Diamond Painting tray with lockable spout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple tray for neatly aligning the Diamand parts and filling them again after use.
- Ocena
- 5 / 5
- Polubienia
- 136
- Pobrania
- 704
- Wydruki
- 6
- Wyświetlenia
- 2829
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Heyho
Update 07.01.2024:
Added a version with lower walls so it is easier to access the plates.
My girlfriend asked me to print such a tray for her colleague.
So here is my version of such a thing. It has a spout so that the small particles can be easily filled again.
Since I noticed during a test that many parts would like to run off through the spout, I also constructed a simple cap for it.
For a particularly clean print, you can use tree supports in the front area. But this is optional.
I printed with a ,6 mm Nozzle 25% infill 2 Perimeter PLA.
Have fun!