Adapter plate for Prusa Advanced Filtration System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter plate to adapt Prusa Advanced Filtration System (for Original Prusa Enclosure) to IKEA Lack enclosure.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 388
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to adapt the Prusa Advanced Filtration System, originally designed for the Prusa Enclosure, to my IKEA Lack enclosure. Since it already came with a filter bracket, I didn't want to waste filament modifying it and printing a new one. Instead, I quickly designed an adapter plate to attach it to the 'ceiling' of my Lack enclosure using Ø5 countersunk wood screws. I printed the adapter plate out of PLA because it was the only filament I had available at the moment.
To assemble, print the adapter plate, place the High-Pressure Blower into the original bracket, and attach the adapter plate to the original bracket using wood screws (I'm not sure which ones I used; I picked them from the drawer of miscellaneous hardware I have). Then, position the system in the center back ceiling area of the Lack enclosure, mark the holes referenced to the 'exhaust side' of the original bracket, drill them with the appropriate drill size (I believe I used Ø6), and secure everything in place using Ø5x20 countersunk wood screws.
I hope someone finds this useful.