Liczymy pasujące modele…
Hi Everyone: I originally posted this design for a fast-printing modular drawer system on Thingiverse, but quite a few people suggested that I also post it Printables (I can see why. Printables runs so much smoother and the support is…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
I created the stackable version of my Organizer/Basket for Drawer at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High Profile 204.0 124.5 117.5 Standard Profile 60.0 Low Profile…
Wydruk około 3,93 €–4,81 € nettoWstępna wycena jednego wariantu
360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
Optional upgrade for your RepRack or RepBox storage systems. Add a flange rollers to your slip rod setup for enhanced rolling as needed. Print directly from your RepRack or use in a standalone configuration. Snap fits cleanly over slip…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
All printable parts for your Advanced Filtration System Add-on. You will also need Basic Board + PSU Add-on, which is shipped automatically with Advanced Filtration System. All of the add-ons and community models can be found here . Print…
Wydruk około 7,02 €–8,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE Featured on the @Prusa Blog: Prusament PLA ColorMix feature https://blog.prusa3d.com/prusament-pla-colormix-print-45-color-shades-using-just-five-filament-spools-and-more_137835/ Added .gcode and .3mf files for ColorMix. Thanks,…
Wydruk około 6,16 €–7,53 € nettoWstępna wycena jednego wariantu
I created the Hexagon Pattern Version of my Stackable Baskets Organizer System with Lids (Circle Edition) at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High 204.0 124.5 117.5…
Wydruk około 3,00 €–3,67 € nettoWstępna wycena jednego wariantu
180° Tablet Holder Hinge for the Multifunction Arm Mounting System (Small Arm System) What you need Printed parts Multifunction Arm mounting system (Small Arm System) Multifunction Arm mounting system Spinning Adapter Big Clamp For Small…
Wydruk około 3,00 €–3,66 € nettoWstępna wycena jednego wariantu
These models are remixed from Frank Dreschner's “Designer Lithophane Moon Lamp” [1], and raTmoles' lithophane solar system [2]. I extracted the bajonet adapter from Dreschner's original model and fitted it to the respective 3D model.…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Salut, Voici un système de boîte de rangement à assembler et à largeur variable. Pour créer la boîte : Imprimer les 2 cotés grâce aux fichiers “coteD” et “coteG” Imprimer la traverse à l'aide du fichier “traverse” → Pour régler la…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
Hello there! Unfortunately, the centralization of Bitcoin mining continues to increase. But Bitcoin is for everyone! Especially for small people like you and me, Bitcoin offers the opportunity to break out of the system and gain financial…
Wydruk około 6,36 €–7,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure Features Easy to print and to assemble All the printed parts…
Wydruk około 2,90 €–3,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello there! Unfortunately, the centralization of Bitcoin mining continues to increase. But Bitcoin is for everyone! Especially for small people like you and me, Bitcoin offers the opportunity to break out of the system and gain financial…
Wydruk około 8,63 €–10,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introducing a versatile and practical stackable storage box system, perfect for organizing your workspace, kitchen, or home. This 3D printable model features two types of boxes: one with a solid bottom for durability and another with a…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
With this ReFill System you can store your filaments that are without the stands on the side!
Wydruk około 7,40 €–9,04 € nettoWstępna wycena jednego wariantu
Installation instructions is identical as provided by Prusa at : https://help.prusa3d.com/guide/7-advanced-filtration-system-add-on_361946#362491 If there are any hurdles or request, please feel free to reach out in comment or direct…
Wydruk około 6,56 €–8,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
NOTE: You find the new and improved version 2 here: https://www.printables.com/de/model/326872-air-traffic-controller-board-v2 Warning: The 60 degrees base seems to be misaligned, I'll remove this message when I've fixed this! Update…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
I like to grow Chillies and and i lack outside space to grow more so i stumbled upon a video on youtube that inspired me to try hydroponics. after i watched that video i modeled something similar to what is shown in fusion 360 and tried…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
You might want to look at my recent Adjustable Exhaust v3 Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The tightener is designed to help press the Prusament spool sides to the cardboard centerpiece of the Refill spool. The tightener is very easy to fold. The parts fit together precisely, see figure. Then use the tightener to press all the…
Wydruk około 16,79 €–20,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Final release after more than 6 months of developing and testing! After a several month long beta process and countless improvements (especially of the auto-rewind mechanism) the complete EMMS works 100% reliable for month now. It took…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hey everyone, i designed a wallmount for my Einhell powertools and thought i'd share with you. You will need something with a 20mm diameter and appropriate length to fit everything you want on it. I've used a aluminium pipe from the…
Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu
I needed a replacement cover for the TTL flash socket on my Olympus OM-4 Ti. You can find some on eBay for 10€ that look nice and are 3D printed. But I couldn't find their 3D model online, so I made my own. It's not as pretty, but it…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
When having both the optional “Hinged-Lid” and “Advanced Filtration System” add-on installed, you'll find you have to share 1 connection with both of them. I've adjusted the “Hinged Lid Hinge-Bracket-R” to accommodate “Advanced Filtration…
Wydruk około 8,75 €–10,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Build your own filtration kit from cheaper parts. I modified the Advanced Filtration System Bracket to fit the following fan and filters I sourced from Amazon for a nice savings. Fits this filter $9/ea:…
Wydruk około 5,58 €–6,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Who would have thought you could use a pegboard as a filament spool? Perfect Prusament Pegboard (PPP) is a new system for organizing your printer tools neatly and discreetly near your printer. The carefully designed pins fit into any new…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
replacement hooks for the Element System printing with supports it requires a bit of work with a sandpaper
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
System designed to care for plants in their growth, also to mount vines, you can support even more things, not just plants. How Start: You can start printing the starter kit to build a basic growing plant shield like you see in the next…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created this adapter for mounting my tp-link Omada Controller OC200 in a server rack. The controller simply snaps into the printed frame without any additional screws or other fixture. For mounting small parts inside a 19'' rack I use…
Wydruk około 3,16 €–3,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Advanced Filtration System fan started making clicking noises after a few prints. I figured out this was due to too much pressure from the filter component on the fan wall. The kit comes with a foam insert and the feet of the insert…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
It is always slow to drain the last bit of thick liquid stuff from its container. This presents a small challenge when trying to save it. I found my wife using funnels and clamps and trying to balance them for a transfer to the new…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Prusa Advanced Filtration System Bracket remixed to fit Fette Filter 100x100x30mm ( 4" x 4" x 1.2") Fette Filter - Air Purifier True HEPA Replacement Filter Compatible with OSIMO A2 Air Purifier with High-Efficiency Activated Carbon…
Wydruk około 5,66 €–6,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print in ABS or ASA or PC blend carbon power on the heater only with exhaust closed (recycling air)
Wydruk około 7,57 €–9,25 € nettoWstępna wycena jednego wariantu
I wanted to adapt the Prusa Advanced Filtration System, originally designed for the Prusa Enclosure, to my IKEA Lack enclosure. Since it already came with a filter bracket, I didn't want to waste filament modifying it and printing a new…
Wydruk około 2,24 €–2,74 € nettoWstępna wycena jednego wariantu
Prusa Advanced Filtration System Conversion Kit for CORE One This conversion kit allows the Prusa Advanced Filtration System originally designed for the Enclosure to be used with the Prusa CORE One. It provides a practical way to reuse…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These mounts will allow you to attach your wall control panels to the end of a 18 inch modular wire shelving system, they use Shelf Lock Clips to hold them in place locking them to the bar. I have tested them on Regency, Trinity and…
Wydruk około 17,76 €–21,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I'm in the process of adding LED canopy lights to my upper deck. Since this is my upper deck, I needed to design holders for electrical conduit pipe that I will string the lights from. I created and printed several models to accomplish…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction This project provides customizable insert blanks specifically designed for the LR2052 Storage Box System . These inserts are purposefully kept simple, incorporating essential design features to ensure a seamless fit across a…
Wydruk około 8,23 €–10,06 € nettoWstępna wycena jednego wariantu
I wanted a simple air filtration system for my enclosure to help reduce odors and air born particulates from printing higher temp materials. This model is a mountable cage for a 120x32mm radial blower fan and a 5"x5"x1" square filter. It…
Wydruk około 9,56 €–11,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mr.Fox loves tinkering with robots and teaching children how to build and program them. To prevent the robots from speeding over the edge of the table and crashing to the floor, he designed a modular system of connectors and boards to…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Introduction This model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm , ⌀205mm (this upload), ⌀150mm ,…
This is openGrid, a general use wall and desk mounting framework/ecosystem. openGrid uses an opinionated design, focusing on ease of use and a clear structure for all the base parts. Still it is mainly meant to be extended by everybody…
Easy To Print - Works With Screws 3 sizes
Printable model of the Prusament spool for Prusament Refill system. If you cannot use your old Prusament spool, it is possible to print this reusable spool and put the refill on it. The model is made to fit the Prusament Refill spool . -…
This is the UMBs, a modular storage system. You can print the assemble boxes and the accessories but if you want you can customize-it the way you want it to. For the prints, i recommend 30% infill and 3 walls and 4 top/bottom. Support is…
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips/files Horn assembly - Horn goes in from the bottom. Chest assembly, middle front plate goes in first. Super glue is your friend. Original pieces…
I don't have enough Hot Wheels track to make a cool stunt course, and the track packs are expensive, so I made my own track system. It is slightly wider than standard Hot Wheels track. The barriers are about the same height and more…
Update: for a new version of this model, including other sizes, gridfinity top and bottom and solid walls, please visit https://makerworld.com/en/models/1234733 Introduction A remix of the gridfinity 5x3x5 (3 drawers) case ( Hugo ' s…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! Hello Everyone This is a collection of three of my projects in one place - “ A1 Series - Toolhead Cable Guide”, “A1…
After posting my first remix, the XBox Controller - Starfield Edition , I realized that others might want different games shown instead of the one I made. So I redesigned the model by placing a couple of voids in the middle of the stands,…
Title: 3D Root Watering Spike 15cm - 360° Irrigation System Description: An innovative and effective solution for indoor and outdoor plant care! This 15cm watering spike is designed to deliver water directly to the root zone, preventing…
Cable Management EcoSystem Convert your environment into Factorio! Simple Clip to hold cables +6 diffrent styles of Trays! And few more in files ^^ Simple mounting way! Normal Head Cap Screw M4 Heat Insert (4-5mm) Countersunk Head Screw…
Replacement power outlet (EU type) for Gira System 55. All my original frames, plates and power outlets (white) are breaking after 15 years, so i decided to CAD and print them, adding some design improvements compared to the original.…
Recommended Settings: 3 Walls, 20mm/s slow first layer, NO supports. This is an EXPERIMENTAL FABRIC and having pieces come off while printing is normal! You may have to restart or try a smaller model. Brims are not advised. Feel free to…
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips/files Edit: Added color separated plates for remake color scheme. Paint apps: head - yellow, white, black, green for details. chest - yellow, black…
3D printed Mech-arm railway system. Compatible with other Mech Arm models. Allows you to move and shift the holders of phones, tablets and other compatible devices along the edge of the table. Reinforced system of fastening to the table.…
this is a low profile LED COB strip mod for the Bambulab X1C and X1 printers. This prints in four pieces and is securely held together with 4ea M3x16 screws. I recommend this kit.…
Introduction Inspired by Alex Chappel's “Stackable Assortment Box Collection”, which you can find at alch.shop btw. I didn't like the bump at the top of the boxes, as I wanted to have just straight walls. Also I have absolutely no need…
It Is simply holder for accu drill 20V, use 3x screws
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips/files Edit: Added articulated Jaw. Assemble the jaw before putting in the frame piece for the head. adding onto EVA-00. Head extracted from…
Fits the AZDelivery ESP32 Cam Module Board. There's a good chance other branded boards also fit. Snap fit enclosure Enclosure has holes for the ESP32 cam board pins to hold it in place Use some glue or double sided tape to attach the…
Introduction: ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum. Find out more about…
What this project accomplishes Easy/Fast filament loading/unloading from a single position above your printer. The least amount of hardware needed. The least amount of filament needed. (about 130g per box) The least amount of holes being…
Combines the benefits of free-hand sharpening and a fixed-angle system. It takes less space than a full fixed-angle system, allows you to use any stone, and is quicker to use. Just put a knife on a magnet, set the angle with a screw, and…
Elegant solution for storing Pyrex glass food container lids. Simply print as many of each size that you need and glue or melt them together in a stack. An alignment ridge is provided in the model to making stacking them perfectly easy…
Wall Mount - Side fastening system with security clip - Sistema di aggancio laterale per pannelli Recommended Filaments: PETG - PLA+ - ASA - ABS Hardware needed: Screws as per assembly requirements All our designs are free to download and…
In addition to the carabiner, you might need a buckle that attaches to a strap or MOLLE webbing on your backpack and, optionally, a locking pin to ensure the element won't slip away accidentally. Both components can be obtained from the…
Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…
Description Experimental vertical hydroponics system I have designed for growing Herbs indoors. Things you will need for the assembly: M5x40 button head cap screws (x18) M5 nuts (x18) M8 threaded bar (730mm minimum) M8 nuts (x8) M8…
This is the all new Vortex System to mount the Biqu H2 V2 extruder on the Sovol SV01 PRO, OG SV01 & SV03! Equipped with twin spiralling air ducts for powerful effective airflow directly to the area below the nozzle! . EDIT: Now with V2…
Overview I think we can all agree that the plus 4 needed a filter redesign and a HEPA filter added. This variation features an aesthetically pleasing design and great filtration. It works extremely well in conjunction with the 8038 Fan…
Here is a filtration system for the QIDI Plus 4 which install on the port of the Chamber Circulation Fan where the original carbon system is located. This filtration system uses a HEPA filter and acid free activated carbon pellet to help…
A Desiccant Loop Silica Gel Box for HDRY System Check the HDRY System here: https://www.cc3dprojects.com/cc3d-hdry-system This is a ventilated silica gel box designed to improve moisture absorption inside your HDRY setup. Learn more: The…
Edit: Much better version of the hexgrid available here, by Derare! Get some super cool cobblestone road tiles by Skaldamar here! He also remixed some neat settlement tiles here! Hexgrid (functional but non-final) download:…
Description System for the magnetic connection of machines and fans with 150mm / 6 inch hoses. Can be used e.g. for laser cutters, soldering stations, welding work, vacuum cleaners, shop vacs or planers. All connections and adapters are…
This is a smaller and cheaper replacement for the original filling system, see https://storz-bickel.com/en-us/filling-set-for-40-dosing-capsules I recomment to iron the upside of the hole-plate. 2023-08-25 Update: Fixed “Druckplatte.stl”…
This is a wall-mounted trash can to put your leftover filament in or to collect other waste. The easy-to-use hanging system allows it to be placed on horizontal and vertical cement joint lines. This trash can has a capacity of 10 cm deep…
ULTIMATE COUNTER SYSTEM (UCS) Hello! This version only comes with number tiles. If you’d like to support my work, you can purchase all of the symbol tiles here: Ultimate Counter System on Cults3D –…
Why? Thousands of spray can holders available.. but none made efficient use of the space in depth. So I came up with the idea of mounting the spray cans on the wall at an angle so that the next row overlaps with the previous one. This…
Das passende Filament findet Ihr unter https://www.3d-printiverse-shop.com/
🆕 UPDATE 12 March 2025 Check out my new spool-solution - the BUFFER UNIT ! This is a way different setup from the COBRA-edition. It features and integrated, gravity-powered filament rewind mechanism inside the spool holder itself. The…
Introducing the Hexagonal Spool for Prusament Refill. It's not just your regular spool, it's six times cooler. And with its hexagonal shape, you'll never have to worry about your spool rolling away from you like a disobedient pet. It's…
MMU BOX is a mechanically engineered, mostly 3D-printable rewind buffer system designed specifically for the Prusa MMU3. It replaces the stock filament buffer with a compact, modular system featuring independent active rewind per spool.…
This is my "Leading Edge" Sharpening System. NOTE - The LATEST (Major upgraded) version of my system will soon be available as a ready-to-assemble kit from https://www.gritomatic.com . I will not be updating this version on Thingiverse…
Gotta cover em troops! The trench system is awesome and cheap to produce. Create the best of tables! Also, if you are able, visit the Capsule chibi project at https://www.patreon.com/capsule , join and help fill the world with 3d printed…
Made for “The Ultimate Prusa Mini Enclosure v2.0” but adaptable to any enclosure Features a 120mm fan! --– Whats new! --- The 2.0 Update is mainly about safety. This new filtration system features: 2/3mm gasket, in order to prevent air…
Ultimate parametric IKEA skadis hook system in square and round Make your own custom boxes for your pegboard. Just meassure outer dimensions of your item you want to store, change the parameter in f3d file and print it. Also print a bunch…
It is originally designed for use in furniture, but there are many more applications, where this system can be used. You will need 604 bearings and M4 nuts, bolts and washers. The core of the rail is made out of Wood, but you can print it…
*Component Added - Clip with 11.5mm LED strip gap This is a newly created model for my enclosure to organize and clean up my enclosure wiring and led lights. The conduit can be printed in white to act as a diffuser over top of led strips.…
A jam proof pulley for antenna or other projects. The hing mount and the pulley mount have a matching diamond interlock that allows the pulley to be mounted in one of two orientations, depending on your needs. There are also mast top…
This is a remix; however, I do not know where I got the original model. Please advise and I will give credit as credit is due. This is a complete garage storage system with hooks of varying widths to store a very wide range of tools. The…
I am giving back to the reefing hobby with a project I’ve been working on for the past couple of years—a fully 3D-printed modular frag scape system. My company, 3DReefing , is dedicated to innovative reef-safe designs. If you appreciate…
For those unfamiliar, a differential allows two output shafts to be spun at different speeds from a single input shaft. You will find these in most cars on the road. For more info see http://auto.howstuffworks.com/differential1.htm…
Adapters to build a multifunction arm of any length from 20x10x2 mm aluminum rectangular tubes or included printed tubes. For small Multifuntion Arm Mounting System . Also included is a tube with 90 degree rotated connectors which…
Masterful Dungeons Stair Clipss are designed as part of a fully modular dungeon system built for tabletop RPGs like D&D and other TTRPGs. Instead of being a fixed stair model, this system uses specialized clips that elevate standard wall…
💧 Modular Hydroponic System from 50 mm PVC Pipe – for Growboxes A flexible and easy-to-assemble hydroponic system based on 50 mm PVC pipe. Allows you to build any length installation perfectly fitting your grow tent (growbox). The system…
I am going on a trip soon and wanted a simple grip that I could use with my DJI Osmo Pocket 3, and I couldn't find one. So, I went ahead and made one using parts from other models I found along the way (linked at the bottom). This grip…
Я сделал этот апгрейд системы охлаждения материнской платы по одной причине - уменьшить шум в режиме простоя принтера. Меня не устраивали уже готовые решения, поскольку они рассчитаны на большие 120мм вентиляторы. Габариты очень большие.…
![[v2 abailable!] ATC Flight Progress Strip System](https://media.printables.com/media/prints/57584/images/605984_6bf0de79-4719-4c62-8bae-7d132891ef8d/img_20210221_144815.jpg)
![[OLD] COBRA System for Original Prusa Enclosure](https://media.printables.com/media/prints/338523/images/4530559_01a22827-cafc-4c56-ab5c-ea3e4f38533c/58.jpg)
