Window Exhaust Vent | Fume Extractor | Air Intake | AC air conditioner Ventilation | Roto WDC i8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vent for roof window. Usable as: fume extractor, air intake, AC exhaust
- Ocena
- 0 / 5
- Polubienia
- 132
- Pobrania
- 505
- Wydruki
- 0
- Wyświetlenia
- 8634
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this, in order to extract fumes from soldering and 3D printing directly out of the closest window. For this I use the AC Infinity Cloudline A4 duct fan.
The model consists of three parts that can simply be stuck together. The air inside the model is guided through four flow-optimized channels. A 100mm (4inch) hose can be connected at the front.
Following use cases are possible:
- Fume extractor
- Air Intake
- AC exhaust. Note: The opened gaps on the side of the window have to be sealed with an insulating material.
The model was designed for following type of window: Roto WDC RotoComfort i8
I also uploaded the .stp-files so you can adjust it to other window designs.