break under stress. If your children are very playfull and active I would recomment to…
This model is a fit for the Seeed Studio 13.3" Spectra 6 E‑Ink screen with a Seeed Studio XIAO ePaper DIY Kit EE02 controller and a 2500 mAh LiPo battery . It allows the screen to fit nicely in an IKEA Lomviken 30×40 cm frame without…
I was dissatisfied with the other painting pyramid models, that were needlessly hard to print. I designed this painting pyramid with larger base to be both sturdier and to not warp on the print bed. I designed it with PETG in mind and…
Many years ago, I printed a miniature painting handle, and since then, I lost the file, so I wanted to redesign it for hobbyists like me who need flexibility. This handle features a threaded top base and interchangeable mounting caps, so…
This is a painting handle to hold small parts of figurines or miniatures. Uses 2 m4x8.1 heat inserts and 2 m4x20 screws.
Tired of dropping wooden beads while painting? Struggling to hold tiny parts without touching wet paint? This flexible TPU cone holder slides onto a standard wooden skewer and creates a soft friction grip — perfect for holding small craft…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) PAINT BRUSH RACK -…
Please upload your prints and finished painted Pingues! I would love to see them. Can be printed in colours also but ive left in white for simplicity. Use tree supports, The first one i printed and painted is slightly different to the…
This is a new version of my original clip I made to hold paint brushes to your paint pot when not in use so they don't tip and fall into the paint ( https://www.printables.com/model/1145930-paint-brush-holder-for-cutpot-house-painting )…
Obviously you'll need to print two end pieces. No supports are needed and a 15% infill seemed okay. I used PETG due to the proximity to the heat plate, but as long as you don't get it too close, I suspect PLA should be fine. As you can…
This is a DIY art. This was one of the first project I printed on my 3D-Printer. Just a really cool thing to have. :) Instructions Basically, print all the parts. You will need to print some trays more the once. Buy the things needed and…
Do you have a bunch of those Redgrass Creative painting handle caps. Need a place to put them while you are working on an army project without accidentally knocking them over. These trays will help. Sized for the original cap size and the…
A simple part painting pyramid optimized for 3D printing. Elevates workpieces during painting/drying, allowing for better access to edges and prevents it from sticking table.
This chroma was created with cromaCanvas from makelab. Powered by MakerWorld-Chroma Canvas ( https://makerworld.com/makerlab/chromaCanvas ) The picture was taken from pinterest.com Printed on my Anycubic Kobra 3 V2 PLA - 3nMax - black,…
Praktische Inlays zur schnellen und übersichtlichen Beschriftung von Artdot- und kompatiblen Diamond-Painting-Dosen. HINWEIS !!! Die Deckel-Schiffchen sind nach dem Drucken an kleinen Stellen miteinander verbunden. Diese "Nupsies" sollten…
Stand for painting press on nails or nail tips, with wings to easily pick up and adjust position without touching wet polish. OpenSCAD code written with AI, edited by me.
If you like what I do here, come visit my (German) Discord or my Facebook group. Facebook: MX_creations Discord: MX-creations (Grow-Tools/Accesoires & DP-ART) ^^ für den Bereich Diamondpainting füge ich zeitnah gesonderte Kanäle & Rechte…
Steinchentrichter (passend für Artdot- und China Runddosen)
Using a JPG file of a turkey riding a mountain bike created with the help of AI, I created the final filament painting art with the help of HueForge. Use 100% infill, 0.08 layer height, and 0.16 1st layer height. Start with black filament…
The idea is to put it against the egg and using a brush to paint over it. You can add the design of a rabbit to any egg. More designs coming in the near future.
English: Tired of messy hands while painting eggs? This simple egg painting helper keeps your egg stable and allows smooth rotation while decorating. Clean and easy to use No supports needed Two versions included: Basic version and…
A lightweight palette knife for acrylic or oil painting. Printing Infill: 20% Supports: yes
Motion Sensor Picture Frame Light clip and holder for USB Rechargeable LED Night Light The frame is made to suit a picture frame 18mm thick and to hold an LED sensor light 21mm/24mm I have changed the angle of the outside leg so the clip…
Stencils - various sizes for painting - scale to suit! I made these so I could paint onto my brake calipers
Bring a piece of Minecraft into your real world! This is a 16x16 pixel art frame inspired by Minecraft paintings , designed for 3D printing . Perfect as a wall decoration, desk display, or gift for Minecraft fans. ✔ Clean pixel design ✔…
Bouchon télescopique pour poignée de peinture RedGrass Game Plus besoin de pâte collante Fais sur SolidWorks. Nécessite 2 vis à tête fraisé M2*8 et des élastiques (Voir Photo) Les vis sont optionnelles, elles permettent d’avoir une fin de…
Hello, I have a Pyramid for you as a stand for painting, coating, spraying paint . Great thing when you have to paint or spray boards, larger pieces. Then it doesn't lie on the ground. It's better to spray, paint with a brush. There is a…
My new favorite design. Update to my previous painting handle but kept the bolt hole for backwards compatibility with version 2. This one doesn't require a bolt as the clip has the 3d printed thread to screw into the handle. As before the…
Magnetized tops for Redgrass painting handle with groves for 32, 28 and 25 mm bases. Requires 8x3mm magnets. Please be aware that the 28 mm bases are not held in grooves. There are also storage plates available to manage your minis during…
there are the files for my Painting Handles for hands Large and Small, I printed mine with some infill to give it a little strength, pop some Blu Tack (Adhesive Putty) on the top face to hold your model and then get to painting. I hope…
Hallo, Ich bin neu im Thema 3 D Druck und erstellen von 3D Dateien. Natürlich gibt es jede Menge gute Ideen hier und ich steuere nichts neues zu diesem Thema zu, allerdings kann ich so meine Skills verbessern. Jeder kann sich bei diesen…
A simple brushes holder/dryer I made for my wife some time ago. It is small enough to fit Prusa Mini's bed, does not require screws, no suports either. Just push the upper board to 4 pillars on bottom board, and that's it.
Create your own original image. The bucket serves as a reservoir for eight colors. The assembly requires a thin rope on which the bucket will swing. PROCESS: Put together a twister. Pour the paint. Places the axis of the twister above the…
This can be used for many different cases. There are three options for the head. Also need a regular 608 bearing. Optional Need rubber-bands to hold two slide halves together.
The infill percentage can be changed depending on the preferred weight, I like it around 30%. Every cork is different so some will be a more snug fit than others
Nail support for painting for one finger. It has additional plate for holding paint and some addons. My wife is using this, so I'm happy. PLA silk.
Painting and picture holder, you can put the holder or glue it to the frame and place it on your nail in the wall.
This is the small object painting tweezers. They come in 3 different basic sizes which you can edit in modeling software for your perfect size. Easy to use, bendable, and easy to store. Have fun painting! Tweezer Size Regular Opening…
Model holder with turnable top cap Paintbrush and Revell can holder Bearing 28 x 12 x 8 mm needed
Created using self-written scripts (js, python, AI) for image rendering and 3d mesh generation. It is better to use non-glossy plastic. You can also lower the temperature for a matte finish. After the first layer, you can lower the…
Original size is 200x200cm. This is my optimal size because it fits my frames perfectly. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: Devil Design PLA black Devil Design PLA dark gray…
Created using self-written scripts (js, python, AI) for image rendering and 3d mesh generation. It is better to use non-glossy plastic. You can also lower the temperature for a matte finish. After the first layer, you can lower the…
Created using self-written scripts (js, python, AI) for image rendering and 3d mesh generation. It is better to use non-glossy plastic. You can also lower the temperature for a matte finish. After the first layer, you can lower the…
Hello everyone! Before you start witch hunt, calm down. I have Full licence for use Hueforge. Legendary robot .. WALL-E “Waste Allocation Load Lifter: Earth-Class” ################################################################## Print…
Hello everyone! Before you start witch hunt, calm down. I have Full licence for use Hueforge. Skoda logo .. foto captured by me 6 years ago.. transfered to litography ##################################################################…
Pucy-Kat .. picture generated by AI ############################################################################# Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA JakobFIlament Black…
Generated with img2go Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sunlu Matte Black PLA Sunlu Matte Dark Grey PLA Elegoo Matte Grey PLA Eryone Matte Light PLA Eryone Matte White Swap…
I had the problem when I wanted to paint some parts that the edges were always on the table and so you couldn't paint the edges cleanly. The small triangles can be printed quickly and easily and then placed under the part to be painted.…
Kiste zum Transport der Diamont-Painting-Döschen incl. “Schiffchen” undt Stifte
I made a bigger and smaller version to fit even a smaler printer like a mini .
This 3D-printed adjustable hanger is designed to securely mount large paintings to the wall. It allows for easy side-to-side adjustment, ensuring your artwork hangs perfectly level. The hanger attaches to the frame with three wood screws…
A pair of earrings I made last christmas for my mom. Model is simple and easy to print. On the ones pictured I tried to imitate my moms own art into the earrings, she does abstract color mishmashes. Painted with acrylics. Print Settings…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Aurapol Black PLA Aurapol Red PLA Aurapol Yellow PLA Aurapol Gray PLA Aurapol Black Gray PLA Aurapol White Swap Instructions: Start with…
A painting handle roughly shaped after a Citadel paint pot. Simply add some blue-tac and stick your model on there and away you go. Not going to win any awards for looks but the simple design is easy to manipulate your mini in your hand…
A painting handle designed to hold multiple models at once. Useful for airbrush priming and painting multiple simple models (e.g terrain) at once that doesn't need finder control of a dedicated handle. Slap some blue-tac on there and…
This is a simple painting handle to use with my magnet miniature base and HP dial system . You can change the infill percentage to suit your desired weight. 5x1.5 magnet Magnet orientation MUST match the magnet in the miniature bases for…
AI generated hueforge filament painting of our beloved and cute Flash the white Schnauzer dog. Print settings: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at…
AI generated hueforge filament painting of our beloved and cute Flash the white Schnauzer dog. Print settings: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at…
AI generated hueforge filament painting of a D&D wizard inspired by the Elden Ring video game. Print settings: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at…
The Plans for the plane can be found here: or https://www.thingiverse.com/thing:6707991 This is just a simple model that i used to add the name and registration to the wings.
I used blue PLA at 0.3mm layers and 15% support cubic infill. Designed for a surgical glove size 9 hand, or a medium nitrile glove-sized hand.
Triangular stand to facilitate the painting of wooden or iron objects. Individual stands can be connected to each other to create a larger and stronger structure. In the stand, it is also possible to paint logs up to a diameter of 20 mm,…
After spending time painting large miniatures, and getting tired of not being able to leave the mini on the paint handle just to let it dry for a bit, or to put away, I had to come up with a solution. It was a simple solution, hence why…
Rotating 3D Painting Base for Flawless Finishes Elevate your painting projects with this innovative rotating base designed specifically for models and 3D-printed parts! 🛠 Design Features The design consists of three key components: Lower…
Hook for hanging Canvas Paintings with Command Strips. hook is sized for “Command Foam Holds strong Picture Hanging Strip Black, Medium , 5.4kg”, I used this hook for these Command Strips I got from Amazon:…
Plastic Stencil for Wall DIY, Scrapbooking, Embossing and Card Making - Art Supplies Stencil 4 different horse models . It is easy to use a pen and paper, or a paint roller, to apply a picture to a T-shirt, wall or anything else. The size…
UPDATE 2024-10-02: designed a new version from scratch with four grippers for stronger hold: https://www.printables.com/model/1026516-gridfinity-miniature-holder-for-painting-v5 ------------------------------------------------- Improved…
I love the design of the handle, but felt like it was a missed opportunity to have a lid for the bottom so you could actually store the adapters inside, rather than having them float around. The ideal solution would probably to thread the…
holder for painting miniatures. Compatible with gridfinity. Supports multiple sizes, grips from four sides for stronger hold. For extra holding strenght, a rubberband can be added. Prints without supports. A version with supports is also…
Behold, another painting handle. There are many like it but this one is mine. I made the model parametric so that other people can make it theirs! I didn't make everything parametric, but most of it is. Should hold a 40mm base with no…
Hole board for wooden sticks in assisting paint work. Size 18x18cm big or 10x10cm small, the holes are 2,6mm with 12mm spacing between them. The holes have a slight taper, so sticks will clamp well. Fitment depends on the size of sticks…
