Painting water pot with brush holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A place to clean brushes and to store them.
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 482
- Wydruki
- 2
- Wyświetlenia
- 2005
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This water pot has all the ridges and grooves for massaging your bristles you could hope for but adds a handy place to park your brushes when you aren't using them.
I used PETG as it is water resistant and sliced with an extra perimeter layer as recommended for vessels. It still leaked so a couple of coats of polyurethane varnish fixed it right up. In which case you might choose to use PLA instead and varnish it straight away.
Due to problems with the print coming unstuck from the print bed I added some scaffold struts in the base. These just sure everything up.