Liczymy pasujące modele…
These are parts to make a ventilation system, you just need an 80mm pc fan (I use a phone charger to run it), 80mm diameter ventilation pipe and some hex-nuts and bolts for it. I use it for my elegoo saturn but also for my fdm printing…
In the attempt for a more realistic look I have made these exhaust stacks to give the appearance of them coming up through the truck back
Pretty basic model. I made the base thick so it would fit nicely in my window and have a little weight so the duct wouldn't keep pulling it out.
The Mastercool pumps have an exhaust vent that doesn't allow any attachments. When I was drawing a vacuum on large chambers the pump was filling my garage with mist. I tried sponge filters, duct taping filters on, and nothing was working…
This 3D-printed adapter sleeve is custom-designed for the DeWalt planer exhaust port, providing a perfect fit for seamless integration with the Dust Right dust collection system. Its precise dimensions ensure a secure and airtight…
I created this fin to redirect the hot air coming out of the back of the laptop and prevent it from being recirculated back into the laptop. The cable holder is optional. It might work with other laptops as well.
Need a 4-inch fume extractor exhaust connection for your Voron 2.4 or Trident? This magnetic 4-Inch Voron fume exhaust connector remixes the ring from JCShumpert 's Magnetic Fume Exhaust (4 inch duct) for EnXLosure Backpanel for use in…
Falcon2 Pro Collection I had smoke creeping out the crack between the exhaust hose adapter and the side of the enclosure as well as the hose connection where the wire wraps. I replaced the fan grill with this foam gasket cut from 2mm…
Voron exhaust fan block off plate, I used this when I went to CPAP- Pause at layer 15 for color change -x4 M3x8 screws
This cover was designed to clamp onto the umbilical cable without needing to disassemble the cable. Based on Fiction's Exhaust Cover , but re-implemented in OpenSCAD. Scad files included for customization. Requires adrianschlatter's…
This mod allows you to replace the original carbon filter, but let's you have up to 5 umbilical cables through the back of your printer. The design allows you to have a clean wiring inside the chamber and let's you manage all the CAN…
A replacement nozzle cooling system with a duct to fit an 80mm fan. Haven't tried it yet as I'm looking for a way to convert 24v to 12v for the fan. Check out my other model for the fan Duct:…
Googly eyes not included. This is a redesign of my previous fume extractor, made to be a bit sleeker on the outside and to have the exhaust come out of the side instead of the front for easier use. I also added a foot for stability, and…
I started using ABS and PETG a lot in my prints and started noticing funky smell during and post print without realising that these filaments give off some nasty fumes. Previously I conceptualised and came up with Tingkat - Creality K1C…
I have an inline bathroom exhaust fan, but needed to connect it to three vents without running back to the store. Glue and fit the panels. A blanking plate model is included if you don't need all four.
I am working on designing a new exhaust manifold for my Volvo 940 turbo, and I remembered seeing a tube snap-on plastic fabrication system from a company. Searched for a 3D printed version and found don-f design over at thingiverse;…
ZC31S Suzuki Swift Sport Bumper Hole Filler This custom bumper hole filler is designed for the ZC31S Suzuki Swift Sport, specifically for vehicles running a single-exit exhaust in place of the original dual-exit setup. The model is based…
Remix of Wolf_Prints remix of the model from Uncle Jessy's HEPA filter vent for the Elegoo Centauri Carbon. I'm intending to use this with an original design adapter to a flexible dust collector hose. Wall thickness of the cylindrical…
100mm exhaust vent being used as part of a 3d exhaust system. I needed a version that fit into a ½ inch (12.7mm) board. I then decided I wanted a tighter hexagon grille. STL file provided in case you want to tweak this further. On the…
Adapter to connect a 41mm diameter (OD) hose to the SV08 enclosure exhaust port. This is the diameter of the Mars Mate air purifier hose, so that the printer can be connected directly into the Mars Mate. If the hose connection is slightly…
Description This mount allows the hot air exhaust of an air-con to be vented outside through an wall. This particular design is for an Hantech Local Air Conditioning unit. This design also includes a grating to prevent any animals from…
[ENG] Replacement air channel for RPK CYMA airsoft replica. Recommended to print on the front of the pad with a layer height of max 0.2mm with a larger number of perimeters. For stability when printing it is better to print with brim. It…
Try the newer version! I highly recommend using V2 of this model instead. I'm keeping V1 as a separate listing because of the weird duct angles that aren't supported in V2. I never used those weird angles, however, so not sure how well…
This is a remix/repair of the 90-degree vent hose model from RobertCowen for the Xtool P2 and P2s. The models that he has posted for this specific part have artifacts present in them that stop both the 3mf and STEP files from printing…
After creating a similar exhaust adapter for my Core One, I decided to design one for our office's Qidi Q2. This adapter takes the Qidi Q2 exhaust to a 120mm PC case fan, with another adapter to 4" exhaust hose that will be run to a roof…
There are so many design decisions I really like about the 🥰 CORE One. But when it comes to the exhaust fan grid, it's just on the edge to call it " functional" 😟. So I felt I needed to design a drop-in replacement to fix the things I did…
nothing complicated. Basically, just a fusion of 2 models on here. you'll need the following files : Download the file here. The filter holder (HEPA Filter.stl) from https://www.printables.com/model/381011-voron-24-hepa-filter The sensor…
Updated: Added shorter poop bin for X1C with out the riser. Trim the poop slide to give it more range of motion. Remove poop slide adjustable support. Trim the right main unit to add more room for poop slide. THIS ONLY WORKS IF YOUR AMS…
I got kicked out of my shared garage because I was in and out changing the filament on my 3d printer (Shame on them) So...... I ordered an enclosure and now the printer is in my kitchen.... Because it is winter and all, I did not want the…
Hangar 9 20cc Bronco Turbine Exhaust models! there is a left and right the left is marked
A zero support wye/tee fitting for 4" duct systems. designed to print without supports! You'll need a brim, though, because there's very little contact area on the build plate. it's 4" OD, so the duct slips over it. I printed in both ASA…
Combined the two Part A BC and Part B and removed Screwhole.
General Description: This is the Rat Rig VCore 3.1 Upper Rear Panel 3D Printed with a 2 in. air filter port, chamber temp sensor mount, and a filtered chamber exhaust. It uses 2 - 4i n.x4 in. Nispira 3-in-1 True HEPA Carbon Filter…
I couldn't find a low profile exhaust attachment for the CoreOne as I wanted to have it turn off to the side as soon as possible. So I made my own. The outer diameter of the circle is actually 102mm as that was a better match for the tube…
This is a magnetic mount for attaching a vent hose to the Prusa CORE One Advanced Filtration System. It fits snugly and is held securely with 10mm x 3mm magnets but it is easily detachable. Models are currently available for the following…
When the extruder moves to the back-left corner of the build plate, the cable bundle can snag behind the rear exhaust fan. This shroud extends all the way to the back panel, blocking that gap and preventing the cable bundle from catching…
Modified Version of this model made to fit a 100mm large Tophat: Includes a lid which is friction fit onto the back when not using the exhaust fans so the temperature in the chamber can go up. For Assembly Instructions visit the original…
Features a simple installation and plug & play design — only the original stock screw is required. For improved durability and long service life, the part is recommended to be printed from a rigid material.
Introduction This model is meant as a replacement or upgrade of the Q2's exhaust/air filtration system. It allows for the use of cheap replaceable HEPA filters and activated carbon pellets, and fits 100mm exhaust tubes, and a 100mm inline…
After receiving my BigTreeTech VVD/ViViD and printing the couple stls on their github, it became apparent that the stock filter access cover for their modified exhaust filter housing would not fit. This is a modified version of the stock…
This model is a surround that is installed so that the umbilical and PTFE tube can no longer be caught in the exhaust fans. I found this to be an issue especially with models that take up a large portion of the print bed, especially those…
This is an adapter so you can hook up the FumeClear FC-2001S to the exhaust of the Elegoo Centauri Carbon. The fume extractor can be found HERE If you do not like this option i have created a replacement top for the FC-2001S so it can…
I wanted this because despite the filter on the printer I was still getting heavy ABS fumes. This just pushes onto the printer outlet, and the ducting is taped on like any aircon application. It's a simple design, I didn't get fancy about…
I don't use an exhaust filter on my Voron Trident, so created this modified exhaust filter cover for use with the BigTreeTech VVD / ViViD and its filament buffer. I've added cable pass through on the side to connect the filament buffer to…
This model is for those that purchased an xtool metalfab bundle package that includes the AP2 Max and did not receive the 8" exhaust hose adapter. If you want one, you need to contact support and it ships from China. I printed this and…
🛑 THIS MODEL HOUSES THE INTAKE AND EXHAUST FAN. TO AVOID RECIRCULATION / BURNOUT, MAKE SURE TO DISABLE THE INTAKE FAN WHEN USING THIS. 🛑 This exhaust vent mounts to the back of the Centauri Carbon using 3 M3*8 mm bolts. The exhaust vent…
Flat adapter for air extraction into a window with a diameter of 75 mm, for example for a laser. PetG no supports needed ********* Plochý adaptér pro odtah vzduchu do okna pruměr 75 mm, například pro laser. PetG nejsou potřeba podpěry
I made this simple exhaust hose adapter for the Sovol SV08 with the OEM enclosure, that comes with a 9025 fan. I wanted an adapter for 75 mm (3 in) hoses to save space. I couldn't find one, so I ended up making one. It uses 6x3 mm magnets…
Exhaust duct for BitFenix Prodigy case from 2012. Only compatible with AMD Wraith Prism CPU cooler in pull configuration. The idea is to use a 120mm fan at the top that will suck the air from the CPU cooler (pull configuration) so hot air…
A low-profile exhaust pipe/tube adapter adapter (75 millimeters) for xTool F2 (and maybe xTool F2 Ultra) for all small home owners. Pipe tolerance are the same as the official xTool pipes. To avoid tolerance distortion I suggest to print…
"Extra" accessory to get a working exhaust fan solution, after doing a top-mounted 360 AIO "upgrade" 15% infill, no supports. Material shouldn't matter, I used PLA because I ran out of PETG.
A small deflector which can be installed on the exhaust next to the seat / safety belt and redirects the heat away from the intake next to the door - the Webasto will not switch off too early then and the heating is more constant.…
This mounts to the elegoo centauri carbon at the case fan exhaust area and allows high flow to a 4" ducting connection. Printed in petg with 4 walls. Mounting flange is delicate, but works. Supports organic, on build plate only.
I didn't like the metal honeycomb pattern covering the exhaust port on the advanced filtration box. A Dremel cut off wheel and 5 minutes later... gone! As a finger guarding replacement, I designed this. It's meant for an opening that is…
A magnetic connection for exhaust fumes. Uses 6x 6mm D x 3mm H magnets and connects to 3in D tubing.
Model is probably an overkill, but I like the aesthetic of piping and was an interesting cad design exercise whilst waiting for the delivery of my Core One and then getting the Mk3.5 to build it for its successor. The main design purpose…
Print Notes: No support needed. Layer Height All bar the flaps, 0.2 mm Flaps, 0.1 mm (0.2 works, but 0.1 give better outcome) Extrusion width Set to 0.4 on all, otherwise the mesh will not be generated., also watch out for elephant foots…
This reduces/adapts the outlet on the back panel of the Qidi Q2 so that a 2.5 inch PVC dust collection hose can be attached to it. It requires 4 M3 screws. You can either thread the screws directly into the plastic (which works just…
I wanted to vent my new Prusa Core One L to the outside via a 4" duct to standard window vent kit often used with portable air conditioners. An existing vent adapter compatible with the Prusa Core One L did not yet exist, so I designed…
Same model but as others suggested I did the following changes: I added a "ribbed" line where you connect the hose to make it safer. Once clamped its not impossible for the clamp/pipe to slide off. I added a slot for the top screw, so you…
This vent is mounted in a blanking plate in a window opening to typically exhaust fumes from a 3D printer and interfaces to a 120mm fan or duct. 2 design variants are included Thread insert version 4mm thread, 4mm deep 3.3 mm hole for…
This is a carbon filter housing designed for the Qidi Q2 chamber exhaust fan . It helps to reduce odors and VOCs during printing by filtering the air exiting the chamber. Easy to install and compatible with standard activated carbon…
I printed the wall penetration section out of ASA, and the rest of the system from matte black PETG. Each piece has a socket for a male or female end, and I fused the parts together using Weld-On #3. Just apply a little on each part, hold…
My 3-year-old grandson loves using the new Fanttik X200, but he wasn't a fan of the exhaust air blowing directly into his face. I designed this simple adapter to deflect the air stream down and to the right . The deflector can be rotated…
An adapter to connect the creality exhaust kit ( https://www.amazon.com/dp/B0CP9DC7VF?ref=ppx_yo2ov_dt_b_fed_asin_title ) to my window.
Mounts to the back of the printer using 3x M3x10 screws and connects to a 100mm vent hose with a simple hose clamp Prints in 2 parts, so the exhaust can be directed either left or right and then glued in place using CA glue (superglue)…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
These brackets prevent the cable harness from snagging on the left corner behind the fan. They also serve as a mounting solution for the C1L. Unlike the C1, the C1L has no threaded inserts in the rear plate. The fans are secured with…
I wanted to do as little modification as possible to the printer just to make life easier. This remix removes the exhaust functionality of the printer and repurposed the exhaust fan to recirculate the chamber air and filter with activated…
Same model as what I remixed. Main goal was to slope the lip to remove the need of tall supports there and also add magnet pockets. The magnets I use are 6mm diameter 2.5mm thick. The pockets are slightly larger than that to allow room…
Summary These solid motor‑block bricks are designed to snap onto Duplo-elements, giving young builders the visual feel of engines and machines. Their one‑piece construction makes them safe, sturdy, and ideal for imaginative play without…
This is a simple remix of Mastakkos Core One Exhaust Duct. The original for me kept cracking at the junction between the cylinder and the flange face when removing the support material so I added a fillet around the joint for additional…
Inspiration I redesigned my exhaust duct v1 for much easier printer maintenance. Now it attaches and detaches effortlessly. Magnets give it a satisfying click. The mount might still work without magnets, but they're recommended if you…
I needed a 90 degree exhaust adapter for my xtool S1. I wanted it to use the same diameter exhaust as came with the S1.
English: After the original threads on the muffler started to strip due to age and vibration, I designed a suitable clamp. This keeps the muffler securely in place. I used Extrudr TPU 70D CF. ASA CF should also work. German: Nachdem die…
I bought this HOXHA Window Duct Kit off of Amazon to build an exhaust system for my 3D printing setup. I needed a duct cap to cover the exhaust port when I am not using it, I quickly 3D modeled this in TinkerCAD and put the LA logo on it…
Ventilation system for 3D printer/lasercutter/... . Easy to hook to the top of opened window and connect to a magnetic 100mm exhaust pipe. Could be printed from PETG or PLA. Construction consist of two parts. Print it as separated parts…
🐢 Above Tank Turtle Dock – Expand Your Tank Space All you need to expand your turtle tank and significantly increase swimming space by moving the basking area above the aquarium. This above tank turtle dock allows you to raise the water…
All the clips holding the heatshield under the gas tank were rotten away, so I have no idea what they looked like. These seems to work, but obviously might be subjected to high heat, so no guarantees on longevity. Print with your highest…
Balloon racer with simplified air ducts and axles + exhaust mouthpiece added for easy inflation with balloon attached.
The REV - Rotatable Exhaust Vent My PC sits directly under a wall-thermostat, which results in wrong temperature readings from the rising heat. To combat this, I created this exhaust vent that can screw onto the back exhaust of the PC and…
Good for hobby RC and other applications where intake diversion is needed. Helps keep dirt out as well. Can be directed forward on an RC car and used as a ram air intake. I printed it with TPU for durability but this is not needed. High…
The standard exhaust port on a Harbor Freight dust collector is a rectangular port that comes with a 5 inch adapter. Most dust collection systems use a standard 6 inch dust collection hose. This is a simple adapter that converts that…
Avelon Q exhaust Rear exhaust adapter for heat redirection. Print 2 units Enjoy the build! If this saved you some tinkering time or helped your farm grow, a tip is always appreciated. Crypto addresses in my bio. Happy hashing! DGB:…
SV08 / Voron 2.4 Exhaust Filter that accepts the BTT SFS v2 filament sensor. This is ONLY the filter housing/shell. You still need to print the other components from Nadir. I might look at a modified version with a 9025 fan mount for the…
I modelled this based on measurements from the original and made some improvements on the way. Outer diameter is 110mm, inner one 50mm. Screw holes are 100mm apart. Make sure it fits your exhaust, there are many different sizes out there.…
Convert Voron 2.4 Exhaust Filter to Active Carbon filtering option
-- you will need fitting heat set inserts -- highly recommend to print in PETG, ASA or ABS scale it to your needed measure inside the slicer / supports recommended for inner dome
As titled, this is to clamp on a 5in diameter pipe to provide a mounting face for a solar panel. The clamps are designed with M5 button cap bolts and m5 nuts. Required Hardware m5 bolts x4 m5 nuts x4 m3 heatset inserts x3 I designed with…
As titled, this is to clamp on a 4in diameter pipe to provide a mounting face for a solar panel. The clamps are designed with M5 button cap bolts and m5 nuts. Required Hardware m5 bolts x4 m5 nuts x4 m3 heatset inserts x3 I designed with…
As titled, this is to clamp on a 3in diameter pipe to provide a mounting face for a solar panel. The clamps are designed with M5 button cap bolts and m5 nuts. Required Hardware m5 bolts x4 m5 nuts x4 m3 heatset inserts x3 I designed with…
This is to hold the valve open on the AFE exhaust for the MK3 Ford Focus RS/ST. Printed in PA6CF to withstand high heat, no supports needed. Exhaust valve delete plug will be needed for the controller to avoid the 'exhaust valve…
This is a blank plug to cover up the connector to the OEM active exhaust controller. You will need at least a 1k ohm resistor plugged into ports 1 and 2 of the OEM connector. This was printed in PETG with support.
Custom Exhaust Extension for Bambu Lab X2D Please use v3 EDIT: I received feedback that the ejection is not working properly. Based on my observations, the X2D occasionally produces longer strands during ejection. To prevent clogging, the…
The Prusa Hepa/Carbon filter simply presses into the removable upper section of this design, then is quickly and easily snapped into place when you want filtration and/or to close off the enclosure for faster heating. The magnets in the…
