Liczymy pasujące modele…
Support my work +++ I will do my best to maintain and improve the project with incremental upgrades, but maintenance takes time and effort. If you wish to support my work and motivate me please consider to give me a donation +++…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the holder for an inductive sensor on a Pipersberg G4 RF1 c . It is used for an 18mm sensor with which I got more stable readings. It also comes with a thicker bolt that fits more tightly in the little cavity. I have…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here you go a new design if you dont want to buy a garden hose nozzle, quick 3D print with only 47min. Increase the preasure water Cheap Quick Print that takes 47min Note: Please put a hose seal to prevent leaks in the threads section.
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
This part fits on water meters with two screw pillars on the glass. One side has a slotted hole so the offset of the induction sensor to the pointer can be adjusted. For my water meter (Kiwa sensus) the center to center distance of the…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modified so the part cooling duct and extruder cover/fan mount is 8.3mm lower to suit the standard Phaetus Rapido and volcano hotends. Only the version without LED mount provisions is provided. EDIT: By request, have uploaded a 3mm version.
Wydruk około 2,37 €–2,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
11 Aug 22 - I've since made a better version, based on the remixed Delta P X2. It uses a modified extruder cover/fan mount and part cooler but keeps the original internal design intact.…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
Disclaimer: Due to duct tips having close vicinity to the nozzle, use at your own risk of failed print depositing globs covering/melting the ducts. Low-profile part-cooling duct for stock Creality Sprite Sprite-Pro extruder 40x40 part…
This fully parametric cable duct is designed to help you neatly hide your nasty cables. The cable duct consists of a base and a lid, which can either slide on from the side or simply snap on from above. The lid fits flush with the base,…
Update : Revised STL to rotate matching recommended print configuration and repaired non-manifold issue some people experienced. The stock S1 cooler isn't exactly great, and I wanted a bi-directional cooling design with a stronger 5015…
I want to install a reasonable cable management in my 3D printing cabinet. What is closer than the channels to print. Sneakypoo was so friendly to design one that I just had to enlarge. The STL files are not completely bug free so only…
This is an adapter to connect a 120mm PC fan to a 4 inch duct/pipe/dryer hose. I know there are already models like this out there, but I always find something I wish was done a little differently, so here's mine. It has the following…
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips/files Edit: Added color separated plates for remake color scheme. Paint apps: head - yellow, white, black, green for details. chest - yellow, black…
Creality Ender 3 S1 Creality Ender 3 S1 Pro High Flow Modular 5015 cooling duct sprite extruder This a more refined version of the Ender 3 S1 Twin Jet 5015 Fan Duct that is a little easier to print (less supports). It also doesn't require…
Internal recirculation air filtration duct for AD5X. This model use the same 24V 5015 fan/blower model as the one found on the toolhead with 4 wires. This allows PWM capability and interchangeability. The mod help reduce fumes and…
New Hips! These are better: https://www.printables.com/model/954477-dummy-13-improved-hips/files Edit: Added articulated Jaw. Assemble the jaw before putting in the frame piece for the head. adding onto EVA-00. Head extracted from…
I made this for the NeedItMakeIt fan duct contest and it won! It's a lightweight high performance fan duct for the FLSUN T1. This was a first attempt at a fan duct (for a printer that I don't even own lol) so I'm pleased with the results.…
🇪🇸 Welcome to Roman Hispania! Legado3D is an archaeologist that does digital preservation of historical legacy, and they are taking us back in time to the Roman Empire with this model! The Aqueduct of Segovi a (Spanish: Acueducto de…
A sexy one line wall art. Easy to print and attachable with a nail. You can also buy this product on my Etsy-Store: emberwork.de
For those with the K1 model, I have specifically crafted a fan duct that conforms to the real-world constraints of this model. It attaches to the lower frame of the printer, requiring only the substitution of the original screws with…
***IMPORTANT*** Some users have experienced difficulties snapping the fan in place. Please measure the fan duct to confirm your printing results have the recommended measurements before installing the fan. If your measurements are not…
This custom fan duct has been designed for use with our custom side panel for the Framework Desktop mini-PC. In combination, both parts can make it run 5-7dB(A) quieter. See this blog post for further info:…
Cable duct for Voron V0.1 or V0.2 that houses the Klipper Expander. Klipper Expander allows you to add additional functionality to your V0 / V0.1 when using an SKR Mini or SKR Pio board. I'm currently using it for another NeoPixel plug…
Update: Stronger V2 Head design and ability to install without moving the ABL Sensor! I really liked how Maker Hangtight " https://www.thingiverse.com/thing:3179892 " designed this hotend & duct and wanted it for my Anycubic Kobra Go.…
…Please be sure to hit like & post a make, I'd love to see your prints! Add a highly accurate M12 LJ12A3-4-Z/AX inductive probe to your SV08! This probe is a NPN NC probe. This means it is normally closed & will provide a “low” signal…
I took the factory hotend mount model and remodeled it to accept the X gantry Voron Clockwork 2 left and right mounts. Since the SV06 has its own probe and uses sensorless homing I removed unneeded geometry for belts, probe mounts etc.…
Description System for the magnetic connection of machines and fans with 150mm / 6 inch hoses. Can be used e.g. for laser cutters, soldering stations, welding work, vacuum cleaners, shop vacs or planers. All connections and adapters are…
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System frame/"bone" elements produced by Lego from 2011-2016 for the Heo Factory and g2 Bionicle lines. All elements are compatible with one…
Update: Ahmad has created a version 2 of his design - please go check it out and donate to him: https://grabcad.com/library/mbot3d-mk2_rev2-0-ender7-style-fan-duct-1 Important: This is a remix of…
After realizing my factory fan duct was broken I quickly drafted this replacement fan duct up to get back to printing. I am currently testing this in PETG (ABS recommended) and will be providing a couple of improvements soon. I will…
This is a full chess set containing a board with a large induction coil in the base and chess pieces with LED's inside each piece receiving wireless power through the chess board through induction. All pieces are build up from 1 ‘base’…
I needed a system that allows me to quickly connect and disconnect the ventilation duct of my air conditioning to take advantage of the same ventilation duct and occasionally connect my Prusa Core One or my Creality K1C (coming soon) to…
This is the original fan duct of MK3, but I modified the middle 2 openings to make them a little bit smaller on the front, since it cooled the tip of my hotend so much to clog the extrusion. This way the air is forced in a more downward…
Made some remix,and modify a 14cm version
This set of files includes 3D-printable recreations of most Creature-And-Character-Building-System armor elements produced by Lego from 2011-2016 for the Heo Factory and g2 Bionicle lines. All elements are compatible with one another, as…
Design Concept The Scarlet model embodies elegance combined with a hint of mystery. Her flowing attire and subtle pose enhance the character's captivating aura, perfect for those seeking a distinguished piece for their collection. Purpose…
May 7, 2025: I added a version of the v2 model that used short M3 threaded inserts instead of the nuts. Edit: I have added a “Slim v2” model set that keeps the probe closer to the extruder and allows more room for the lever on the…
Baby Ape 3" ducts will fit perfectly. 5 inch ducts will fit any quad using 5" propellers. These don't have a full duct shape but offer a middle ground allowing for fitting in most places.
no supports needed. i printed it with pc blend by prusa.
Used the nice design of the V2 R2.2 duct (by teookie) combined with the new flow remix (by BuildX) and added M3 inserts. I also hid the V2 R2.2 logo.
While a wonderful design the Red Squirrel fan duct is incompatible with Ender 5 style printers due to the fact that the tool carrier is wider and the 5015 fan does not fit as designed. I sliced the provided step file and moved the fan…
Use case Air coils give the best possible Q factor in L-C filters or oscillators, as they are used in radio technology by commercial manufacturers and amateur radio hobbyists. For private projects they are extra convenient, as they can be…
Dragon Burner remix for 8 mm diameter inductive probe, tighten the probe with M3 screw. OnShape: https://cad.onshape.com/documents/e60d6bbb7afa598d50a74769 Offsets (from OnShape): X: +31.300 mm Y: -17.418 mm
Like my 12:1 speed reducer for TT type motors this is a 21:1 ration version. Simple to print and compact in size. Great for sequencing.The video is here. https://youtu.be/WvyS8wwAOy0 The video for the 12:1 ration unit is here.…
Customizable OpenSCAD source for creating coil formers for pots and bobbins. Two matching parts design. STL file is for first example photo, outer diameter 33mm, inner/core diameter 15mm and overal height of 17mm. Category: Electronics
This is a remix of the fan mount from Baphomet. It is meant for a 5015 radial blower fan. I have included 2 different mounts, depending on the type of sensor you have. I used a 12mm (diameter) inductive probe but found it was inconsistent…
Description I couldn't find a free reduction gearbox design for a Nema 17 stepper - so I made one myself! My design only requires 2 608 skateboard bearings and a bunch of m3 screws. The drive works with the cycloidal reduction principle…
I despise M2 screws. They're impossible to install. They use a 1.3mm hex that strips if you look at it wrong. This remix gets rid of the M2 screws and uses 2x of the existing screws from the OEM assembly. The intake and fan mount slide…
This mod is an upgraded mainboard cover for the Qidi Plus 4, designed to optimize airflow and cooling with an 80mm fan. Its focused ducting system enhances heat dissipation efficiency, keeping internal components at optimal temperatures.…
Remix of stew675 's beacon bracket, added air duct for stock and Phaetus Conch hotends M3 nuts (fan mount ) and m3 inserts or m3 square nuts (beacon mount ) required to make it work Normal supports needed , all print settings and material…
Hello again all! This shroud is a remix of the Kobra 2 Mantis shroud that I have linked here, adapted for DrewDeeDoo's Twin fan “Double Trouble” Duct . This shroud will eliminate any negative space leftover by the old stock shroud, and…
Simple dual 4020 blower fan cooling duct for BIQU H2. Simple and low profile, it is height adjustable via the 2 mounting slots that connect directly to the H2. print gets fairly thin by the duct so .4mm nozzle or smaller would be best,…
The improved fan duct is a remix of a very good upgraded fan duct from KalleKnall. https://www.printables.com/model/39679-prusa-mk3s-and-mk3s-fan-duct-with-pinda-support. I've modified it so it will fit as a direct replacement for the…
Introducing the no-frills, no-strings duct your SV01 will become an instant fan of :D. Designed with PETG in mind. A sagging-resistant design, it will not bump into your prints. Minimal path air flow that will not cool the nozzle. Rev.2.1…
The original holder for the inductive probe / sensor on my Sovol SV06 was cracked, so I designed this to hold it instead. Why this design? The original Sovol design isn't easy to print, and it requires heat-set inserts. Other designs I…
This is a tiny cycloidal drive designed to fit a NEMA17 stepper motor Reduction: 19:1 The cycloidal ring has been designed to be interchangeable, so if you want to fit a higher/lower ratio cycloidal setup, you only have to print the disk…
Modified the Red Squirrel fan duct to fit my needs : adjusted holes diameter to fit M3 screws better made the 5015 fan holding arm and clamp thing beefier to not break when screwed removed the top cable guide added a bltouch mount See the…
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 80mm fan. 70mm version and additional details are avaible here: https://www.printables.com/pl/model/107553-wd-mycloud-ex2-ultra-fan-cover-replacement-noise-r…
This is a cycloidal drive with a 0.3 mm eccentric shaft and 2 wheels to cancel out the vibrations caused by eccentricity in the shaft. The reduction ratio is 1 to 80 .
This is a lightweight, efficient fan duct designed for the Anycubic Kobra S1 . By optimizing the airflow directly through the heatsink, it improves cooling efficiency, prevents heat creep, and helps eliminate frustrating filament clogging…
If you have a Bulkman3D Ultimate Bee and want to upgrade from mechanical limit switches to significantly more reliable and accurate induction proximity limit switches, here are mounts that I designed to use factory bolt locations. Using…
my mount for my stock probe broke so i downloaded the file provided by sovol and made it more optimised to 3d print instead of injection mold. by making parts that would have been hollow into solid objects. i printed it in petg to reduce…
Use the FCStd files if you wish to change the models in FreeCAD, and use FreeCAD 1.1 or later. Use the STEP files if you wish to change the models in some other CAD. Use the STEP or STL files to print as-is. The STEP files may need to be…
Ender 3 v2 ABL + BLTouch mounts MinionD Ender 3 / PRO / v2 dual duct https://www.thingiverse.com/thing:4819097 Velocity Stack for MinionD dual duct https://www.thingiverse.com/thing:4861232 As requested for the Ender 3 v2: 08/06/2021 -…
This is the WD My Cloud EX2 Ultra fan cover replacement modified for 120mm fan. 70mm version and additional details are avaible here: https://www.printables.com/pl/model/107553-wd-mycloud-ex2-ultra-fan-cover-replacement-noise-r…
Watersensor enclosure. Fits on the Sensus 620 watermeter as used in the Netherlands. Includes holder for an ESP8266. This is a remix of the “P1 Monitor watermeter ZTATZ sensor mount” by Sp4wN on Thingyverse. I added the ESP8266 enclosure.…
A way to charge all your Google devices in one space. This needs a pair of Yootech wireless charging pads plus the pixel watch charger. Prints in 3 pieces which have the wires run through them before sliding together with friction fit.…
Description This stand can hold your inductive charger for : - Your Samsung S3 Frontier Watch - Your EP-P1100 Samsung Phone inductive charger Hold are tight for both of your charger. This is a Remix of 2 design : 1) Phone Stand Design…
The proposed modification to replace the ABL sensor with an inductive sensor makes sense if the printer is equipped with a metal PEI board. Additional comments. The PRUSA SUPERPINDA sensor has a standard deviation of less than 0.005. The…
Probe moved off from the body to avoid collision with the shroud
I wanted to mount a 4" exhaust duct through a casement window to vent ABS fumes from my printer, so I made this backing plate for https://www.printables.com/model/474337-120mm-fan-to-4-inch-duct-f3d-file-for-other-sizes so that I could…
If you want to install the Phaetus Dragonfly hotend, you need a bit different fan duct. For that reason, I have created this one Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Doesn't Matter Resolution:…
I had a spare PINDA probe and an Ender 3 with no ABL so I had to put them together. Most of the STLs that I found for mounting inductive probes utilized the 8mm nuts and I didn't have mine. I decided to create a "clamp" type bracket…
Mod of fan duck to fit sunon drives and use 8th driver in octopus.
Extrusor para materiales flexibles, se puede acoplar en prusai3 o similares. Especialmente diseñado para estos materiales, la idea es dejar el menor espacio posible entre la rueda tractora y el PTFE. así impedimos que el filamento se…
Updates 08/2025: Added a couple of end plates for 150 mm flex ducts. This version is untested - feel free to report your results. Description A set of adapters to connect generic 150 or 160 mm flex duct to a Midea / Comfee Silent Cool 26…
Cooling duct for the stepper drivers for my custom Voron build. It suites 6 or 7 steppers drivers. Pick the file you need. Note: didn't test the 7-stepper driver version, since my printer has only 6 (extruder is on the toolhead board).
The Artillery Sidewinder X2 is shipped with an inductive sensor that can be installed in case the Artillery touch sensor is broken and no replacement is immediately available. This small adapter allows to use the inductive sensor as a…
I was building a BENTO box filter for my AD5x and discovered the print bed would clip the bento box with the original FlashForge Adventure 5M BentoBox Fan Duct. It is strange this occurred as the 5M and AD5x should have identical…
This naughty little Valentines bear is ready and roaring to go this Valentines day. Why not show the special person in your life that this Valentines isnt just about love.. its about getting it on ;) Hope you enjoy!
print solid, print upright, use organic supports need 4x m3 knurl nuts for mount and 4x m3 knurl nuts pushed into fan
A fan duct for Phaetus Rapido which utilizes a 40mm fan. Has a locating lip near the bottom to prevent upward movement due to the heat sink's conical shape. Category: 3D Printer Parts
Supported Hardware The following versions and probes are supported: 8mm: LJ8A3-2-Z/BX 12mm: LJ12A3-4-Z/BX 18mm: LJ18A3-8-Z/BX Offsets X: 2 Y: -33 In case you want to preconfigure Marlin using Configuration.h , you can use: #define…
Remixed in order to use my own ABL probe supports
Hello fellow makers, I made a fan duct for my Phaetus Dragon hotend, dual 4010 part cooling, BLTouch support which fits perfectly on the Ender 3 gantry. What you need: Phaetus Dragon Hotend 1 or 2 4010 Blowers 4010 cooler (1 used a…
This mod dramatically improves the hotend performance of the Ender 3. The "coldend" will be cooled way better compared to the original cooling solution. Also, the performance of the part cooling fan is increased significantly. The overall…
This is a remix of Nitec0re's ducted 5015 blower stepper driver cooler that's made to use a 30mm or 40mm fan. This thing prints in two parts & snaps together. The fan mount section contains fins to rectify the airflow coming from the…
Allows you to mount a Juggernaut Case Inductive Charger Mount to the windshield adjustment handle of the Triumph Tiger 1200 2023/2024 model year. May work on other model Tigers but untested. Additional Parts Required (as pictured): 4x…
double sided air duct for original fan
!!!Warning!!!This model is still in progress!!! A shroud witch works very welll with hotend Phaetus Dragonfly BMS, 5015 fan on Ender 3 V2 Neo with have magnetic mount round and cubic. Print Settings Printer brand: Creality Printer:…
This is a simple mixing eductor that one can use for in-tank mixing applications. The spars are a bit weak due to the thin walls but it's functional. Instructions Print at 100% infill with zero shells. Adjust the size to fit your piping.…
Satsana Duct 5015/4010 with support to BLTouch and Pinda inductive probes remix This is a remix of the amazing Satsana Ender 3 Fan Duct by eric-anastas and max_davis's remix to support the BLTouch probe. Main enhancements of my remix:…
I remixed this, took a little plastic off the middle. Slightly enlarged the Heaset holes and added a spot for an inductive prove. the x offset is +43 the y is -13. Printed in Esun ABS+ Category: 3D Printer Parts
Customized version of https://www.thingiverse.com/thing:3132978 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3132978 Instructions Using the following options: width = 35 height = 22 length = 200…
I got a free Tarantula Pro with a creality hotend which wasn't mounted and the Creality fan shroud. I decided to adapt it to an E3D V6 for printing Nylon and CF-Nylon so I designed up this part. Mounts with two M3x18mm (or 20mm) flathead…
Get that perfect first layer with a simple inductive probe! No loss in printable space, installed in just a few minutes. Please be aware that this only works with a metal print-surface. Im using the endstop from a sidewinder X1, but you…
jde jen o redukce v napojovem drzaku drzak mam u me v modelech také
This is a remix of the "FANG-oz-40mm-MicroSwiss" fan duct from thing:2763931 by ozfunghi to work with a Phaetus Dragonfly BMS hotend. If your hotend is from Trianglelab instead of Phaetus, that should be exactly the same. I've added some…
![Sentinel Inductive Probe [2020]](https://media.printables.com/media/prints/553721/images/4444124_63ad2830-f903-4587-84cf-6ba28e5a610d/img_20230815_132950.jpg)
