1 / 5
Revo Connect ~ A modular system for storing Revo nozzles — zdjęcie 1
1 / 5

Revo Connect ~ A modular system for storing Revo nozzles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modular, customisable nozzle holders for RapidChange Revo nozzles.

Ocena
4,865 / 5
Polubienia
351
Pobrania
2692
Wydruki
178
Wyświetlenia
7778
Oceny
148

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

MODEL DETAILS

Modular, customisable nozzle holders for RapidChange Revo nozzles.
Mounting options for different printers can be found on our Printables profile.

Size Information:
Each Revo Nozzle is engraved with its size. It can be found by removing the sock.

  • 0.15 Nozzle = Pink Sock
  • 0.25 Nozzle = Yellow sock
  • 0.4 Nozzle = Red sock
  • 0.6 Nozzle = Blue sock
  • 0.8 Nozzle = Green sock
  • 1.0 Nozzle = Black sock
  • 1.2 Nozzle = Purple sock
  • 1.4 Nozzle = Orange sock

 

RECOMMENDED PRINT SETTINGS

These are the recommended print settings. Tolerances may still work with larger Nozzles/Layer heights but you will lose some of the finer details.

  • 0.4 Nozzle or smaller
  • 0.2 Layer height or smaller
  • No support material is required.
     

DESIGNER

Designed by Will Hardy. 


Check out E3D!
 

Tagi