miniVICE X-Series - Modular miniature holder, painting and hobby system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a new version of my miniVICE Miniature holder painting and hobby system. old one:…
- Ocena
- 4,375 / 5
- Polubienia
- 339
- Pobrania
- 1019
- Wydruki
- 9
- Wyświetlenia
- 6793
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Newer Version Available
Made many improvements. Leaving this version up as its still useful and works well. Newer version is more secure and has many improvements but this version is simpler and allows for better interchangeability when working on multiple miniatures. Something I had to move away from to make it stronger and secure.
Summary
This is a new version of my miniVICE Miniature holder painting and hobby system.
old one: https://www.printables.com/model/214734-minivice-y-series-modular-miniature-holder-paintin
This one has 4 jaws allowing support for both round and square bases in the one holder. Additionally, you no longer require the metal pins of the previous version. It is, however, only slightly harder to print, I had to use rafts to print the collets/jaws. It uses a 70mm rubber band. You could experiment with a hair elastic maybe.
More details to come with more detailed instructions.
For now, it assembles much the same way as the Y-Series version. View its detailed instructions here: https://www.printables.com/model/214734-minivice-y-series-modular-miniature-holder-paintin
NOTE: in this version, the collets are numbered because the way in which they are installed matters. install them 1 to 4 sequentially anticlockwise or the chuck will not work
There are also several versions of the collets
small collet:
- 25mm - 40mm
- 65mm rubberband
- chuck jaws top regular
large collet:
- 45mm - 60mm
- 90mm rubberband
- chuck jaws top large
combo collet:
- 25mm - 45mm and 45mm - 60mm (hollow bases only)
- 65mm rubberband
- chuck jaws top regular
large collet v2:
- 45mm - 60mm
- 65mm rubberband
- chuck jaws top regular
combo collet v2:
- 25mm - 40mm and 45mm - 60mm
- 65mm rubberband
- chuck jaws top regular
Updates
4th July 2020:
- added cork holder, use size 9 corks (most used in commercial wine bottles), screw-down into place and secure with a pin underneath.
Category: Hobby