Liczymy pasujące modele…
I made this model because I wanted a way to show my interest in 3D printing without buying a shirt from a This is a 3D printable nozzle-style necklace designed for people who want to show their interest in 3D printing without wearing…
This "Hood"/Bracket allows you to evenly disperse foaming evaporator coil cleaner when replacing cabin air filters in the Tesla Model 3. Remix of https://www.thingiverse.com/thing:4861123 inspired by:…
Adapter for 5015 5V fan to round pipe. Sized for 10mm ID PVC piping. Epoxy or glue in place Decrease layer height for better quality. Print nozzle facing down to eliminate support requirements.
15 cm Long Crevice Tool - 1.5 cm Diameter (Nozzle) Designed for precision cleaning in tight spaces. Ideal for reaching narrow gaps and hard-to-access areas, it is perfect for tasks like car detailing. The outer diameter of the adapter is…
Here is a recovery bin to complete the creation of apopticon, thank you for its creation https://www.printables.com/model/838334-flip-down-front-nozzle-scrubber-for-prusa-xl Thanks also to Surfalex2000 for gcode…
This is a Gridfinity-compatible holder for icing nozzles. The nozzles shown in the photos have a diameter of 18mm. As seen in this video:
Amazon shipped a small water pump for a fountain with no nozzle to connect the hose to, printed this one to replace it, maybe you need a replacement too. Should work with any pump that has a 13mm inner diamater outlet to connect to an 8mm…
Nozzle holder for baku 852 smd rework station. Nozzle diameter 22 mm. Require 2 magnet bars 19x9mm
This is the remix of nextruder nozzle tray from pachek, only with 3 holes.
Nozzles for the Ryobi PCL733 1 Gallon Wet/Dry Vac. These are created from Zivbot's "Customizable Vacuum Tool" SCAD files. In case you need to make adjustments, SCAD files with the parameters I used to create each nozzle are included.
About Gridfinity holder for 3DJAKE Nozzle changer kit (CB-DW5B) - just the top, which can be pushed in into any 1x1xY box - I took 1x1x3 pmcquay bin as a base in it. Please give a like and post makes and provide comments for further…
Silicone/Caulk Threaded Nozzle Cap for unthreaded nozzles
EDIT 20.08.2025 -added a 6.2mm hole version because some nozzles can fall through the original design -if you don't know which version you should print, choose Skadis Nozzle Holder 6.2 mm Nozzle-organiser/Holder for the Ikea-Skadis system…
Brush for manual cleaning of the nozzle, a silicone brush is used from bambulab
Improved version of the initial Nozzle holder / size indicator (https://www.printables.com/model/865318-nozzle-holder-size-indicator) The nozzle holders kept sliding off when handling the package. Now they are fixed without tools to…
See the original model for a full description.
Important: Requires additional hardware: 4x - M4x40 (DIN 7991) 4x - 10mm spacers (4mm inner dia) 2x - Zip Ties 3.5 x 200mm Max printing height will be reduced by 10mm (as we need to raise the bed by 10mm to avoid crashing into the wiper /…
This original idea was on one for the Voron, but I liked it so much I use it on all my printers now. The goal of this design was to, in the spirit of open source, allow people to make their own silicon brushes using all DIY parts. In this…
Aufputz Gehäuse für 2er Steckdose oder Schalter - auf 0,15mm Nozzle bemaßt SLDPRT Datei anbei.
The stock baskets ran straight into the Y axis linear rails mount I'm working on, so I had to make something flatter. I also realized that the stock baskets are annoying to empty so I'd rather have a solution where the waste can…
Witam! Prezentuję szeroką końcówkę odsysającą do odkurzacza marki Festool i innych z możliwością przytwierdzenia do dowolnej powierzchni. Pozdrawiam!
Here is a simple and effective nozzle holder for the HSW system by RostaP ! Dimensions Holes are 5.5mm wide for M5 nozzles or 6.3mm for M6 nozzles Printing There is suffisant play everywhere so you don't have to scale anything. It can be…
Print it however you want, but I used 3 perimiters PETg 15% infill 0.4 nozzle/ 0.2 layer height Parts Required: 2 x M3x10 2x M3 hex nuts The tolerance for the nuts is very tight. you may need to use a pliers to get the nut into the slot.…
The solutions which glue the brush holder with double sided tape to the heated bed did not work when the printer bed heated up and then the brush came loose. This holder get screwed between the screw wheel and the bed support front left.…
If you need a different diameter, send me message. I can create and send any diameter Borehole Cleaning Aid ensures that your hands are free when working with a drill. Mounted on the hand-piece, this accessory automatically secures itself…
Pipe flushing nozzle for 1/2” garden hose If necessary, secure the nozzle with a cable tie to prevent it from coming loose. I printed mine from TPU, as this has very good layer adhesion and practically cannot break off.
Gridfinity 1x1 holding 4 Creality nozzles in the square plastic tube, might also hold other brands or other objects: Fitting square sizes: 12.5x12.5mm ~ 13x13 mm
NB I made an update on the original so it does not hit the brush when you do a auto bed level. Now this part G1 X87 Y-16 Z4 F5000.0 ;Wipe 1G1 X46 Y-16 Z4 F5000.0 ;Wipe 2 G1 X87 Y-16 Z4 F5000.0 ;Wipe 3 G1 X46 Y-16 Z4 F5000.0 ;Wipe 4 G1 X87…
Simple nozzle holder for Prusa MK3s, which you can put on the top of the printer. It can be printed without support.
I have been FDM printing mini's for a decade. I am publishing my latest settings. These are for MK4 but the settings should apply to any other printer. Updated June 2026: I made some changes as well as argued with AI for further insights.…
As an owner of a Prusa 5T XL, I keep 5 of each nozzle type. I designed this case to keep all my nextruder nozzles organized in sets of 5. I peel the labels off the original cases and stick them onto my 5-packs. Check out my other Prusa XL…
UPDATE: Updated the text on the model. Still working on a newer version and a non gridfinity version. Just don't have the time to finish them. I saw Flashforge had .25, .4, .6, and .8 nozzles for sell on Aliexpress, so I decided to make a…
A replacement nozzle cooling system with a duct to fit an 80mm fan. Haven't tried it yet as I'm looking for a way to convert 24v to 12v for the fan. Check out my other model for the fan Duct:…
I made these for the contest but I ended up enjoying it a good amount so Enjoy!
🇨🇿 Prodloužená spárová hubice kompatibilní s vysavači Karcher. Ideální pro úklid úzkých a těžko dostupných míst, jako jsou mezery mezi sedačkami, rohy nebo štěrbiny. Hubice je široká pouze 1 cm, což umožňuje snadný přístup i do nejužších…
I am using more diverse types of filament as well as a wider range of model types and wanted a way to keep track of the details of the currently installed nozzle. I saw some folks using signs but with a lot of combinations that felt…
3D‑Printed Silicone Nozzle Brush Holder for Prusa XL (Compatible with Bambu Lab A1 Mini Silicone Brush) This 3D‑printed holder is designed to securely mount a Bambu Lab A1 Mini silicone nozzle brush and use it as an effective nozzle…
Düse zum Durchspülen von Trompeten. Anschließbar an jeden haushaltsüblichen Brauseschlauch (½ Zoll Gewinde). Auch geeignet für Flügelhorn, Es-Horn. Nozzle for rinsing and cleaning trumpets. Can be connected to any standard household…
********* UPDATE 28th March 2026 ******** New nozzle design that has a cone inside the threaded hole that punctures the glue tube and seals around the glue collar. This means no more glue leaking from the threads ... now makes a perfect…
Based on printing material, you may need to increase or decrease the scale, this was designed for ABS which has a shrinkage of around 2-3%, less contractive materials may need to be printed at 99% or 98% scale.
Eta battery vacuum cleaner reductin nozzle to 32mm outer diameter 2 versions (both is simmilar, but v2 has only different geometry) outer diameter is 31,8mm for better compatibility Print settings 0,2mm layer 4 walls no supports use outer…
Vacuum cleaner nozzle (inner diameters 32-35-36mm) Print settings 0,2mm layer 4 walls no supports use outer brim min 10mm
I liked the various Gridfinity bins that are available to hold Bambu spare parts, but I could not find any for my K2 Plus parts, so I created a few using the FreeCAD Gridfinity workbench
I liked the various Gridfinity bins that are available to hold Bambu spare parts, but I could not find any for my K2 Plus parts, so I created a few using the FreeCAD Gridfinity workbench
1x1 Multibin Top remixed to hold 16 Volcano nozzles
Here is my 5 nozzle waterer! Commercially available hose attachments always seem to either create a slow to use fine mist or various stupidly powerful jets that are great for cleaning cars but rubbish for garden watering!! This is…
3D Printed Vacuum Nozzle – Universal Adapter for Detailed Cleaning Free See My 3D Models See My Website Improve the reach and precision of your vacuum cleaner with this 3D printed nozzle, ideal for cleaning tight spaces, grooves,…
These are extensions of the Nilfisk Vacuum Cleaner Buddy II, but it can be used with any vacuum cleaner that has the hose with an internal diameter of 35 mm. Total length 240 mm There 2 models: One has a small angled tip and the second…
Are you tired of the poor camera quality of the Creality Hi? Wish you could see your prints with clear resolution and night vision? I was frustrated with the camera quality of the stock camera in the Creality Hi, as are many others. I…
Printer Custom G-Code for the nozzle wiper: ; ; Wipe nozzle ; G0 X82 Y-16 Z3 F8000 G0 Z1 G0 X40 G0 Y-13.5 G0 X82 G0 Y-10 G0 X76.8 G0 Y-16 G0 X71.5 G0 Y-10 G0 X66.2 G0 Y-16 G0 X61 G0 Y-10 G0 X56 G0 Y-16 G0 X50.8 G0 Y-10 G0 X45.5 G0 Y-16 G0…
This is a vacuum nozzle to fit a 32mm pipe of an Electrolux Cyclonic Lite. Printed using black PLA and 3 walls. Infill makes no difference. Fairly tight friction fit to a 32mm pipe nozzle.
It uses 3 parts the left, the middle and the right part, if you want to use it for more than 2 nozzles print the middle part as often as needed for your nozzles. -You won't need any supports for the print
This remix provides a trimmed Silicone Nozzle Cleaner for Creality K1/K1C/K1 Max based on this model, in order to prevent collisions with the HEPA filter adapter available here . Collisions are avoided when the cleaner is both down and…
PoolVac 32/22 – Universal Pool & Pond Vacuum Nozzle This 3D-printed nozzle turns any standard telescopic pole and corrugated hose into a powerful DIY vacuum for pools, hot-tubs or garden ponds. The upper port fits a Ø 32 mm hose, while…
Various nozzles for Black & Decker vacuum cleaner - Aspiration usually keeps the nozzle in place. - Alternatively wrap arround the interface a few layers of duct tape to increase friction - The mounting interface can be enlarged or…
I don't like the various water hose attachments as they drastically reduce the cross-sectional area of the hose and cut the water flow. so I made a friction-fit nozzle that slips over the hose from the outside In hopes that this design…
Advisory: This model has a tendency to snap. If it does snap, do not try to glue it together. That will only make it worse! Details: So I saw the A1 Nozzle Brush for the right on the RH3D Discord but it would not work for the right so I…
This model is intended to be used with MandalaRoseWorks bed arms. It uses A1 mini silicone brushes (6x26mm size), such as https://a.aliexpress.com/_EIe1RSC I've also added a mod for two brushes, in case you want more space for your custom…
Basic nozzle cleaner before the start of printing. Printed in ABS Quality 0.18 No supports needed, printed 20% gyroid infil Code to be added in the start print section, just after the first line drawing. G1 X1 Y-14 Z0.25 F20000.0 ;drag…
Nozzle for the AC-27 electric air duster because it doesn't come with any attachments Category: Tools
I removed the loop from the model and did some scaling so it would fit the spoke with the center of the nozzle being the spoke of the bike tire . at current scale it fits nicely on my lectric xp spoke but is a little loose on my mountain…
this will fit on presta valves that have a threaded shaft it doesn't twist on to the upper most part pf s presta valve.
Just the four nozzle storage bin based n Gridfinity system with the addition of the space for the heat sink in the new nozzles. Not stackable as the original (no lip), 2 x 2.
This model was created specially for using with Volcano nozzles, but it works just fine with original (proprietary) sovol nozzles. NOTE! You need to extend the cable for about 30-40mm so it reaches the connector It is recommended to print…
Original description: On the Prusa MK4, nozzles can be cold swapped. The procedure is actually far easier, faster and likely safer than removing the heat block as originally documented. After having cleaned your nozzle as documented…
Uses the original model and adds in a USB sized handle to make for easier storage and purchase when in use.
With this spray can attachment, the chain can be evenly sprayed on all sides. The attachment can be mounted onto standard spray heads and extension tubes. Inside the attachment, the liquid is distributed through channels to 6 nozzles .…
Nozzle for Dyson V8 and Newer Models – 110 mm x 10 mm This thin nozzle is designed to fit Dyson V8 and newer models. With a width of 110 mm and a thickness of 10 mm , it is perfect for tight spaces and hard-to-reach corners. Key Features:…
I needed a vacuum cleaner nozzle that would fit in small holes to remove dust. So I made this version. The picture of my 3Dprinted version shows the first version. The bottom of this version turned out to be too short. I extended it in…
This is a storage box for printer nozzles, based on the design with magnetic lid. I however wanted more secure locking so I added a threaded lid. It also means that no magnets are needed. The lid's basic shape and thread geometry were…
I needed something to wipe oozes from the nozzle, and after trying the original model, I decided to remix it a bit. I use Bambulab style silicon pad and raised the pad for more clearance from bed. First printed out of PLA, but the nut…
I replaced the silicone nozzle wiper in my Elegoo Centauri Carbon as part of the machine maintenance, but rather than throw the old one in the bin again I turned it into a simple manual nozzle wiper brush. Worn out silicone wipers are…
I am sharing the gcode I worked out for this multi-tool painted model, that started with BBprintsthings's very good Sitting Rabbit print. I made a larger and smaller version, and there is no problem at all with the scaling. I've included…
Note: If using the new Core One + Automatic Vent Opener then the right hand version must be used to avoid a collision Edit: New, tweaked the left side to be out of the way of the fan shroud when the head is in the lower left corner (0,0)…
I made this to support my new Cryogrip Glacier plate. I placed it on the right side so the nozzle wipe procedure won't cause the print head to bang into my Unifi G4 camera. Apparently, the right side is the way to go if you have a Core…
Edit: This mod is confirmed to not conflict with the Core One+ automatic vent control. This is a remix of the excellent nozzle wiper by Ed and PCR, which adds a slot to use a spare M3nS nut from the Core One assembly kit to fix the part…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker There are two types, one can accommodate a 20mmx6mmx2mm…
The brush handle uses one piece of the Bambu Lab silicone nozzle wiper for the A1 printer . Just insert the wiper into the brush head, and you’ll have a simple, durable tool for wiping filament residue without scratching the nozzle.…
This model gives you the basic locking mechanism for nozzles. Attachments snap in place with a small twist, so you can easily build and adapt your own custom designs.
This model allows you to hold up to two Nextruder assemblies on the Prusa Side Storage door. It could also hold just basic nozzles as well. It will press fit into your door, so no glue should be required. You can always slightly resize in…
I lost the bulkhead for my flex and couldn't find one. Save yourself 10$ and just print this one. I used this nozzle with it. Enjoy. https://www.printables.com/model/819851-fluval-flex-15g-low-flow-spray-bar Supports aren't necessary,…
This is a remix of a temp tower for the Core One, using a non high flow .6 nozzle. This is what I used after installing a .6 Diamondback nozzle, as there is a rather large thermal conductivity difference between the brass or obsidian and…
Differences from the original model: Added nozzle logo on the top, which you can print separately in a second color Added chamfers on the top and bottom (for looks and nice feel in the hand). Also added some smaller chamfers wherever I…
print how ever you want i used tree supports and standard settings Nothing special, I'm not good at modeling i just tossed this together. I wanted to add nozzle wipe to my NG and could not find a simple one so i made one. I've yet to do…
Elegoo Centauri Carbon LED light at nozzle height I wanted light at nozzle height that would not be obscured by the print head. Electrical work on the printer is at your own risk! I accept no responsibility for damage! I believe I have…
Made simple nozzle sign to clip on the door of the Core One The sign is made of PLA; first layer orange or black (or every color you prefer) The holder is made of Petg. I used the text marking on te nozzle (the Fusion-file is included to…
It holds 2 extra nozzles over using two 1x2 holders. That's pretty much it.
Z Endstop If you want to install the endstop sensor in your Ender 5, like I did, so that the nozzle is the 0 point, this part is for you. You can also install the Z axis Home separately and install the Klicky. I found it very useful when…
I know you all wanted this. Here is the Flashforge print nozzle storage box with the finger grabs AND the Flashforge logo on top of the lid. The “F” of the diamond logo is separate so you can infill it with the FlashForge blue if you…
Slight revision to the original 3 nozzle holder I made that was attached using superglue. Revised model allows for the use of zip ties to mount to stubby handle.
ATTENTION! Before reporting this design again as copy of someone else because this looks similar please try to make your own version that doesn't look similar. You can't change the mounting points, filament path or nozzle height if you…
Note: the press-fit is sensitive to pressure advance and printer dimensional accuracy. (You can also use the negative shape slicer tool to add labels)
A simple holder for a silicon nozzle cleaning brush. Tested on Voron 2.4 (350 mm), but it may fit other printers with 2020 extrusions. Features: • Securely holds the brush for nozzle cleaning/purging • Compact and quick to print Print…
🧰 Nozzle Brush Bedstop + Bedstop A compact set of parts that combine a silicone nozzle cleaning brush with a bedstop, plus a matching bedstop for the opposite side. ✅ Compatibility • Tested on LDO Voron 2.4 (350 mm) • Should also fit…
