Advanced Filtration System Adjustable Exhaust (v1 & v2) for the Original Prusa Enclosure

You might want to look at my recent Adjustable Exhaust v3

Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure

Features

• Easy to print and to assemble
• Can be easily oriented to redirect airflow into or out of the enclosure
  • Keeps the enclosure cooler while printing PLA (around 24.9°) or PETG (26.9°)
  • Keeps the enclosure warm while printing ABS or ASA
• 2 Choices of Exhaust Duct
  • 90Deg : Fits the Fan Rotated 90deg - Prusa Filtration System Housing Remix
    • Requires printing a Remix of the Advanced Filtration System Add-on
    • But provides an almost direct line ducting and better airflow  
  • Original : Fits the Original Advanced Filtration System Add-on Printable Parts
    • Reuses the existing Advanced Filtration System Add-on
    • But the ducting is curve and allows less air circulation 

What you need

• Super Glue 
• Spare nylon rivets (4x)
• M3x6 Socket Head Cap Screws (3x)
• Printed parts
  • Exhaust
  • Duct (90Deg) v2
    • Print the Fan Rotated 90deg - Prusa Filtration System Housing Remix
    • v2_duct_seg(1,2,3,4)
  • Duct (Original) v1
    • Reuses the existing Advanced Filtration System Add-on printed part
    • v1_duct_seg(1,2,3,4,5)

Be advised

• This is a tight fit, your printer and filament settings must be well calibrated
• Super Glue is needed to hold the duct segments together  
• Please, let me know if your encounter problems
  • I will try to help you solve them

Print settings

• Common settings
  • Filament : Generic PETG 
  • Printer : Original Prusa MK4 Input Shaper 0.4 nozzle
  • Print settings : Default 0.20mm STRUCTURAL
  • Perimeter generator : Arachne
  • Perimeters : 2
  • Infill pattern : Gyroid
  • Infill density : 15% 
• exhaust_(cover & duct)
  • Support : None
  • Brim : None
• exhaust_selector
  • Supports : Support on build plate only
  • Support style : Organic
  • XY separation : 120%
  • Brim : None
• duct_seal
  • Supports : Support on build plate only
  • Support style : Snug
  • XY separation : 120%
  • Brim : None
• v(1,2)_duct_seg(1,2,3,4~5)
  • Supports : None
  • Brim : Yes

Post processing

• duct_seal
  • Use Super Glue to attach the duct_seal on the AFS Add-on fan exhaust
    • OR you can use three M3x6 socket head screws
      • Take extra care when drilling the holes in the AFS
      • Make sure you don't overtighten the screws
• v(1,2)_duct_seg(1, 2, 3, 4~5)
  • Use Super Glue to join the duct segments together

Assembly (no glue is needed for assembly from this point on)

• Use 4 nylon rivets to attach the exhaust_cover to the back acrylic panel
  • Use the spare nylon rivets provided with the Original Prusa Enclosure
• Insert (slide) the duct segments into the duct_seal
• Insert (slide) the exhaust_duct into the exhaust_cover
• Connect the exhaust_duct to duct segments 

Change Log

• 2024-05-13 v2 : Added a v2_duct_seal
  • Removed the top part or the rail for easy duct installation and removal
• 2024-05-11 v2 : Added the Duct for the Duct (90Deg) 
  • Thanks to Vespercorp for providing me with the 90Deg Remix