Prusa MK2/MK2S/MK2.5/MK3 R3 angled fan nozzle duct remake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the original fan duct of MK3, but I modified the middle 2 openings to make them a little bit smaller on the…
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 494
- Wydruki
- 9
- Wyświetlenia
- 3482
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is the original fan duct of MK3, but I modified the middle 2 openings to make them a little bit smaller on the front, since it cooled the tip of my hotend so much to clog the extrusion. This way the air is forced in a more downward stream to cool the filament on the layer and not on the nozzle.
Print instructions
Category: 3D Printer Parts Summary
This is the original fan duct of MK3, but I modified the middle 2 openings to make them a little bit smaller on the front, since it cooled the tip of my hotend so much to clog the extrusion. This way the air is forced in a more downward stream to cool the filament on the layer and not on the nozzle.